Polycom®
KIRK®
4020/4040
User Guide
1408 8700-ed11_Polycom 17-08-2011 10:20 Page 1
Congratulations on your new KIRK handset
Your new KIRK handset will provide you with the greatest possible degree of flexi...
Contents:
1. Construction .......................................................................... 4
2. Battery installa...
1. Construction
4
Key for internal calls
(not used on KIRK Wireless Server)
Loud speaking (only KIRK 4040)
Keyboard LOCK
(...
2. Battery installation
The battery is connected to the handset when it is shipped from the factory. To change the battery...
3. Charging
During normal operation, it takes approximately 3 1/2 hours to charge the handset from fully discharged to its...
7
4. Key Functions
The handset has 21 keys:
Two keys are placed at the right side for volume control. Press upper or lower...
8
“INT” - If residential systems: Internal calls off hook
(not used on KIRK Wireless Server)
Turns loudspeaking on and off...
9
5. Turning the handset ON/OFF
ON: Press -key for 1/2 second.
When the handset is turned on the symbol is shown in the lo...
10
6. Making a call
For making or receiving calls the handset has to be subscribed to a system ( shown in display) (see Ch...
11
Redial:
Redial / CLIP (CLIP = Calling Line Identification Presentation) stack:
Press the < -key (REDIAL) to enter the r...
Please note: If the Date and Time function is supported, then date and time of the incoming or outgoing call is
shown in t...
6.2 During conversation
6.2.1 Volume regulation:
Use the two keys placed at the right side of the handset for volume contr...
14
7. Menu structure
Pressing the MENU-key, enters or exits the menu structure. It has to be used if a “NO” or “CLEAR” is ...
15
7.1 Using the alphanumeric keyboard
The normal dialling keys (0-9) are used for writing the name to be placed in the te...
16
7.2 The key functions
Key Capital letter Small letter
1 ? ! 1 - + * / = & ( ) % ¿ ¡ ? ! 1 - + * / = & ( ) % ¿ ¡
2 A B C...
17
7.3 Profile set-up
To set-up the handset press MENU. You are now able to switch between the different settings. Press 3...
18
Profile set-up (fig)
KIRK telecom
SET PROFILE
ADVANCED
SET PROFILE
RINGER TONE
SET PROFILE
RINGER VOL
SET PROFILE
KEY C...
19
7.4 Profile functions
RINGERTONE: Scroll through the 9 different ringertones using < and >. Confirm with 3.
RINGER VOL:...
20
OUT OF RANGE: The out of range indication can be turned on/off using < and >. Confirm with 3. With the out of
range ind...
21
7.5 Menu subscription and login
Password is factory set at 0000
SELECT LOGIN
SYSTEM 1
123456789015
CREATE
SEARCH ID:
12...
22
7.5.1 Create subscription
To make subscriptions, the system must allow subscriptions to be made. Some systems also requ...
23
7.5.2 Login
The handset can be subscribed to 10 different systems enabling you to use the same handset on 10 different ...
24
7.5.3 Auto login
The handset can be subscribed to 10 different systems.
If a handset is subscribed to two or more syste...
If a handset is subscribed to two systems only, you can use Auto Login B to change between the two systems auto-
matically...
7.5.4 Remove subscription
Subscriptions can be removed from the system in use and from the 9 other systems (if connected)....
27
7.6 Battery capacity
In the Battery Menu it is possible to see the remaining battery capacity. For reading the correct ...
28
7.7 Redial
The handset has maximum 10 redial numbers and 10 Caller ID/MISSED CALL numbers placed in the same stack.
Eac...
29
The Redial and CLIP stack Menu (fig)
KIRK telecom
REDIAL
75602850
CLIP
898
DELETE?
899
STORE NO.?
899
DELETE ALL?
NAME:...
30
7.8 Book
Storing a number (max. 24 digits) in the telephone book is done by pressing the number to be stored (in on hoo...
31
Read BOOK numbers: The telephone book is entered by pressing > (BOOK). For quick-search: press the first letter
of the ...
32
7.9 External services
External services are features placed in the main system, and only available if the handset is su...
33
7.10 MSF Functions
MSF Functions are special functions, which are based on MSF (Message Service Function). The function...
34
7.11 Mail/Text Messages
Available in systems configured with the possibility of sending text messages
At the reception ...
35
Read a mail
Press the R-key (MAIL) followed by the 3-key or enter the Mail Menu (in on hook condition).
If the message ...
36
Delete a mail
Open the mail by pressing the R-key followed by the 3-key, press the 3-key again and use the < > -keys to...
37
N25-01 04.38
308
Temp 45° ..
L26-01 14.32
319
Hello, its me..
N28-01 15.46
236
FIRE ALARM..
WRITE NEW
MAIL?
√19-01 09.5...
38
7.12 Speed dial
Please note: To use the speed dial function it is necessary to set “LONG KEY” to “SPEED DIAL” (see Chap...
8. Date and Time Function
The Date and Time function requires the use of a KIRK Wireless Server and special software in th...
40
9. Language
There are 10 predefined languages in the handset: English, German, French, Italian, Spanish, Dutch, Portugu...
41
10. Advanced settings
AUTO HOOK: Can be turned on/off using < and >. Confirm with 3. When turned on, the handset automa...
42
A. KEY DELAY: Used to define the time for how long the alarm key should be pressed before the alarm key function is
exe...
43
Advanced settings (fig)
ADVANCED
AUTO HOOK
ADVANCED
ANY KEY ANSW
ADVANCED
LONG KEY
ADVANCED
LONG KEY TIM
ADVANCED
A. KE...
44
11. Shortcuts
”KEY LOCKED”: Press: MENU ✱. (Display shows )
”SILENT”: Press: MENU #. (No sounds) (Display shows )
“PHON...
45
12. Information
12.1 Error tree
Problem Check
The telephone freezes Remove and replace the battery pack. Press to turn ...
46
12.2 Error information
Improper function of the handset might be related to the installation of the KIRK solution or fa...
LIMITED WARRANTY. Polycom warrants to the end user (“Customer”) that the product will be free from defects
in workmanship ...
EXCLUSIONS. Polycom will not be liable under this limited warranty if its testing and examination disclose that
the allege...
PURPOSE, SATISFACTORY QUALITY, CORRESPONDENCE WITH DESCRIPTION, AND NON-INFRINGE-
MENT, ALL OF WHICH ARE EXPRESSLY DISCLAI...
OUT OF OR IN CONNECTION WITH THE SALE, INSTALLATION, MAINTENANCE, USE, PERFORMANCE,
FAILURE, OR INTERRUPTION OF ITS PRODUC...
END-USER LICENSE AGREEMENT FOR POLYCOM SOFTWARE
IMPORTANT - READ CAREFULLY BEFORE USING THE SOFTWARE PRODUCT:
This End-Use...
1. GRANT OF LICENSE.
Subject to the terms of this Agreement, POLYCOM grants to you a non-exclusive license to install and ...
2.2 Back-up. Except as expressly provided for under this Agreement you may not copy the SOFTWARE PRO-
DUCT; except, howeve...
2.6 Copyright. All title and copyrights in and to the SOFTWARE PRODUCT (including but not limited to any images,
photograp...
3. SUPPORT SERVICES.
POLYCOM may provide you with support services related to the SOFTWARE PRODUCT("SUPPORT SERVICES
"). U...
5. UPGRADES.
If the SOFTWARE PRODUCT is labeled as an upgrade, you must be properly licensed to use the software identifie...
obligation under this express warranty shall be, at POLYCOM's option and expense, to refund the purchase price
paid by you...
IN CONNECTION WITH THE SALE, INSTALLATION, MAINTENANCE OR USE OF THIS SOFTWARE PRO-
DUCT. POLYCOM SHALL NOT BE LIABLE UNDE...
DAMAGES. IN ANY CASE, POLYCOM'S ENTIRE LIABILITY SHALL BE LIMITED TO THE GREATER OF THE
AMOUNT ACTUALLY PAID BY YOU FOR TH...
which the U.S. has embargoed goods; or (ii) to anyone on the U.S. Treasury Department’s list of Specially Designa-
ted Nat...
10.3 Contact. If you have any questions concerning this Agreement, or if you desire to contact POLYCOM for any
reason, ple...
62
12.4. Technical information
Approvals
Acoustics: TBR10
Electrical: TBR6 (DECT RF)
Access profile: TBR 22 (GAP)
EMC: EN ...
63
This KIRK product has been marked with the CE mark. This mark indicates compliance with
EEC Directives 89/336/EEC, 73/2...
64
Eesti [Estonian]: Käesolevaga kinnitab Polycom (UK) Ltd seadme KIRK 4020 / 4040 handset vastavust direktiivi
1999/5/EÜ ...
65
Lietuvių [Lithuanian]: Šiuo Polycom (UK) Ltd deklaruoja, kad šis KIRK 4020 / 4040 handset atitinka esminius reikalavimu...
66
Slovensky [Slovak]: Polycom (UK) Ltd týmto vyhlasuje, že KIRK 4020 / 4040 handset spĺňa základné požiadavky a všetky
pr...
67
12.5.1 Important Safety Instructions
Before using your telephone equipment, you should always follow basic safety instr...
68
11. Avoid using telephone during an electrical storm. There may be a risk of electrical shock from lightning.
12. Do no...
69
Battery Precautions
1. Periodically clean the charge contacts on both the charger and handset.
2. Exercise care in hand...
70
FCC Note: This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1)...
71
NOTE EMC: Cet appareil a été soumis à un essai et jugé conforme aux normes régissant les limites établies pour un dis-p...
72
12.5.2 Limited Warranty
This limited, non-transferable warranty is provided to the original purchaser. The product is w...
73
is used in a country in which it is not registered for use, or if it is used in a country for which it was not designed...
1408 8700-ed11_Polycom 17-08-2011 10:23 Page 74
1408 8700-ed11_Polycom 17-08-2011 10:23 Page 75
©2007Polycom,Inc.Allrightsreserved.
Specificationssubjecttochangewithoutnotice.
PolycomHeadquarters
4750WillowRoad
Pleasan...
of 76

Polycom Kirk 4020 4040 user guide

Polycom Kirk 4020 4040 user guide http://www.best4systems.co.uk/polycom/polycom-kirk
Published on: Mar 6, 2016
Published in: Technology      
Source: www.slideshare.net


Transcripts - Polycom Kirk 4020 4040 user guide

  • 1. Polycom® KIRK® 4020/4040 User Guide 1408 8700-ed11_Polycom 17-08-2011 10:20 Page 1
  • 2. Congratulations on your new KIRK handset Your new KIRK handset will provide you with the greatest possible degree of flexibility and mobility due to high battery capacity, low weight, practical size and design. 1408 8700-ed11_Polycom 17-08-2011 10:20 Page 2
  • 3. Contents: 1. Construction .......................................................................... 4 2. Battery installation................................................................ 5 3. Charging................................................................................. 6 4. Key functions......................................................................... 7 5. Turning the handset ON/OFF............................................ 9 6. Making a call.......................................................................... 10 6.1 Receiving calls ................................................................. 12 6.2 During conversation ...................................................... 13 6.2.1 Volume regulation................................................. 13 6.2.2 Microphone mute .................................................. 13 6.2.3 Transferring the call to another handset............ 13 7. Menu structure ...................................................................... 14 7.1 Using the alphanumeric keyboard............................... 15 7.2 The key functions............................................................ 16 7.3 Profile set up.................................................................... 17 7.4 Profile functions .............................................................. 19 7.5 Menu subscription and login ........................................ 21 7.5.1 Create subscription ............................................... 22 7.5.2 Login........................................................................ 23 7.5.3 Auto login............................................................... 24 3 7.5.4 Remove subscription............................................. 26 7.5.5 Change startup text............................................... 26 7.6 Battery capacity ............................................................... 27 7.7 Redial ................................................................................ 28 7.8 Book................................................................................... 30 7.9 External services.............................................................. 32 7.10 MSF Functions............................................................... 33 7.11 Mail/Textmessages....................................................... 34 7.12 Speed dial....................................................................... 38 8. Date and Time function ....................................................... 39 9. Language ................................................................................ 40 10. Advanced settings................................................................. 41 11. Shortcuts................................................................................. 44 12. Information ............................................................................ 45 12.1 Error tree ........................................................................ 45 12.2 Error information.......................................................... 46 12.3 Polycom© Product Warranty Statement .................... 46 12.4 Technical Information .................................................. 62 12.5 International Regulatory and Product Information 63 12.5.1 Important Safety Instructions............................ 67 12.5.2 Limited Warranty................................................ 72 1408 8700-ed11_Polycom 17-08-2011 10:20 Page 3
  • 4. 1. Construction 4 Key for internal calls (not used on KIRK Wireless Server) Loud speaking (only KIRK 4040) Keyboard LOCK (Menu*) MENU key Display with backlight Recall key (MAIL key) SILENT (Menu#) ON/OFF HOOK key- also used as turn on key CONFIRMATION key - MUTE microphone. MUTE ringer when ringing. Long key press turns off Right arrow key, save number. Phone book Menu from stand- by text Left arrow key, Redial Menu from standby text Volume up/down LED Alarm key Headset Connector (only KIRK 4040) 1408 8700-ed11_Polycom 17-08-2011 10:20 Page 4
  • 5. 2. Battery installation The battery is connected to the handset when it is shipped from the factory. To change the battery you must unscrew the plate on the rear of the handset to access the battery compartment. 5 To remove the battery cover, use a normal screw driver. Insert it into the small crack behind the blind cover and break to open the handset. Please note: The product label, including the CE logo, can be found in the battery compartment. 1408 8700-ed11_Polycom 17-08-2011 10:20 Page 5
  • 6. 3. Charging During normal operation, it takes approximately 3 1/2 hours to charge the handset from fully discharged to its full capacity. Place the handset in the charger. When the handset is turned on, the display shows the charging status in line 3. For correct charging be sure the room temperature is between 0°C and 25°C. Do not place the handset in di- rect sunlight. The battery has a built-in heat sensor which will stop charging if the battery temperature is too high. It is necessary to recharge the battery when the display shows “BATTERY LOW”, or if it can not be turned on. The LED flashes at a low frequency while charging and lights constantly when the charging is finished. The display goes back to normal mode when fully charged. When the handset is placed in the charger it will not vibrate, and B-answer is inactive. If the battery is fully dis- charged, up to 10 min. may pass before charging begins and the handset can be turned on. When the charger begins the charging, status is shown in the 3rd line of the display and the LED flashes slowly. 6 KIRK telecom zzzzzzzzz . . . . 1408 8700-ed11_Polycom 17-08-2011 10:20 Page 6
  • 7. 7 4. Key Functions The handset has 21 keys: Two keys are placed at the right side for volume control. Press upper or lower key to change the volume. Each key-press turns volume one step up/down. “MENU” - Go to menu structure or exits the menu structure. (Escape or “NO”) ” < ”, “REDIAL” - Menu: left, Cursor left, after a digit: delete last digit. Long press: delete all From standby text: Redial Menu ” > ”, “BOOK” - Menu: right, Cursor right, After a digit: Store number in telephone book From standby text: Telephone book read “✓”, “MUTE” - Confirmation (“YES”) or jump to next level in the menu. In off hook: Mute microphone In on hook: Mute ringer. Long key press turns the handset OFF 1408 8700-ed11_Polycom 17-08-2011 10:20 Page 7
  • 8. 8 “INT” - If residential systems: Internal calls off hook (not used on KIRK Wireless Server) Turns loudspeaking on and off in off hook (only KIRK 4040) “R” - If off hook: Recall. If on hook: Read or write message “ ” - On hook/off hook and turn ON ” ✱ ” - * (Change from pulse to DTMF on KIRK Wireless Server), Long = pause (-), extra long: change from pulse to DTMF (a ”T” appears in the display, GAP standard) “0-9” - Digits or letters in alphanumeric mode (names and messages) “ ✱ “ - ✱, Choose uppercase or lowercase letters in alphanumeric mode 1408 8700-ed11_Polycom 17-08-2011 10:20 Page 8
  • 9. 9 5. Turning the handset ON/OFF ON: Press -key for 1/2 second. When the handset is turned on the symbol is shown in the lower left corner of the display, if the handset is subscribed to a system. (For subscription, see Chap. 7.5.1) OFF: Press the 3-key (MUTE) for 3 seconds Please note: When the handset has been outside the coverage area, it can take up to 30 seconds before the handset is back on the system after re-entering the coverage area. 1408 8700-ed11_Polycom 17-08-2011 10:20 Page 9
  • 10. 10 6. Making a call For making or receiving calls the handset has to be subscribed to a system ( shown in display) (see Chap. 7.5.1). Press the -key, the -icon in the display will flash until connection is established. Dial the number. Pre-dial: Press the number to dial (long press on ✱ will make a pause, if necessary). Press the -key, the -icon will flash until the connection is established. Telephone book: Press the > -key (BOOK) to enter the telephone book. Search for the number either by using the < or > -keys or by pressing the first letter in the name by using the digits 1 – 9 (see Chap. 7.2). Press the -key, the -icon will flash until the connection is established. 1408 8700-ed11_Polycom 17-08-2011 10:21 Page 10
  • 11. 11 Redial: Redial / CLIP (CLIP = Calling Line Identification Presentation) stack: Press the < -key (REDIAL) to enter the redial/CLIP stack. Search for the number by using the < or > -keys, redial numbers are marked with “REDIAL” or name and clip numbers are marked either with “CLIP” or the name of the person who called and the LED is on. Press the -key, the -icon will flash until the connection is established. Using the handset in residential systems: (not on KIRK Wireless Server) Internal call post-dial: Press the INT-key, the -icon in the display will flash. Dial the number of another handset on the base station, the -icon will flash until the connection is established. Internal call pre-dial: (not on KIRK Wireless Server) Press the number of another handset on the base station. Press the INT-key, the -icon will flash until the connection is established. 1408 8700-ed11_Polycom 17-08-2011 10:21 Page 11
  • 12. Please note: If the Date and Time function is supported, then date and time of the incoming or outgoing call is shown in the CLIP/Redial stack on the 4th line of the display. See Chap. 8 for more information. Speed dial: See Chap. 7.12 and Chap. 10 for more information about speed dialing. 6.1. Receiving calls If the phone rings, the call can be answered by pressing the -key. When ringing the LED flashes fast, and the display shows the CLIP (if presented). If it is an external call (or if no CLIP) the display shows “INCOMING CALL”. It is possible to stop the ring signal without answering the call. Press MUTE (3) and the ring signal is muted. Display shows: “RINGER MUTED“. 12 1408 8700-ed11_Polycom 17-08-2011 10:21 Page 12
  • 13. 6.2 During conversation 6.2.1 Volume regulation: Use the two keys placed at the right side of the handset for volume control. 6.2.2 Microphone mute: Press the 3-key (MUTE), “MIC. MUTED” is showed in the display. Press the 3-key (MUTE) to enable the microphone again. 6.2.3 Transferring the call to another handset: Press the R-key, and dial new number. Press the -key and the call is transferred to the other handset. 13 1408 8700-ed11_Polycom 17-08-2011 10:21 Page 13
  • 14. 14 7. Menu structure Pressing the MENU-key, enters or exits the menu structure. It has to be used if a “NO” or “CLEAR” is wanted in the menu structure. Pressing the 3-key, jumps to a lower level in the menu. When the lowest menu level is reached, it will store the setting and jump to a higher level. It has to be used if a “YES” is wanted. The Phone book Menu, Redial Menu and Mail Menu can be accessed directly. The Phone book Menu by pressing the > -key (BOOK), the Redial Menu by pressing the < -key (REDIAL), and the Mail Menu by pressing the R-key (MAIL). MENU LOGIN MENU MSF FUNCTION PROFILE SET-UP MENU EXT. SERVICE MENU BATTERY MENU PHONE BOOK MENU REDIAL MENU MAIL KIRK telecom MENU MENU SPEED DIAL 1408 8700-ed11_Polycom 17-08-2011 10:21 Page 14
  • 15. 15 7.1 Using the alphanumeric keyboard The normal dialling keys (0-9) are used for writing the name to be placed in the telephone book. By pressing the keys a certain number of times the related letters or digits will appear in the display. Spaces are made by using the 0-key. Key ✱ changes between uppercase and lowercase letters. The arrows will move the cursor. Left arrow is also used for deleting (hold for 1 sec.) = delete. New letters can be inserted. Change of key press and pauses lasting more than 1 second automatically moves the cursor to next position. Please note: 4th line of the display shows the possible alphanumeric keys. 1408 8700-ed11_Polycom 17-08-2011 10:21 Page 15
  • 16. 16 7.2 The key functions Key Capital letter Small letter 1 ? ! 1 - + * / = & ( ) % ¿ ¡ ? ! 1 - + * / = & ( ) % ¿ ¡ 2 A B C 2 Ä Å À Á Ã Æ Ç a b c 2 ä å à á ã æ ç 3 D E F 3 È É Ê Ë d e f 3 è é ê ë 4 G H I 4 Ì Í Î Ï g h i 4 ì í î ï 5 J K L 5 j k l 5 6 M N O 6 Ñ Ö Ò Ó Ô Õ Ø m n o 6 ñ ö ò ó ô õ ø 7 P Q R S 7 ß p q r s 7 ß 8 T U V 8 Ü Ù Ú Û t u v 8 ü ù ú û 9 W X Y Z 9 w x y z 9 0 [Space] , . 0 : ; _ “ ‘ ˆ ˜ [Space] , . 0 : ; _ “ ‘ ˆ ˜ ✱ A➞a A➞a # # @ E $ £ ¥ § < > { | } [ ] # @ E $ £ ¥ § < > { | } [ ] 1408 8700-ed11_Polycom 17-08-2011 10:21 Page 16
  • 17. 17 7.3 Profile set-up To set-up the handset press MENU. You are now able to switch between the different settings. Press 3 when you find the setting you wish to change (or see). Change the setting according to your needs, confirm with 3 and you automatically go to the next setting. Press MENU to finalize the setup. 1408 8700-ed11_Polycom 17-08-2011 10:21 Page 17
  • 18. 18 Profile set-up (fig) KIRK telecom SET PROFILE ADVANCED SET PROFILE RINGER TONE SET PROFILE RINGER VOL SET PROFILE KEY CLICK SET PROFILE VIBRATOR SET PROFILE B-ANSWER SET PROFILE START VOLUME SET PROFILE OUT OF RANGE ADVANCED RINGER TONE 1,2......... RINGER VOL zzzzz KEY CLICK zzzzz - - - VIBRATOR ON/OFF B-ANSWER ON/OFF START VOLUME zzzzz OUT OF RANGE TONE ON/OFF PROFILE SET UP SET PROFILE AUTO KEYLOCK AUTO KEYLOCK ON/OFF SET PROFILE LANGUAGE LANGUAGE ENGLISH SET PROFILE BACKLIGHT BACKLIGHT ON/OFF KIRK 4040 only 1408 8700-ed11_Polycom 17-08-2011 10:21 Page 18
  • 19. 19 7.4 Profile functions RINGERTONE: Scroll through the 9 different ringertones using < and >. Confirm with 3. RINGER VOL: Turn the volume up and down using < and >. Confirm with 3. KEY CLICK: Turn the volume up and down using < and >. Confirm with 3. VIBRATOR: Can be turned on/off using < and >. Confirm with 3 (vibrator only works on KIRK 4040). B-ANSWER: Can be turned on/off using < and >. Confirm with 3. When turned on, the telephone automatically goes off hook when ringing. If subscribed to a KIRK solution it automatically goes on hook when calls are terminated. B-answer is inactive when handset is placed in the charger. REMARK: Automatic on-hook is only reliable under defined conditions related to the interface settings between the KIRK Wireless Server and the PBX. START VOL: Start volume can be adjusted using < and >. Confirm with 3. 1408 8700-ed11_Polycom 17-08-2011 10:21 Page 19
  • 20. 20 OUT OF RANGE: The out of range indication can be turned on/off using < and >. Confirm with 3. With the out of range indicator turned on, a beep will appear when the telephone is moving out of range of the base station, and “OUT OF RANGE” will appear in the display. AUTO KEYLOCK: The auto keylock function can be turned on/off using < and >. Confirm with 3. With auto keylock turned on the handset will automatically lock the keys after 30 seconds. Press MENU ✱ to activate the keys again. LANGUAGE: see Chap. 9. BACKLIGHT: Can be turned on/off using < and >. Confirm with 3. ADVANCED: see Chap. 10. 1408 8700-ed11_Polycom 17-08-2011 10:21 Page 20
  • 21. 21 7.5 Menu subscription and login Password is factory set at 0000 SELECT LOGIN SYSTEM 1 123456789015 CREATE SEARCH ID: 123456789012 CREATE SYSTEM 2 MENU LOGIN MENU SELECT LOGIN SUBSCRIPTION CREATE SUBSCRIPTION REMOVE REMOVE? PASSWORD _ _ _ _ _ SUBSCRIPTION REMOVE 123456789015 REMOVE SYSTEM 2 SUBSCRIPTION REMOVE 1408 8700-ed11_Polycom 17-08-2011 10:21 Page 21
  • 22. 22 7.5.1 Create subscription To make subscriptions, the system must allow subscriptions to be made. Some systems also require an Access Code (AC). If more than one system currently permits subscription, you will need to know the ID of the system to which you wish to subscribe. Access Codes and system ID’s will be provided by the system administrator. Choose the “SUBSCRIPTION CREATE” function to subscribe to a new system (see Chap. 7.5/7.5.4). Use the < and > keys to scroll between the ID’s of the different systems available. During subscription the handset will search for free positions and perform subscription on the first free position. An alternative position can be choosen using < or >. Enter the AC (if required) using the keyboard, and press 3. If the subscription was successful, the startup text will be replaced by the standby text given into the system by the system administrator and is shown in the display. If not, the subscription has failed and the procedure must be retried. If the handset is already subscribed to 10 systems, you will have to remove a subscription before creating a new subscription (see Chap. 7.5.3). 1408 8700-ed11_Polycom 17-08-2011 10:22 Page 22
  • 23. 23 7.5.2 Login The handset can be subscribed to 10 different systems enabling you to use the same handset on 10 different systems. If you would like to change to another system, use the Login Menu to connect to another system number. The actual chosen system is marked with a ✱. To change to another system use < or > and press 3 to confirm. To be able to log on to a system, subscription to the system has to be established (See Chap. 7.5.1). Under LOGIN/SELECT LOGIN only subscriptions will be shown. Free positions will not be shown. MENU SELECT LOGIN SUBSCRIPTION CREATE SUBSCRIPTION REMOVE SELECT LOGIN SYSTEM 1 123456789015 SELECT LOGIN SYSTEM 2* 123456789012 SELECT LOGIN SYSTEM 3 123456789013 SELECT LOGIN SYSTEM 4 123456789014 SELECT LOGIN AUTO A SELECT LOGIN AUTO B 1408 8700-ed11_Polycom 17-08-2011 10:22 Page 23
  • 24. 24 7.5.3 Auto login The handset can be subscribed to 10 different systems. If a handset is subscribed to two or more systems, you can use Auto Login A to change between the systems auto- matically. The selected system is marked with an “A”. Please note: Auto login A should only be used in separate systems without overlaps. If a handset looses signal from the system (the display showing “OUT OF RANGE”), then after 20 seconds the handset will start searching for an alternative system available from the Login list and automatically change to this system. Changing between systems can only take place while on hook. Any call will be dropped when changing to an alternative system. 1408 8700-ed11_Polycom 17-08-2011 10:22 Page 24
  • 25. If a handset is subscribed to two systems only, you can use Auto Login B to change between the two systems auto- matically. The selected system is marked with a “B”. Please note: Auto login B can be used in separate systems which are overlapping each other. As soon as the hand- set has measured a low radio signal 5 times in succession, it will start up the Auto login B procedure and change to an alternative system if available. Changing between two systems can only take place while on hook. Any call will be dropped when changing to an alternative system. 25 1408 8700-ed11_Polycom 17-08-2011 10:22 Page 25
  • 26. 7.5.4 Remove subscription Subscriptions can be removed from the system in use and from the 9 other systems (if connected). Removing a sub- scription requires a password. Password is factory set at 0000. If the system in use is removed, it is necessary either to select one of the remaining systems or to subscribe to a new one. If one of the systems not chosen is removed, the handset remains connected to the system in use. 7.5.5 Change startup text The startup text is predefined as e.g. ”KIRK telecom” as factory default. This can be changed by using the follo- wing procedure: Press ✱✱✱✱, BOOK, 3 and enter the new startup text using the keyboard followed by 3. It is possible to insert 24 characters. 26 1408 8700-ed11_Polycom 17-08-2011 10:22 Page 26
  • 27. 27 7.6 Battery capacity In the Battery Menu it is possible to see the remaining battery capacity. For reading the correct capacity, the hand- set has to be removed from the charger for at least one hour. Press MENU and use the < or > keys to reach the Bat- tery Menu. Press 3 to enter the menu, and you can see the current status of the battery capacity. Press 3 to return to the menu system or press MENU to quit. The indication on the display is not necessarily an exact reflection on the remaining speech time, but only an indi- cation of the voltage on the battery. KIRK telecom MENU BATTERY BATTERY CAPACITY zzzzz 1408 8700-ed11_Polycom 17-08-2011 10:22 Page 27
  • 28. 28 7.7 Redial The handset has maximum 10 redial numbers and 10 Caller ID/MISSED CALL numbers placed in the same stack. Each number is only represented once. Enter the Redial Menu by pressing the < -key (REDIAL) from the standby text. Repeated presses at the < -key turn backward through the dialled numbers and CLIP numbers (from newest to the oldest). The > -key moves in the opposite direction. It is also possible to reach the Redial Menu in the main menu. Numbers are named “REDIAL”, ”CLIP” or with the name. The LED will flash slowly and the display shows “MISSED CALL” if a new number has arrived in the CLIP stack. Press the < -key (REDIAL) to see the missed call. If no number (no clip) is represented by a call only the LED will flash slow afterwards. If you want to delete a ”CLIP” or a ”REDIAL” you scroll to the name/number and press 3 twice. The name/number is now deleted. If number is stored, it is moved to the telephone book. You can also delete all name/numbers using the “DELETE ALL?” function. It is possible to edit the CLIP or REDIAL numbers. Find the number you wish to edit and press the digits you want to add to the number, e.g. prefix = O. 1408 8700-ed11_Polycom 17-08-2011 10:22 Page 28
  • 29. 29 The Redial and CLIP stack Menu (fig) KIRK telecom REDIAL 75602850 CLIP 898 DELETE? 899 STORE NO.? 899 DELETE ALL? NAME: BILL GATES 899 < 1408 8700-ed11_Polycom 17-08-2011 10:22 Page 29
  • 30. 30 7.8 Book Storing a number (max. 24 digits) in the telephone book is done by pressing the number to be stored (in on hook), then press the > -key followed by the 3-key. The book can store up to 200 numbers with name. Typing of the name and a confirmation is required. After storing the telephone will go back to standby mode. If the display shows “MEMORY FULL”, it is necessary to delete one or more numbers from the telephone book. (See menu structure page 31) NAME: KIRK TELECOM STORE NO.? 75602850 75602850 KIRK telecom > 75602850 BOOK 1408 8700-ed11_Polycom 17-08-2011 10:22 Page 30
  • 31. 31 Read BOOK numbers: The telephone book is entered by pressing > (BOOK). For quick-search: press the first letter of the name (using 1-9)(see Chap. 7.2). Call the displayed person by pressing the -key. It is also possible to reach the Phone book Menu in the main menu. Viewing and editing the telephone book can also be done while in conversation. KIRK telecom BILL JENSEN 899 CARL NIELSEN 7561XXXX PHILIP HANSEN 8614XXXX CLAUS PEDERSEN 134 DELETE? 7561XXXX EDIT NO.? 7561XXXX EDIT NAME? CARL NIELSEN > BOOK 1408 8700-ed11_Polycom 17-08-2011 10:22 Page 31
  • 32. 32 7.9 External services External services are features placed in the main system, and only available if the handset is subscribed to a KIRK solution. Under External services can be found; “View Clip Stack”, “Delete Clip Stack” and “Local Phone Book”. The Local Phone Book is a common phone book for all handsets subscribed to the actual system, and all handsets subscribed to the system are listed in the phone book. Additional numbers can be added to the phone book by the system administrator. 1408 8700-ed11_Polycom 17-08-2011 10:22 Page 32
  • 33. 33 7.10 MSF Functions MSF Functions are special functions, which are based on MSF (Message Service Function). The functions require special software in the main system. 1408 8700-ed11_Polycom 17-08-2011 10:22 Page 33
  • 34. 34 7.11 Mail/Text Messages Available in systems configured with the possibility of sending text messages At the reception of a text message the envelope icon appears in the display. The envelope icon is indicating one or more unread messages. The text message is shown in the display, and when the message is read the envelope icon will disappear. If the message contains a call-back number, this will be displayed on the bottom line of the display. As long as the call-back number is in the display, it is possible to activate the number by pressing the -key. 1st letter in the display, in front of the timestamp, shows the message status: read (R), unread (N) or locked (L). Mails include a maximum of 72 letters or digits (2 display screens of 36 each). Call-back number is max. 24 digits (or letters for E-mail). 14 messages can be ”stored” in the handset. When receiving a new message, the oldest unlocked will be deleted. Loc- ked messages will not automatically be overwritten, but can manually be deleted. Maximum 7 messages can be locked. 1408 8700-ed11_Polycom 17-08-2011 10:22 Page 34
  • 35. 35 Read a mail Press the R-key (MAIL) followed by the 3-key or enter the Mail Menu (in on hook condition). If the message includes more than 36 letters or digits, the message will run over 2 display screens. Use the > -key to scroll. To see the sender of the mail, press the 3-key. To leave the mail, press the MENU-key. Reply a mail Open the mail by pressing the R-key followed by the 3-key, press the 3-key again and use the < > -keys to find the reply feature, press the 3-key and you are then able to reply the mail. After writing your reply press the 3-key to confirm. Forward a mail Open the mail by pressing the R-key followed by the 3-key, press the 3-key again and use the < > -keys to find the for- ward feature, press the 3-key twice and you are then able to write the number on the receiver. Confirm with the 3-key. Delete all mail Open the mail stack by pressing the R-key followed by the 3-key, press the 3-key again and use the < > -keys to find the delete feature, press the 3-key and all mails are deleted. 1408 8700-ed11_Polycom 17-08-2011 10:22 Page 35
  • 36. 36 Delete a mail Open the mail by pressing the R-key followed by the 3-key, press the 3-key again and use the < > -keys to find the delete feature, press the 3-key and the mail is deleted. Lock/unlock a mail Open the mail by pressing the R-key followed by the 3-key, press the 3-key again and use the < > -keys to find the lock/unlock feature, press the 3-key and the mail is locked/unlocked. Write a mail To write a new mail press the R- key (MAIL), confirm with the 3-key and write your message. To send the mail press the 3-key, type the number of the receiver and confirm with the 3-key. If one or more mails are stored do as followed: Press the R-key (MAIL) followed by the > -key confirm with the 3- key and write your message. Press the 3-key, type the number of the receiver and confirm with the 3-key. The message is sent. Note In case a sent message is not received, the sender will get a message in the display. 1408 8700-ed11_Polycom 17-08-2011 10:22 Page 36
  • 37. 37 N25-01 04.38 308 Temp 45° .. L26-01 14.32 319 Hello, its me.. N28-01 15.46 236 FIRE ALARM.. WRITE NEW MAIL? √19-01 09.56 htj@kirktelec I am working.. Hello it’s me. Yo can meet me at 15 o’clock if you want to. DELETE MAIL? SENDER: 319 (UN)LOCK MAIL? REPLY MAIL? FORWARD MAIL? - - - - PHONENO: 236 E-MAIL: htj@kirktelecom.dk KIRK telecom MAIL The Mail Menu (fig) DELETE ALL MAIL? N 206 Meet me at 9 .. √20-01 10.13 319 Call me.. 1408 8700-ed11_Polycom 17-08-2011 10:22 Page 37
  • 38. 38 7.12 Speed dial Please note: To use the speed dial function it is necessary to set “LONG KEY” to “SPEED DIAL” (see Chap 10). The speed dial list has maximum 11 speed dial numbers. Calling a number from the speed dial list is done by pres- sing the 0,1,2...9 key with a long key press or by pressing the alarm button key. If no number is assigned to the key it is possible to enter a new number. The number is added to the speed dial list automatically. To store a number (max. 23 digits) in the speed dial list press MENU and use the < or > keys to reach the Speed dial Menu. Press 3 to enter the menu. Use the < or > keys to scroll between the list numbers, enter the number and then confirm with 3. After storing, the telephone will go back to standby mode. To delete or change a number in the speed dial list press MENU and use the < or > keys to reach the Speed dial Menu. Press 3 to enter the menu. Use the < or > keys to scroll between the list numbers, press 3 to select the num- ber in question and then use the < key to delete the existing number. Confirm with 3 or enter a new number and then confirm with 3. 1408 8700-ed11_Polycom 17-08-2011 10:22 Page 38
  • 39. 8. Date and Time Function The Date and Time function requires the use of a KIRK Wireless Server and special software in the main system. If the Date and Time function is supported, a clock is shown in the display. The clock shows the time with an accu- racy of +/- 1 minute. If the Date and Time function is supported, then date and time of the incoming or outgoing call is also shown in the CLIP/Redial stack on the 4th line of the display. An icon + date and time shows the status of the call. If the call is missed, the date and time is displayed: 29/03 20:28 If the incoming call is received, the date and time is displayed: 29/03 20:28 If the outgoing call is made, the date and time is displayed: 29/03 20:28 Date and time is only displayed if CLIP feature is supported by the PBX. 39 1408 8700-ed11_Polycom 17-08-2011 10:22 Page 39
  • 40. 40 9. Language There are 10 predefined languages in the handset: English, German, French, Italian, Spanish, Dutch, Portuguese, Swedish, Danish and Norwegian. Select the required language by pressing the 3-key. If an 11th language is present this will be shown. This language is a specific dealer language and is factory programmed. PROFILE SET UP SET PROFILE LANGUAGE LANGUAGE ENGLISH LANGUAGE GERMAN LANGUAGE FRENCH LANGUAGE ITALIAN LANGUAGE SPANISH LANGUAGE DUTCH LANGUAGE PORTUGUESE LANGUAGE SWEDISH LANGUAGE DANISH LANGUAGE NORWEGIAN LANGUAGE OPEN 1408 8700-ed11_Polycom 17-08-2011 10:23 Page 40
  • 41. 41 10. Advanced settings AUTO HOOK: Can be turned on/off using < and >. Confirm with 3. When turned on, the handset automatically goes off hook when removed from the charger and a call is present. When placing the handset in the charger, the handset automatically goes on hook. ANY KEY ANSW: Can be turned on/off using < and >. Confirm with 3. When turned on, all keys work as a Hook key when receiving an incoming call. LONG KEY: Can be set to “SEND MSF” or “SPEED DIAL” using < and >. Confirm with 3. When choosing “SEND MSF” an MSF is sent to the KIRK Wireless Server when pressing 0,1,2...9 with a long key press or when pressing the alarm key with a long key press. When choosing “SPEED DIAL” a call is made to the assigned number when pressing 0,1,2...9 with a long key press or when pressing the alarm key with a long key press. If no number is assi- gned the alarm key it is possible to enter a new number. This number is automacally added to the speed dial list. For more information, see Chap 7.12. LONG KEY TIM: Used to define the time for how long a key (0,1,2...9) should be pressed before it is detected as a long key press. 1408 8700-ed11_Polycom 17-08-2011 10:23 Page 41
  • 42. 42 A. KEY DELAY: Used to define the time for how long the alarm key should be pressed before the alarm key function is executed. LS ON B-ANSWER: Can be turned on/off using < and >. Confirm with 3. When turned on and “B-ANSWER ON” (hands-free) is selected, the handset turns on the loudspeaker automatically (see Chap. 7.4). (Loudspeaker only works on KIRK 4040). STANDBY TEXT: Can be turned on/off using < and >. Confirm with 3. When turned off the display shows a local standby text. HEADS. ALERT: The ringer volume in headset can be set to either “OFF” or 1, 2, 3, 4, 5 (indicated by a bar) using < and >. Confirm with 3. (only works on KIRK 4040). HEADSET VOL: The volume in headset can be set to either 1, 2, 3, 4 or 5 (indicated by a bar) using < and >. Confirm with 3. (only works on KIRK 4040). OFF HOOK MSF: Can be set to either “NORMAL”, “KEY CLICK” or “KEY BEEP” using < and >. Confirm with 3. The “OFF HOOK MSF” setting only applies to the behaviour of the handset when an MSF is received and the handset is off hook. When set to “NORMAL” the alert type used is the one defined in the MSF. When set to “KEY CLICK” a key click is produced when receiving an MSF. When set to “KEY BEEP” a key beep is produced when receiving an MSF. 1408 8700-ed11_Polycom 17-08-2011 10:23 Page 42
  • 43. 43 Advanced settings (fig) ADVANCED AUTO HOOK ADVANCED ANY KEY ANSW ADVANCED LONG KEY ADVANCED LONG KEY TIM ADVANCED A. KEY DELAY ADVANCED LS ON B-ANSW ADVANCED STANDBY TEXT ADVANCED HEADS. ALERT AUTO HOOK ON/OFF ANY KEY ANSW ON/OFF LONG KEY SEND MSF/ SPEED DIAL LONG KEY TIM 1,2...9 A. KEY DELAY 0,1,2...9 LS ON B-ANSW ON/OFF STANDBY TEXT ON/OFF HEADS. ALERT ON/OFF SET PROFILE ADVANCED ADVANCED HEADSET VOL HEADSET VOL zzzzz ADVANCED OFF HOOK MSF PROFILE SET UP KIRK 4040 only OFF HOOK MSF NORMAL/KEY CLICK/KEY BEEP 1408 8700-ed11_Polycom 17-08-2011 10:23 Page 43
  • 44. 44 11. Shortcuts ”KEY LOCKED”: Press: MENU ✱. (Display shows ) ”SILENT”: Press: MENU #. (No sounds) (Display shows ) “PHONE BOOK”: Press > (BOOK) in standby Name search in telephone book: Press the first letter in name and > (BOOK) afterwards Store a number: Press > (BOOK) after the number (in on hook) “REDIAL ”and “CLIP”: Press < (REDIAL) in standby “MAIL”: Press R (MAIL) in on hook MUTE temporarily the ringer: Press 3 (MUTE) when the telephone is ringing MUTE the microphone: Press 3 (MUTE) when the telephone is off hook RECALL: Press the INT-key if residential system, else press the R-key Pause(-): Hold * for one second Change from pulse to DTMF(T): Hold ✱ for 2 seconds 1408 8700-ed11_Polycom 17-08-2011 10:23 Page 44
  • 45. 45 12. Information 12.1 Error tree Problem Check The telephone freezes Remove and replace the battery pack. Press to turn on the telephone The telephone does not ring Check whether the ringer is SILENT or RINGER VOL. is OFF The telephone cannot find a system ID at Check whether the system is set to allow subscriptions “SUBSCRIPTION CREATE” The telephone cannot subscribe even if Check if Access Code is necessary system ID has been found Not possible to turn on the telephone Check if battery is connected. If yes, charge the battery The telephone turn off when recieving a call Charge the battery. If still a problem change the battery as it might and going off-hook be defective 1408 8700-ed11_Polycom 17-08-2011 10:23 Page 45
  • 46. 46 12.2 Error information Improper function of the handset might be related to the installation of the KIRK solution or failures related to the main system. Before declaring a handset for repair be sure that the main system is operating properly. 12.3 Polycom© Product Warranty Statement The software included in this Product (including, without limitation, firmware and all updated thereto, including any software that may be downloaded electronically via the internet or otherwise (the “Software”) is licensed, not sold. Customer shall not reverse compile, disassemble or otherwise reverse engineer, embed within any other software product, or modify in any manner with respect thereto, the Software in whole or in part. THE TERMS AND CONDITIONS APPLICABLE TO POLYCOM’S LIMITED WARRANTY ARE AS SET FORTH BELOW (AND ARE ALSO INCLUDED IN THE DOCUMENTATION PACKAGED WITH NEW POLYCOM PRODUCTS): 1408 8700-ed11_Polycom 17-08-2011 10:23 Page 46
  • 47. LIMITED WARRANTY. Polycom warrants to the end user (“Customer”) that the product will be free from defects in workmanship and materials, under normal use and service, for one year, or such longer period as Polycom may announce publicly from time to time for particular products, from the date of purchase from Polycom or its authori- zed reseller. Polycom’s sole obligation under this express warranty shall be, at Polycom’s option and expense, to repair the defective product or part, deliver to Customer an equivalent product or part to replace the defective item, or if neither of the two foregoing options is reasonably available, Polycom may, in its sole discretion, refund to Custo- mer the purchase price paid for the defective product. All products that are replaced will become the property of Polycom. Replacement products or parts may be new or reconditioned. Polycom warrants any replaced or repaired product or part for ninety (90) days from shipment, or the remainder of the initial warranty period, whichever is lon- ger. Products returned to Polycom must be sent prepaid and packaged appropriately for safe shipment, and it is recommended that they be insured or sent by a method that provides for tracking of the package. Responsibility for loss or damage does not transfer to Polycom until the returned item is received by Polycom. The repaired or replaced item will be shipped to Customer, at Polycom's expense, not later than thirty (30) days after Polycom receives the defective product, and Polycom will retain risk of loss or damage until the item is delivered to Customer. 47 1408 8700-ed11_Polycom 17-08-2011 10:23 Page 47
  • 48. EXCLUSIONS. Polycom will not be liable under this limited warranty if its testing and examination disclose that the alleged defect or malfunction in the product does not exist or results from: • Failure to follow Polycom's installation, operation, or maintenance instructions. • Unauthorized product modification or alteration. • Unauthorized use of common carrier communication services accessed through the product. • Abuse, misuse, negligent acts or omissions of Customer and persons under Customer's control; or • Acts of third parties, acts of God, accident, fire, lighting, power surges or outages, or other hazards. WARRANTY EXCLUSIVE. IF A POLYCOM PRODUCT DOES NOT OPERATE AS WARRANTED ABOVE, CUSTOMER'S SOLE REMEDY FOR BREACH OF THAT WARRANTY SHALL BE REPAIR, REPLACEMENT, OR REFUND OF THE PURCHASE PRICE PAID, AT POLYCOM'S OPTION. TO THE FULL EXTENT ALLOWED BY LAW, THE FOREGOING WARRANTIES AND REMEDIES ARE EXCLUSIVE AND ARE IN LIEU OF ALL OTHER WARRANTIES, TERMS, OR CONDITIONS, EXPRESS OR IMPLIED, EITHER IN FACT OR BY OPERATION OF LAW, STATUTORY OR OTHERWISE, INC- LUDING WARRANTIES, TERMS, OR CONDITIONS OF MERCHANTABILITY, FITNESS FOR A PARTICULAR 48 1408 8700-ed11_Polycom 17-08-2011 10:23 Page 48
  • 49. PURPOSE, SATISFACTORY QUALITY, CORRESPONDENCE WITH DESCRIPTION, AND NON-INFRINGE- MENT, ALL OF WHICH ARE EXPRESSLY DISCLAIMED. POLYCOM NEITHER ASSUMES NOR AUTHORIZES ANY OTHER PERSON TO ASSUME FOR IT ANY OTHER LIABILITY IN CONNECTION WITH THE SALE, INSTALLATION, MAINTENANCE OR USE OF ITS PRODUCTS. SUPPORT & SERVICE AGREEMENTS. If you purchased your product from a Polycom Authorized Reseller, contact the Authorized Reseller for information about support and service agreements applicable to your product. For information on Polycom service, go to the Polycom web site www.polycom.com, products and services menu, or call 1-800-765-9266, outside the US call 1- 408-526-9000, or your local Polycom Office, as listed on the Polycom Web site. LIMITATION OF LIABILITY. TO THE FULL EXTENT ALLOWED BY LAW, POLYCOM EXCLUDES FOR ITSELF AND ITS SUPPLIERS ANY LIABILITY, WHETHER BASED IN CONTRACT OR TORT (INCLUDING NEGLIGENCE), FOR INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL, OR PUNITIVE DAMAGES OF ANY KIND, OR FOR LOSS OF REVENUE OR PROFITS, LOSS OF BUSINESS, LOSS OF INFORMATION OR DATA, OR OTHER FINANCIAL LOSS ARISING 49 1408 8700-ed11_Polycom 17-08-2011 10:23 Page 49
  • 50. OUT OF OR IN CONNECTION WITH THE SALE, INSTALLATION, MAINTENANCE, USE, PERFORMANCE, FAILURE, OR INTERRUPTION OF ITS PRODUCTS, EVEN IF POLYCOM OR ITS AUTHORIZED RESELLER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, AND LIMITS ITS LIABILITY TO REPAIR, REPLACEMENT, OR REFUND OF THE PURCHASE PRICE PAID, AT POLYCOM'S OPTION. THIS DISCLA- IMER OF LIABILITY FOR DAMAGES WILL NOT BE AFFECTED IF ANY REMEDY PROVIDED HEREIN SHALL FAIL OF ITS ESSENTIAL PURPOSE. DISCLAIMER. Some countries, states, or provinces do not allow the exclusion or limitation of implied warranties or the limitation of incidental or consequential damages for certain products supplied to consumers, or the limitation of liability for personal injury, so the above limitations and exclusions may be limited in their application to you. When the implied warranties are not allowed to be excluded in their entirety, they will be limited to the duration of the applicable written warranty. This warranty gives you specific legal rights which may vary depending on local law. GOVERNING LAW. This Limited Warranty and Limitation of Liability shall be governed by the laws of the State of California, U.S.A., and by the laws of the United States, excluding their conflicts of laws principles. The United Nations Convention on Contracts for the International Sale of Goods is hereby excluded in its entirety from appli- cation to this Limited Warranty and Limitation of Liability. 50 1408 8700-ed11_Polycom 17-08-2011 10:23 Page 50
  • 51. END-USER LICENSE AGREEMENT FOR POLYCOM SOFTWARE IMPORTANT - READ CAREFULLY BEFORE USING THE SOFTWARE PRODUCT: This End-User License Agreement ("Agreement") is a legal agreement between you (either an individual or a single entity) and Polycom, B.V for the POLYCOM® SOFTWARE PRODUCT licensed by Polycom, B.V in Europe, the Middle East, Africa, and Asia Pacific, or the POLYCOM SOFTWARE PRODUCT licensed by Polycom, Inc. in the rest of the world (collectively referred to herein as “POLYCOM”). The SOFTWARE PRODUCT includes computer software as attached hereto and may include associated media, printed materials, and "online" or electronic docu- mentation ("SOFTWARE PRODUCT"). By clicking “I agree” or by installing, copying, or otherwise using the SOFTWARE PRODUCT, you agree to be bound by the terms of this Agreement. If you do not agree to the terms of this Agreement, do not install or use the SOFTWARE PRODUCT, and return it to your place of purchase for a full refund. The SOFTWARE PRODUCT is protected by copyright laws and international copyright treaties, as well as other intellectual property laws and treaties. The SOFTWARE PRODUCT is licensed (not sold) to you, and its use is subject to the terms of this Agreement. 51 1408 8700-ed11_Polycom 17-08-2011 10:23 Page 51
  • 52. 1. GRANT OF LICENSE. Subject to the terms of this Agreement, POLYCOM grants to you a non-exclusive license to install and use the SOFTWARE PRODUCT on the POLYCOM product with which this SOFTWARE PRODUCT is supplied (the “PRODUCT”). You may use the SOFTWARE PRODUCT only in connection with the use of the PRODUCT. You are not permitted to lease, rent, distribute or sublicense the SOFTWARE PRODUCT or to use the SOFTWARE PRODUCT in a time-sharing arrangement or in any other unauthorized manner. Further, no license is granted to you in the human readable code of the SOFTWARE PRODUCT (source code). Except as provided below, this License Agreement does not grant you any rights to patents, copyrights, trade secrets, trademarks, or any other rights in respect to the SOFTWARE PRODUCT. 2. DESCRIPTION OF OTHER RIGHTS AND LIMITATIONS. 2.1 Limitations on Reverse Engineering, Decompilation, and Disassembly. You may not reverse engineer, decompile, or disassemble the SOFTWARE PRODUCT, except and only to the extent that such activity is expressly permitted by applicable law notwithstanding this limitation. The SOFTWARE PRODUCT is licensed as a single product. Its component parts may not be separated for use on more than one PRODUCT. 52 1408 8700-ed11_Polycom 17-08-2011 10:23 Page 52
  • 53. 2.2 Back-up. Except as expressly provided for under this Agreement you may not copy the SOFTWARE PRO- DUCT; except, however, you may keep one copy of the SOFTWARE PRODUCT and, if applicable, one copy of any previous version, for back-up purposes, only to be used in the event of failure of the original. All copies of the SOFTWARE PRODUCT must be marked with the proprietary notices provided on the original SOFTWARE PRO- DUCT. You may not reproduce the supporting documentation accompanying the SOFTWARE PRODUCT. 2.3 Modifications. You may not modify, translate or create derivative works of the SOFTWARE PRODUCT. 2.4 Proprietary Notices. You may not remove or obscure any proprietary notices on or in the SOFTWARE PRO- DUCT or the supporting documentation. 2.5 Software Transfer. You may permanently transfer all of your rights under this Agreement, provided you retain no copies, you transfer all of the SOFTWARE PRODUCT (including all component parts, the media and printed materials, any upgrades, this Agreement, and, if applicable, the Certificate of Authenticity), and the recipient agre- es to the terms of this Agreement. If the SOFTWARE PRODUCT is an upgrade, any transfer must include all prior versions of the SOFTWARE PRODUCT. However, if the SOFTWARE PRODUCT is marked “Not for Resale” or “NFR”, you may not resell it or otherwise transfer it for value. 53 1408 8700-ed11_Polycom 17-08-2011 10:23 Page 53
  • 54. 2.6 Copyright. All title and copyrights in and to the SOFTWARE PRODUCT (including but not limited to any images, photographs, animations, video, audio, music, text, and "applets" incorporated into the SOFTWARE PRODUCT), the accompanying printed materials, and any copies of the SOFTWARE PRODUCT are owned by POLYCOM or its sup- pliers. The SOFTWARE PRODUCT is protected by copyright laws and international treaty provisions. Title, owner- ship rights, and intellectual property rights in the SOFTWARE PRODUCT shall remain in POLYCOM or its suppliers. Title and related rights in the content accessed through the SOFTWARE PRODUCT is the property of such content owner and may be protected by applicable law. This Agreement gives you no rights in such content. 2.7 Confidentiality. The SOFTWARE PRODUCT contains valuable proprietary information and trade secrets of POLYCOM and its suppliers and you shall protect the confidentiality of, and avoid disclosure and unauthorized use of, the SOFTWARE PRODUCT. 2.8 Dual-Media Software. You may receive the SOFTWARE PRODUCT in more than one medium. Regardless of the type or size of medium you receive, you may use only one medium that is appropriate for your single PRO- DUCT. You may not use or install the other medium on another PRODUCT. 2.9 Reservation. POLYCOM reserves all rights in the SOFTWARE PRODUCT not expressly granted to you in this Agreement. 54 1408 8700-ed11_Polycom 17-08-2011 10:23 Page 54
  • 55. 3. SUPPORT SERVICES. POLYCOM may provide you with support services related to the SOFTWARE PRODUCT("SUPPORT SERVICES "). Use of SUPPORT SERVICES is governed by the POLYCOM policies and programs described in the POLYCOM - provided materials. Any supplemental software code provided to you as part of the SUPPORT SERVICES is consi- dered part of the SOFTWARE PRODUCT and is subject to the terms and conditions of this Agreement. With respect to technical information you provide to POLYCOM as part of the SUPPORT SERVICES, POLYCOM may use such information for its business purposes, including for product support and development. POLYCOM will not utilize such technical information in a form that personally identifies you. 4. TERMINATION. Without prejudice to any other rights, POLYCOM may terminate this Agreement if you fail to comply with any of the terms and conditions of this Agreement. In such event, you must destroy all copies of the SOFTWARE PRO- DUCT and all of its component parts. You may terminate this Agreement at any time by destroying the SOFTWA- RE PRODUCT and all of its component parts. 55 1408 8700-ed11_Polycom 17-08-2011 10:23 Page 55
  • 56. 5. UPGRADES. If the SOFTWARE PRODUCT is labeled as an upgrade, you must be properly licensed to use the software identified by POLYCOM as being eligible for the upgrade in order to use the SOFTWARE PRODUCT. A SOFTWARE PRO- DUCT labeled as an upgrade replaces and/or supplements the software that formed the basis for your eligibility for the upgrade. You may use the resulting upgraded SOFTWARE PRODUCT only in accordance with the terms of this Agreement. If the SOFTWARE PRODUCT is an upgrade of a component of a package of software programs that you licensed as a single product, the SOFTWARE PRODUCT may be used and transferred only as part of that single SOFTWARE PRODUCT package and may not be separated for use on more than one PRODUCT. 6. WARRANTY AND WARRANTY EXCLUSIONS. 6.1 Limited Warranty. POLYCOM warrants that (a) the SOFTWARE PRODUCT will perform substantially in accordance with the accompanying documentation for a period of ninety (90) days from the date of receipt by you, and (b) any SUPPORT SERVICES provided by POLYCOM shall be substantially as described in applicable written materials provided to you by POLYCOM, and POLYCOM support engineers will make commercially reasonable efforts to solve any problem issues. POLYCOM does not warrant that your use of the SOFTWARE PRODUCT will be uninterrupted or error free, or that all defects in the SOFTWARE PRODUCT will be corrected. POLYCOM's sole 56 1408 8700-ed11_Polycom 17-08-2011 10:23 Page 56
  • 57. obligation under this express warranty shall be, at POLYCOM's option and expense, to refund the purchase price paid by you for any defective software product which is returned to POLYCOM with a copy or your receipt, or to replace any defective media with software which substantially conforms to applicable POLYCOM published speci- fications. Any replacement SOFTWARE PRODUCT will be warranted for the remainder of the original warranty period or thirty (30) days, whichever is longer. 6.2 Warranties Exclusive. IF THIS SOFTWARE PRODUCT DOES NOT OPERATE AS WARRANTED ABOVE, YOUR SOLE REMEDY FOR BREACH OF THAT WARRANTY SHALL BE REPAIR, REPLACEMENT, OR REFUND OF THE PURCHASE PRICE PAID, AT POLYCOM'S OPTION. TO THE FULL EXTENT ALLOWED BY LAW, THE FOREGOING WARRANTIES AND REMEDIES ARE EXCLUSIVE AND ARE IN LIEU OF ALL OTHER WARRANTIES, TERMS, OR CONDITIONS, EXPRESS OR IMPLIED, EITHER IN FACT OR BY OPERATION OF LAW, STATUTORY OR OTHERWISE, INCLUDING WARRANTIES, TERMS, OR CONDITIONS OF MERCHAN- TABILITY, FITNESS FOR A PARTICULAR PURPOSE, SATISFACTORY QUALITY, CORRESPONDENCE WITH DESCRIPTION, AND NON-INFRINGEMENT, ALL OF WHICH ARE EXPRESSLY DISCLAIMED. POLYCOM NEITHER ASSUMES NOR AUTHORIZES ANY OTHER PERSON TO ASSUME FOR IT ANY OTHER LIABILITY 57 1408 8700-ed11_Polycom 17-08-2011 10:23 Page 57
  • 58. IN CONNECTION WITH THE SALE, INSTALLATION, MAINTENANCE OR USE OF THIS SOFTWARE PRO- DUCT. POLYCOM SHALL NOT BE LIABLE UNDER THIS WARRANTY IF ITS TESTING AND EXAMINATION DISCLOSE THAT THE ALLEGED DEFECT OR MALFUNCTION IN THE SOFTWARE PRODUCT DOES NOT EXIST OR WAS CAUSED BY YOUR OR ANY THIRD PERSON'S MISUSE, NEGLECT, IMPROPER INSTALLA- TION OR TESTING, UNAUTHORIZED ATTEMPTS TO MODIFY THE PRODUCT, OR ANY OTHER CAUSE BEYOND THE RANGE OF THE INTENDED USE, OR BY ACCIDENT, FIRE, LIGHTNING, POWER CUTS OR OUTAGES, OTHER HAZARDS, OR ACTS OF GOD. 7. LIMITATION OF LIABILITY. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL POLYCOM OR ITS SUPPLIERS BE LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT, OR CONSEQUENTIAL DAMAGES WHATSOEVER (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSI- NESS INTERRUPTION, LOSS OF BUSINESS INFORMATION, OR ANY OTHER PECUNIARY LOSS) ARISING OUT OF THE USE OF OR INABILITY TO USE THE SOFTWARE PRODUCT OR THE PROVISION OF OR FAILURE TO PROVIDE SUPPORT SERVICES, EVEN IF POLYCOM HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH 58 1408 8700-ed11_Polycom 17-08-2011 10:23 Page 58
  • 59. DAMAGES. IN ANY CASE, POLYCOM'S ENTIRE LIABILITY SHALL BE LIMITED TO THE GREATER OF THE AMOUNT ACTUALLY PAID BY YOU FOR THE SOFTWARE PRODUCT OR U.S. $5.00. PROVIDED, HOWEVER, IF YOU HAVE ENTERED INTO A POLYCOM SUPPORT SERVICES AGREEMENT, POLYCOM'S ENTIRE LIABILI- TY REGARDING SUPPORT SERVICES SHALL BE GOVERNED BY THE TERMS OF THAT AGREEMENT. 8. DISCLAIMER. Some countries, states, or provinces do not allow the exclusion or limitation of implied warranties or the limitation of incidental or consequential damages for certain products supplied to consumers, or the limitation of liability for personal injury, so the above limitations and exclusions may be limited in their application to you. When the implied warranties are not allowed to be excluded in their entirety, they will be limited to the duration of the applicable written warranty. This warranty gives you specific legal rights which may vary depending on local law. 9. EXPORT CONTROLS. The SOFTWARE PRODUCT may not be downloaded or otherwise exported or re-exported (i) into (or to a national or resident of) Cuba, Iraq, Libya, North Korea, Yugoslavia, Iran, Syria, Republic of Serbia, or any other country to 59 1408 8700-ed11_Polycom 17-08-2011 10:23 Page 59
  • 60. which the U.S. has embargoed goods; or (ii) to anyone on the U.S. Treasury Department’s list of Specially Designa- ted Nationals or the U.S. Commerce Department's Table of Denial Orders. By downloading or using the SOFTWA- RE PRODUCT, you are agreeing to the foregoing and you are representing and warranting that you are not located in, under the control of, or a national or resident of any such country or on any such list. If you obtained this SOFTWARE PRODUCT outside of the United States, you are also agreeing that you will not export or re-export it in violation of the laws of the country in which it was obtained. 10. MISCELLANEOUS. 10.1 Governing Law. This Agreement shall be governed by the laws of the State of California as such laws are applied to agreements entered into and to be performed entirely within California between California residents, and by the laws of the United States. The United Nations Convention on Contracts for the International Sale of Goods (1980) is hereby excluded in its entirety from application to this Agreement. 10.2 General. This Agreement represents the complete agreement concerning this license and may be amended only by a writing executed by both parties. If any provision of this Agreement is held to be unenforceable, such provision shall be reformed only to the extent necessary to make it enforceable. 60 1408 8700-ed11_Polycom 17-08-2011 10:23 Page 60
  • 61. 10.3 Contact. If you have any questions concerning this Agreement, or if you desire to contact POLYCOM for any reason, please contact the POLYCOM office serving your country. 10.4 U.S. Government Restricted Rights. The SOFTWARE PRODUCT and documentation are provided with RESTRICTED RIGHTS. The SOFTWARE PRODUCT programs and documentation are deemed to be "commercial computer software" and "commercial computer software documentation", respectively, pursuant to DFAR Section 227.7202 and FAR 12.212(b), as applicable. Any use, modification, reproduction, release, performance, display or disclosure of the SOFTWARE PRODUCT programs and/or documentation by the U.S. Government or any of its agencies shall be governed solely by the terms of this Agreement and shall be prohibited except to the extent expressly permitted by the terms of this Agreement. Any technical data provided that is not covered by the above provisions is deemed to be "technical data-commercial items” pursuant to DFAR Section 227.7015(a). Any use, modification, reproduction, release, performance, display or disclosure of such technical data shall be governed by the terms of DFAR Section 227.7015(b). 61 1408 8700-ed11_Polycom 17-08-2011 10:23 Page 61
  • 62. 62 12.4. Technical information Approvals Acoustics: TBR10 Electrical: TBR6 (DECT RF) Access profile: TBR 22 (GAP) EMC: EN 301 489 -1/-6 EN 301 406 EN 60950-1 EN 50371 EN 61000-3-2 EN 61000-3-3 Size and weight Size: 149 x 50 x 28 mm Weight: 123 g including battery ± 10 g Capacity Active talking time 12 hours Stand-by time 150 hours Power output Maximum average output power emitted in average of six minutes: <20.0 mW. 1408 8700-ed11_Polycom 17-08-2011 10:23 Page 62
  • 63. 63 This KIRK product has been marked with the CE mark. This mark indicates compliance with EEC Directives 89/336/EEC, 73/23/EEC 1999/5/EC. A full copy of the Declaration of Con- formity can be obtained from Polycom Ltd, 270 Bath Road, Slough, Berkshire, SL1 4DX, UK. 12.5 International Regulatory and Product Information Česky [Czech]: Polycom (UK) Ltd tímto prohlašuje, že tento KIRK 4020 / 4040 handset je ve shodě se základními požada- vky a dalšími příslušnými ustanoveními směrnice 1999/5/ES. Dansk [Danish]: Undertegnede Polycom (UK) Ltd erklærer herved, at følgende udstyr KIRK 4020 / 4040 handset overhol- der de væsentlige krav og øvrige relevante krav i direktiv 1999/5/EF. Deutsch [German]: Hiermit erklärt Polycom (UK) Ltd, dass sich das Gerät KIRK 4020 / 4040 handset in Übereinstimmung mit den grundlegenden Anforderungen und den übrigen einschlägigen Bestimmungen der Richtlinie 1999/5/EG befindet. 1408 8700-ed11_Polycom 17-08-2011 10:23 Page 63
  • 64. 64 Eesti [Estonian]: Käesolevaga kinnitab Polycom (UK) Ltd seadme KIRK 4020 / 4040 handset vastavust direktiivi 1999/5/EÜ põhinõuetele ja nimetatud direktiivist tulenevatele teistele asjakohastele sätetele. English: Hereby, Polycom (UK) Ltd. declares that this KIRK 4020 / 4040 handset is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Español [Spanish]: Por medio de la presente Polycom (UK) Ltd declara que el KIRK 4020 / 4040 handset cumple con los requ- isitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE. Ελληνική [Greek]: ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ Polycom (UK) Ltd ΔΗΛΩΝΕΙ ΟΤΙ KIRK 4020 / 4040 handset ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ ΟΥΣΙΩΔΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ΔΙΑΤΑΞΕΙΣ ΤΗΣ ΟΔΗΓΙΑΣ 1999/5/ΕΚ. Français [French]: Par la présente Polycom (UK) Ltd déclare que l'appareil KIRK 4020 / 4040 handset est conforme aux exi- gences essentielles et aux autres dispositions pertinentes de la directive 1999/5/CE. Italiano [Italian]: Con la presente Polycom (UK) Ltd dichiara che questo KIRK 4020 / 4040 handset è conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE. Íslenska (Icelandic): Hér með lýsir Polycom (UK) Ltd yfir því að KIRK 4020 / 4040 handset er í samræmi við grunnkröfur og aðrar kröfur, sem gerðar eru í tilskipun 1999/5/EC Latviski [Latvian]: Ar šo Polycom (UK) Ltd deklarē, ka KIRK 4020 / 4040 handset atbilst Direktīvas 1999/5/EK būtiskajām prasībām un citiem ar to saistītajiem noteikumiem. 1408 8700-ed11_Polycom 17-08-2011 10:23 Page 64
  • 65. 65 Lietuvių [Lithuanian]: Šiuo Polycom (UK) Ltd deklaruoja, kad šis KIRK 4020 / 4040 handset atitinka esminius reikalavimus ir kitas 1999/5/EB Direktyvos nuostatas. Nederlands [Dutch]: Hierbij verklaart Polycom (UK) Ltd dat het toestel KIRK 4020 / 4040 handset in overeenstemming is met de essentiële eisen en de andere relevante bepalingen van richtlijn 1999/5/EG. Malti [Maltese]: Hawnhekk, Polycom (UK) Ltd, jiddikjara li dan [il-mudel tal-prodott] jikkonforma mal-ħtiġijiet essenzja- li u ma provvedimenti oħrajn relevanti li hemm fid-Dirrettiva 1999/5/EC. Magyar [Hungarian]: Alulírott, Polycom (UK) Ltd nyilatkozom, hogy a KIRK 4020 / 4040 handset megfelel a vonatkozó alapvetõ követelményeknek és az 1999/5/EC irányelv egyéb elõírásainak. Norsk [Norwegian]: Polycom (UK) Ltd erklærer herved at utstyret KIRK 4020 / 4040 handset er i samsvar med de grunnleg- gende krav og øvrige relevante krav i direktiv 1999/5/EF. Polski [Polish]: Niniejszym Polycom (UK) Ltd oświadcza, że KIRK 4020 / 4040 handset jest zgodne z zasadniczymi wymaganiami oraz innymi stosownymi postanowieniami Dyrektywy 1999/5/WE. Português [Portuguese]: Polycom (UK) Ltd declara que este KIRK 4020 / 4040 handset está conforme com os requisitos essenciais e outras disposições da Directiva 1999/5/CE. Slovensko [Slovenian]: Polycom (UK) Ltd izjavlja, da je ta KIRK 4020 / 4040 handset v skladu z bistvenimi zahtevami in ostalimi relevantnimi določili direktive 1999/5/ES. 1408 8700-ed11_Polycom 17-08-2011 10:23 Page 65
  • 66. 66 Slovensky [Slovak]: Polycom (UK) Ltd týmto vyhlasuje, že KIRK 4020 / 4040 handset spĺňa základné požiadavky a všetky príslušné ustanovenia Smernice 1999/5/ES. Suomi [Finnish]: Polycom (UK) Ltd vakuuttaa täten että KIRK 4020 / 4040 handset tyyppinen laite on direktiivin 1999/5/EY oleellisten vaatimusten ja sitä koskevien direktiivin muiden ehtojen mukainen. Svenska [Swedish]: Härmed intygar Polycom (UK) Ltd att denna KIRK 4020 / 4040 handset står I överensstämmelse med de väsentliga egenskapskrav och övriga relevanta bestämmelser som framgår av direktiv 1999/5/EG. The WEEE Marking on this equipment indicates that the product must not be disposed of with unsorted waste, but must be collected separately. 1408 8700-ed11_Polycom 17-08-2011 10:23 Page 66
  • 67. 67 12.5.1 Important Safety Instructions Before using your telephone equipment, you should always follow basic safety instruction to reduce the risk of fire, elec-trical shock and injury to persons, and damage to property. 1. Read and understand all instructions. 2. Follow all warnings and instructions including those marked on the prod-uct. 3. Unplug this product before cleaning. Do not use liquid cleaners or aerosol cleaners. Use damp cloth for cleaning. 4. Do not install the telephone equipment in the bathroom or near a wash bowl, kitchen sink, or laundry tub, in a wet base- ment, or near a swimming pool. 5. Slots or openings in the equipment are provided for ventilation to protect it from over-heating. These openings must not be blocked or covered. 6. The product should be operated only from the type of power source indi-cated on the instructions. If you are not sure of the type of power supply, consult your dealer or local power company. 7. Do not overload wall outlets and extension cords as this can result in fire or electrical shock. 8. Never push objects of any kind into this product through cabinet slots as they may touch dangerous voltage points or short out parts that could result in fire, electrical shock, or injury. Never spill liquid of any kind into this product. 9. To reduce the risk of electrical shock or burns, do not disassemble this product. Opening or removing covers may expose you to dangerous volt-ages, dangerous electrical current, or other risks. Incorrect reassemble can cause electrical shock when the appli-ance is subsequently used. If the product need repair, consult your dealer. 10. Refer servicing to qualified service personnel. 1408 8700-ed11_Polycom 17-08-2011 10:23 Page 67
  • 68. 68 11. Avoid using telephone during an electrical storm. There may be a risk of electrical shock from lightning. 12. Do not use the telephone to report a gas leak in the vicinity of the leak. 13. Do not place the base or charger near microwave ovens, radio equipment, or non-ground connected televisions. These appliances may cause electrical interference to the base or handset. 14. The charger must be placed on a hard, flat surface and connected to a functional power source. 15. This telephone will not operate in the event of a blackout. Please keep a backup phone for emergencies. 16. Installation must be performed in accordance with all relevant national wiring rules. 17. Plug acts as Disconnect Device - The socket outlet to which this apparatus is connected must be installed near the equip- ment and must always be read-ily accessible. Intrinsic safety Do not use the handset in conditions where there is a danger of electrically ignited explosions. Exposure to sunlight, heat and moisture. Do not expose the wireless phone to direct sunlight for long periods. Keep the wire-less phone away from excessive heat and moisture. Spare parts and accessories Use only approved spare parts and accessories. The operation of non- approved parts cannot be guaranteed and may even cau- se damage. Power failure In the event of a power failure or flat bat-tery, you cannot use the handset to make or receive calls. 1408 8700-ed11_Polycom 17-08-2011 10:23 Page 68
  • 69. 69 Battery Precautions 1. Periodically clean the charge contacts on both the charger and handset. 2. Exercise care in handling batteries in order not to short the batteries with conducting materials such as rings, bracelets, and keys. The batteries or conducting material may overheat and cause burns or fire. 3. Do not open or mutilate the batteries. Released electrolyte is corrosive and may cause damage to the eyes or skin. The elec- trolyte may be toxic if swal-lowed. 4. During charging batteries heat up. This is normal and not dangerous. 5. Lithium cell installation Caution -Danger of Explosion if Battery is incorrectly replaced. Replace only with the same or equ- ivalent type rec-ommended by the manufacturer. Dispose of used batteries according to the manufacturer's instructions. Note: This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to local regulations. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular instal- lation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: — Reorient or relocate the receiving antenna. — Increase the separation between the equipment and receiver. — Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. — Consult the dealer or an experienced radio/TV technician for help. 1408 8700-ed11_Polycom 17-08-2011 10:23 Page 69
  • 70. 70 FCC Note: This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. In accordance with part 15 of the FCC rules, the user is cautioned that any changes or modifica- tions not expressly approved by Polycom Inc. could void the user’s authority to operate the equipment. SAR: Device has been tested for SAR compliance for head and body worn con-figurations. The highest reported SAR values are: 4020: 0.037 W/kg head, 0.01 W/kg body and 4040: 0.037 W/kg head, 0.01 W/kg body. IC Note: Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. The Term "IC": before the certification/ registration number only signifies that the Industry Canada technical specifications were met. Privacy of communications may not be ensured when using this telephone. This Class [B] digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada. Power Outage: In the event of a power outage, your wireless telephone will not operate. The wireless telephone requires electri- city for operation. You should have a telephone which does not require electricity available for use during power outages. Information to user: The users manual or instruction manual for an intentional or unintentional radiator shall caution the user that changes or modifications not expressly approved by the party responsi-ble for compliance could void the user's authority to operate the equipment. 1408 8700-ed11_Polycom 17-08-2011 10:23 Page 70
  • 71. 71 NOTE EMC: Cet appareil a été soumis à un essai et jugé conforme aux normes régissant les limites établies pour un dis-positif numérique de classe B, conformé-ment aux règlements locaux.Ces limites visent à assurer une protection raisonna-ble contre des interférences pouvant nuire a l'appareil utilisé dans un secteur rési-dentiel. Cet équipment génère et utilise des radiofréqu- ences, et peut en émettre. S'il n'est pas installé et utilisé selon les directives fournies, il risque de perturber les radiocommunica- tions. L'exploitation de cet appareil dans un secteur particulier est toutefois susceptible de produire des interférences nuisibles. Si cet équipement provoque des interférences lors de la réception des radiofréquences ou des fréquences de télévision, ce qui peut être vérifié en mettant l'appareil hors tension, puis en le remettant sous tension, l'utilisa-teur doit prendre l'une des mesu- res suiv-antes pour corriger la situation: — réorienter ou relocaliser l'antenne de réception; — augmenter la distance entre l'appareil et 1 antenne de réception; — brancher l'appareil à une prise d'un circuit différent de celui auquel l'antenne est branchée; — consulter le détaillant ou un technicien en radiotélévision d'expérience pour obtenir de l'aide. 1408 8700-ed11_Polycom 17-08-2011 10:23 Page 71
  • 72. 72 12.5.2 Limited Warranty This limited, non-transferable warranty is provided to the original purchaser. The product is warranted to be free from defects in materials and workmanship under normal installation, use and service for a period of one (1) year from the date of purchase as shown on the purchaser's receipt. Our obligation under this warranty is limited to repair or replacement (at our option) of the product or any part(s) which are defective provided that the product is returned to the original place of purchase or an authorized service location during the warranty period. Products returned must be accompanied by a copy of the purchase receipt. In the absence of a purchase receipt, the warranty period shall be one (1) year from the date of manufacture. Repair or replacement of the product is your sole and exclusive remedy. If the product is repaired, reconditioned component parts or materials may be used. If the product is replaced, we may replace it with a new or reconditioned product of the same or similar design. The repaired product will be warranted for either (a) 90 days or (b) the remainder of the original one (1) year warranty period, whichever is longer. This warranty does not apply to the defects outside of our control, including but not limited to acts of God, fire, flood and damage while in transit to service facility. We do not warranty that the product will be compatible with any telephone equip- ment, systems or party lines. This warranty shall be void if the product is damaged as a result of defacement, misuse, abuse, neglect, accident, destruction or alteration of the serial number, improper electrical voltages or currents, repair, alteration or maintenance by any person or party other than our authorized service facility, or any violation of instructions furnished by us. This warranty is also void if this product is removed from the country in which it was purchased by the original purchaser, if it 1408 8700-ed11_Polycom 17-08-2011 10:23 Page 72
  • 73. 73 is used in a country in which it is not registered for use, or if it is used in a country for which it was not designed. Due to varia- tions in telephone systems and communications laws, this product may be illegal for use in some countries. We assume no responsibilities for damages or penalties incurred resulting from the use of this product in a manner or location other than that for which it was intended. THIS LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES EXPRESS OR IMPLIED. ANY IMPLIED WARRAN- TIES INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED TO THE DURATION OF THIS WRITTEN LIMITED WARRANTY. WE DISC- LAIM ANY LIABILITY FOR DAMAGES FOR LOSS OF USE OF THE PRODUCTS, LOSS OF TIME, INCONVENIENCE, INJU- RY TO ANY PERSON, OR DAMAGE TO PROPERTY CAUSED BY THE PRODUCT, LOSS OF REVENUE OR PROFIT OR DAMAGES FOR ANY FAILURE TO PERFORM. IN NO EVENT SHALL WE BE LIABLE FOR ANY SPECIAL, INCIDENTAL, PUNITIVE OR CONSEQUENTIAL DAMAGES EVEN IF WE ARE ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Some states do not allow limitations on how long an implied warranty lasts, so the above limitations may not apply to you. This warranty is the sole and exclusive warranty provided for the product. There are no other express warranties. This warran- ty gives you specific legal rights, and you may also have other rights, which vary from state to state. 1408 8700-ed11_Polycom 17-08-2011 10:23 Page 73
  • 74. 1408 8700-ed11_Polycom 17-08-2011 10:23 Page 74
  • 75. 1408 8700-ed11_Polycom 17-08-2011 10:23 Page 75
  • 76. ©2007Polycom,Inc.Allrightsreserved. Specificationssubjecttochangewithoutnotice. PolycomHeadquarters 4750WillowRoad Pleasanton CA94588(T) Polycom(Denmark) Langmarksvej34 DK-8700Horsens Tel.+4575602850 Fax+4575602851 emeadk@polycom.com www.polycom.com 14088700-HD.ED11.A.RasmussensBogtrykkeri,Ringkøbing 1408 8700-ed11_Polycom 17-08-2011 10:23 Page 76

Related Documents