Protect Your Loved Ones
2014.02
Product Features
is a series of new nano-ceramic coating products made by special
synthetic nano-ceramic material and rare...
NANO PAINT
Sample 1:high strength cement sample, treated by waterproof process
with our product.
[no descent of water, no ...
NANO PAINT
Picture 1; High strength cement sample (part A: coating treated; part B: without treatment)
Picture 2:The A,B p...
NANO PAINT
通透性 TEST
Picture 1 : High strength cement sample with coating treated.
Picture 2 : Water spray treatment---no p...
NANO PAINT
Sample 1:Concrete structure surface turned black because of
fungi reproduction.
Sample 2: After MCC coating pro...
6 Product Classifications
• Transparent wall series
• Colored wall series
• Floor cement harden series
• Colored cement fl...
Transparent wall series
Characteristics:
1.Transparent film.
2.One component coating, no need of ripening or stirring.
3.T...
Construction for transparent wall series
Construction:
1.The base surface should be cleaned up and dry thoroughly before a...
Project cases of transparent wall series
•Construction date : 2011, 07, 06.
•Construction site : edging stone of highway
C...
Project cases of transparent wall series
3. 시공 사례
Construction date: 2012, 04, 20.
Construction site: concrete wall
Treate...
Project cases of transparent wall series
Colored wall series
Characteristics:
1.Water-soluble matt paint with heat-resistant ability
below 800 ℃.
2.It can penetrat...
Project cases of colored wall series
Construction of colored wall series
Construction:
1.The base surface should be cleaned up and dry thoroughly before applic...
Floor cement harden series
Characteristics:
1. Inorganic water base products.
2. Environmentally friendly, food grade nont...
Project cases for floor cement harden series
Colored cement floor series
Characteristics:
1. This series include primer, medium and finish coatings. They are all two-c...
Project cases for colored floor cement series
Imitation stone series
Characteristics:
1.High imitation effect with the same pattern and texture with natural stone.
2.In...
Project cases of imitation stone series
Special cement series
Characteristics:
1. It is a kind of cement addition powder made of
CaSiO3 、SiO2 、Al2O3 and rare eart...
Project cases of special cement series
Thank you!
Show someone you care, (before it’s too late)
ARCH. CRISTINA ANG
63 917 792 6322
GOLDEN PLATINUM MKTG CORP.
of 24

Nano ceramic

GPMC is a company that specializes on innovative building products. For queries, you may reach Arch. Tina Ang 09177926322
Published on: Mar 3, 2016
Published in: Environment      Business      
Source: www.slideshare.net


Transcripts - Nano ceramic

  • 1. Protect Your Loved Ones 2014.02
  • 2. Product Features is a series of new nano-ceramic coating products made by special synthetic nano-ceramic material and rare earth elements. This kind of new coating products possess following features: • Room temperature curing. • Environmentally friendly,food grade non-toxic, the only zero VOC release coating product in market. • Nonflammable, A1 level fire-proof material. • Exellent hardness, durability, acid/base tolerance non-discoloring characters as other ceramic materials. • Inorganic water-based coating product which can combine with cement (other inorganic materials) to have water-proof, chemical tolerance, self-clean characters. • One-component coating, no need of ripening. • Easy cleaning, easy maintenance. Semipermanent service life. NANO PAINT
  • 3. NANO PAINT Sample 1:high strength cement sample, treated by waterproof process with our product. [no descent of water, no color change] Sample 2 : high strength cement sample, no waterproof treatment. [ The sample had absorbed water and changed color] 渗透 TEST [sample 1 : water-proof treatment] [sample 2: no treatment】 1.Waterproof test
  • 4. NANO PAINT Picture 1; High strength cement sample (part A: coating treated; part B: without treatment) Picture 2:The A,B parts were treated by 20% HNO3.After shortly slight reaction, part A turned into a stable state, while part B bubbled with intense reaction and finally be corroded. Picture 3: After test, part A were slightly discolored without further corrosion and strength lost, but part b were seriously corroded with some sand particles separated out. Before corrosion After corrosionNitric acid corrosion B A 2.Chemical corrosion test
  • 5. NANO PAINT 通透性 TEST Picture 1 : High strength cement sample with coating treated. Picture 2 : Water spray treatment---no permeation. Picture 3 : Ethanol spray treatment---permeated. Picture 4:Test result revealed that this waterproof coating product is air penetrable, which can improve the durability of the cement base. 3.Permeability test
  • 6. NANO PAINT Sample 1:Concrete structure surface turned black because of fungi reproduction. Sample 2: After MCC coating product treatment, the former black surface had turned color because of fungi reproduction repression. [sample 1] Fungi reproduction [sample 2] Fungi reproduction were repressed 4.Antimicrobial test
  • 7. 6 Product Classifications • Transparent wall series • Colored wall series • Floor cement harden series • Colored cement floor series • Imitation stone series • Special cement series
  • 8. Transparent wall series Characteristics: 1.Transparent film. 2.One component coating, no need of ripening or stirring. 3.This coating product can permeate into the concrete base to fill in the blanks. It can combined with cement to crystalline which have good tolerance ability against corrosion, freezing and avoid re-alkali so as to protect the concrete structure. 4.It is a series of waterproof products with air permeability so that it can be apply to moisture circumstances to prevent base from mildew. 5.High ageing-resistant performance. 6.Totally inorganic, non-toxic, A1 level fireproofing. Applications 1.Waterproof, antifouling, anticorrosion coating for concrete wall. 2.Tunnel, bridge protection. 3.Natural stone, clay brick protection. 4.Ditch, cement duct protection. 5.Cultural relic, historical architectural protection. 6.Cement roof. 7.Other cement surface.
  • 9. Construction for transparent wall series Construction: 1.The base surface should be cleaned up and dry thoroughly before application. 2.Big holes or cracks should be filled up before coating construction. 3.Spray, brush or roll the coating on the treated surface. 4.Surface drying only needs a few hours with some of the waterproof effect, but the perfect waterproof effect would act 3 days after construction, and a dry environment is necessary during this time. 5.Spray water on the surface after a stage of curing to check out the waterproof effect of the coating. For the less effective parts, an addition coat can be helpful. 6.All the construction concrete should be extremely curing in order to get a good waterproof effect. 7.Standard usage:it is 2.5-3.5 m2/kg depends on the surface situation. Notes: 1.No need of ripening or attenuation. 2.Moisture content of the application surface should below 8%. 3.High strength brushing is suggested for the addition coat construction for a good penetration. 4.Protective clothing is necessary because of its alkaline character. 5.Construction protection is needed to prevent spraying splash. 6.Construcion tools can be washed off by water. The residual coating product should be sealed storage with the durability of 1 year. 7.Normal cement surfaces are all applicable expect the new annexing agent additive types which need application tests before using. 8.This product can not improve the surface hardness or abradability. Relevant demands should adopt other series of our company.
  • 10. Project cases of transparent wall series •Construction date : 2011, 07, 06. •Construction site : edging stone of highway Compare between before rain and after afterbefore
  • 11. Project cases of transparent wall series 3. 시공 사례 Construction date: 2012, 04, 20. Construction site: concrete wall Treated part Un-treated part Compare between before rain and after
  • 12. Project cases of transparent wall series
  • 13. Colored wall series Characteristics: 1.Water-soluble matt paint with heat-resistant ability below 800 ℃. 2.It can penetrate into base material for a high adhesive performance. 3.It is a kind of diversity colored paints with waterproof, air permeable, anticorrosion and self-clean characteristics. 4.High ageing-resistant performance. 5.Totally inorganic, non toxic, A1 level fireproofing. Application 1.Concrete building outer wall. 2.Road, bridge. 3.Interior decoration. 4.Clay brick, inorganic insulation board. 5.Other inorganic base materials.
  • 14. Project cases of colored wall series
  • 15. Construction of colored wall series Construction: 1.The base surface should be cleaned up and dry thoroughly before application. 2.Stirring the paint well to a evenly mixture. 3.Spraying is the best method for this coating and rolling is also allowed, 4.It needs 1-2 hours for a surface dry, completely solidification needs above 8 hours when re-coat can be carried on. It takes2-4 days for totally crystallization, long-time water submersion may lead to a bad surface hardness or adhesive performance during this time, once it happened, brushing repair after water wash or hot-blast would be useful. 5.It is not allowed to re-coat the paint after completely crystallization. But if the surface was treated by heat flame above 200 ℃,re-coating can be carried on. 6.For the high water absorption base material, re-coating can be carried on after 10-30mins after first coating. 7.Standard usage:first coating: 30㎛, 0.4kg/㎡, second coating: 20㎛, 0.3kg/㎡ . For different base material the usage can be adjusted accordingly. 8.Normal products are all semigloss. High glossy demands refers to special finishing paints. Notes: 1.It is a kind of water-based paint which needs application temperature above 5 ℃,and a dry environment is necessary before curing. 2.Cement base should be completely curing with moisture content under 5%. 3.Suggest thickness of construction is between 30-80 μm, too thick coating would lead to surface crack.
  • 16. Floor cement harden series Characteristics: 1. Inorganic water base products. 2. Environmentally friendly, food grade nontoxic, the only zero VOC release coating product in market. 3. A1 level fireproofing. 4. High hardness (above 750 while the normal cement is about 250) 5. It can combine with cement to form a special molecular structure which has good waterproofing, anticorrosion, wear-resisting and anti-skidding properties. 6. Easy to be maintenance, semipermanent service time. Application 1.Factory, mill floor. 2.Logistics warehouse floor. 3.Underground parking. 4.Parking apron, square, dock. 5.Other concrete floor need impact resistance or wear resistance property.
  • 17. Project cases for floor cement harden series
  • 18. Colored cement floor series Characteristics: 1. This series include primer, medium and finish coatings. They are all two-component inorganic products. 2. No need of ripening but good mixing. 3. Chemical resistant, non-discolor, self –clean. 4. High surface hardness above 8H. 5. Skid resistant, wear-resisting (abrasion loss is only 0.19 while for epoxy it is 0.3) 6. Noiseless under vehicle wheel spreading, and it is anti-static. 7. Nontoxic, A1 level fireproofing. Application 1. High demand manufacturing floor like electronic, food factory. 2. Public place like classroom, kindergarten, supermarket. 3. Kitchen, rest room, terrace and swimming pool.
  • 19. Project cases for colored floor cement series
  • 20. Imitation stone series Characteristics: 1.High imitation effect with the same pattern and texture with natural stone. 2.Inorganic mineral substance pigment, no discolor under long time outside expose. 3.High strength ceramic topcoat with self-clean property. 4.Classified to granite, travertine, sandstone and marble. 5.Easy to be constructed.(200-300 square meters per worker) 6. Replace the natural stone with 1/500 of its weight and 20-30% of its cost. Application 1.Outer wall of High-rise building. 2.Villatic outer wall. 3.Old building modification (Construct directly on the old stone materials). 4.Corridor and elevator room. 5.Television,bar counter background wall. 6.Wall and cylinder of underground parking. 7.Plaza decoration. 8.Insulation board decoration and protection.
  • 21. Project cases of imitation stone series
  • 22. Special cement series Characteristics: 1. It is a kind of cement addition powder made of CaSiO3 、SiO2 、Al2O3 and rare earth elements. 2. High adhesion strength, good skid resistance and impact resistance properties. 3. Long time service life, the same as cement structure. 4. Easy to be construct, low cost. 5. Diversity colored, nontoxic. Application 1. Factory, logistic warehouse, parking lot, gas station. 2. Heavy industry workshop. 3. Airport, plaza, dock. 4. Military installation ground projects. •Standard usage:7—9 kg/m2 (fist layer: 6—7 kg, second layer: 1—2 kg)
  • 23. Project cases of special cement series
  • 24. Thank you! Show someone you care, (before it’s too late) ARCH. CRISTINA ANG 63 917 792 6322 GOLDEN PLATINUM MKTG CORP.

Related Documents