The uses of poly(tetrafluoroethene) (PTFE) are a function of its resistance to
chemical attack, unreactivity (even above 5...
Figure 1 The retractable roof of the Centre Court at Wimbledon is made of poly(tetrafluoroethene). In this
photo, the roof...
The cooling is done by passing the vapour through a water-cooled heat exchanger, made of graphite to
resist chemical attac...
By kind permission of AGC Chemicals Europe.
The co-polymer produced from ethene and tetrafluroethene is an alternating co-...
of 4

Poly(tetrafluoroethene) (polytetrafluoroethylene)

Polymer Chemistry
Published on: Mar 4, 2016
Published in: Education      
Source: www.slideshare.net


Transcripts - Poly(tetrafluoroethene) (polytetrafluoroethylene)

  • 1. The uses of poly(tetrafluoroethene) (PTFE) are a function of its resistance to chemical attack, unreactivity (even above 500 K), low friction, non-stick properties and high electrical resistance. Polymers Poly(tetrafluoroethene) (Polytetrafluoroethylene) Poly(tetrafluoroethene) (Polytetrafluoroethylene) Uses of poly(tetrafluoroethene) (polytetrafluoroethylene) In many applications, tetrafluoroethene (TFE) is co-polymerized with other fluorinated monomers, such as hexafluoropropene and perfluoropropyl vinyl ether, and also with ethene. Poly(tetrafluoroethene) (PTFE) and its co-polymers are used in: cable insulation reactor and plant equipment linings, when reactants or products are highly corrosive to ordinary materials such as steel semi-permeable membranes in chlor-alkali cells and fuel cells bearings and components in mechanical devices such as small electrical motors and pumps permeable membrane (e.g. Gore-TexTM), for clothing and shoes, which allows water vapour to diffuse away from the skin but prevents liquid water (rain) from soaking in non-stick domestic utensils, e.g. frying pans medical - catheter tubing hose and tubing solid lubricants combinations with magnesium and aluminium as an igniter for explosives CONTENTS Home Introduction Industrial processes Materials and applications Basic chemicals Polymers Polymers: an overview Degradable plastics Methanal plastics (Formaldehyde plastics) Polyamides Polycarbonates Poly(chloroethene) (Polyvinyl chloride) Polyesters Poly(ethene) (Polyethylene) Poly(methyl 2- methylpropenoate) (Polymethyl methacrylate) Poly(phenylethene) (Polystyrene) Poly(propene) (Polypropylene) Poly(propenoic acid) (Polyacrylic acid) Poly(propenonitrile) (Polyacrylonitrile) Poly(tetrafluoroethene) (Polytetrafluoroethylene) Polyurethanes Silicones Metals search...
  • 2. Figure 1 The retractable roof of the Centre Court at Wimbledon is made of poly(tetrafluoroethene). In this photo, the roof is being closed. By kind permission of AGC Chemicals Europe Ltd. Annual production of poly(tetrafluoroethene) (polytetrafluoroethylene) World 200 000 tonnes Europe 15 000 tonnes Manufacture of poly(tetrafluoroethene) (polytetrafluoroethylene) PTFE is made from methane in a series of reactions: a) production of trichloromethane (chloroform) b) production of chlorodifluoromethane c) production of tetrafluoroethene (TFE) d) polymerization of tetrafluoroethene (a) Production of trichloromethane (chloroform) Trichloromethane is one of the products formed by the reaction of methane and a mixture of chlorine and hydrogen chloride. This can be performed in the liquid phase at 370-420 K using a zinc chloride catalyst. Alternatively, the reaction is carried out in the vapour phase, using alumina gel or zinc oxide on silica as a catalyst at 620-720 K. (b) Production of chlorodifluoromethane Trichloromethane is reacted with anhydrous hydrogen fluoride in the presence of antimony(III) and antimony(V) chlorofluoride to give chlorodifluoromethane: (c) Production of tetrafluoroethene (tetrafluoroethylene, TFE)) Since TFE is an explosive gas (bp 197 K), it is usually made when and where required for polymerization so that there is minimum storage time of the monomer between its production and its polymerization. Chlorodifluoromethane is heated in the absence of air, a process known as pyrolysis: Low pressures (atmospheric) and high temperatures (940-1070 K) favour the reaction. Steam, preheated to 1220 K, and chlorodifluoromethane, at 670 K, are fed into a reactor. Steam is used to dilute the reaction mixture and hence reduce the reactant partial pressure, and thus the formation of carbon and toxic by-products. The steam also supplies all the heat required by this endothermic reaction. Very little hydrolysis of reactant and product occurs. Once formed, the product must be rapidly cooled to 770 K to prevent the reverse reaction occurring and the explosive decomposition of TFE:
  • 3. The cooling is done by passing the vapour through a water-cooled heat exchanger, made of graphite to resist chemical attack and thermal shock. Reactor residence time is 1 second. (d) Polymerization of tetrafluoroethene (tetrafluoroethylene) The monomer is transformed into the polymer, PTFE, by radical polymerization. The reaction is carried out by passing TFE into water containing a radical initiator, e.g. ammonium persulfate, (NH4)2S2O8, at 310-350 K and a pressure of 10-20 atm. Two different procedures are used: granular polymerization gives a suspension of string-like PTFE particles up to 1 cm long in water. These are milled to produce fine powders (30 pm) used for moulding. The fine powders are also agglomerated to larger particles (500 pm) to give better flow. Unlike other thermoplastics, such as PVC, PTFE cannot be processed by melt extrusion. The powder is therefore moulded into rods for extrusion and heating at temperatures above 530 K to force the particles to stick together. dispersion polymerization can be used to obtain a colloidal dispersion of PTFE particles (0.25 pm) in water. The dispersion can be concentrated and used for dip coating or spraying articles. The dispersion can also be coagulated and dried to give a powder, which, in turn, is made into a paste and extruded on to wire. Co-polymers There is a group of co-polymers which are formed by the co-polymerization of tetrafluoroethene and other unsaturated organic compounds such as ethene, hexafluoropropene and perfluoropropylvinyl ether. As described above, these co-polymers are used in many of the examples given for PTFE. Figure 2 The outer skin of the Allianz Arena in Munich is made of cushions of ETFE. There are lights inside the cushions which are changed depending on which team is playing: white when the German national team is playing, red for FC Bayern Munich and blue for TSV1860 Munich.
  • 4. By kind permission of AGC Chemicals Europe. The co-polymer produced from ethene and tetrafluroethene is an alternating co-polymer usually known by its trivial name, ethylene tetrafluoroethylene (ETFE): It is used, in particular as a lining for containers as it is stable to attack by concentrated solutions of acids and alkalis, and because of its good electrical properties of insulation and its strength, it is used as a coating for wires and cables. Its most spectacular use is as a roofing material in buildings such as the O Arena in London, the Eden Project in Cornwall and the Birds Nest Olympic Stadium in Beijing. The roofs are made up of 2 - 5 layers of large cushions of ETFE. It is also used as an outer skin of large buildings (Figure 2). Date last amended: 7th October 2013 Copyright © 2014 CIEC Promoting Science at the University of York, York, UK. All Rights Reserved. Joomla! is Free Software released under the GNU/GPL License.