UserguidePoly-Lock and Poly-Pad 1
Contents:Welcome ............................................................................................................
WelcomeCongratulations on your new Poly-Pad and/or Poly-LockThis unique product gives you the opportunity to, in an instan...
Including the Poly-Pad and the Poly-LockTo include the product in your Z-wave network please follow the steps below.Poly-L...
Inclusion button6. The Vera2 gateway will tell you that it has discovered the new device, and the Poly-Lock is included....
Poly-Pad 1. Unscrew the screw in the buttom of the Poly-Pad: 2. Slide of the cover, the cover can be a bit tricky to sli...
5. Follow the mounting instructions found on the instructions video at Poly-Control.comYou are now ready to use your new P...
How to get started 1. When you successfully included you Poly-Control products 2. Log on to your MiCasaVerde UI4 3. ...
Then you will have to start making your scene.Give your scene the name “Door open”Then click the tab “Commands”A new windo...
Choose in the dropdown menu under “polylock” – “unlock”Then click the tab “Events” ...
And “Add Event” 11
Then you choose the “polypad” in the dropdown menu 12
Choose “A door is opened or closed” 13
Name the event “open” and choose “Opened” in the dropdown menuWhen this is done press the X in the top right corner of the...
Follow the steps on the next pages to finish. 15
Now make the scene for the door to close.Name the scene “door close” and choose “Lock” in the dropdown menu. ...
Under the tab “events” choose “polypad” in the dropdown menu once again. ...
Choose “A door is opened or closed” 18
Name the event “close”Choose “closed” in the dropdown menuFinish of by clicking the X in the corner of the window.Then fin...
Then choose the tab “Device Options”This is where the adjustments are made.You can write numbers in these textboxes. You a...
Reversing the lock:Type “0” in the text box, choose “1byte hex” in the dropdown and finally write 0=normaldirection (the d...
New pin codes:Awarding a new pin number:You click on the small tool in the corner of the ”poly-Pad” windowThis makes the f...
A new window:Here you can award the new pin number.Pick a name for the pin number, this could be the initials of the pin h...
If you only want the pin number to be working certain days choose: ”Weekly” ...
Then you choose which days you want the pin number to work. 25
Then choose in which time period you would like the pin number to workTo finish the restrictions press: ...
To choose a time period for the pin number to work based on dates press ”Daily” in thedropdown menu. ...
Choose the dateFinish by clicking 28
Remove Pin number:To remove a pin number press the “remove button” next to the pin number in the ”PinCode” menu:OBS: It wi...
Opening the door remotelyTo open or lock the door remotely choose the “Poly-Lock”, then choose to open ...
of 30

Poly control userguide-poly-lock_and_poly-pad_us

Published on: Mar 4, 2016
Published in: Technology      Business      Entertainment & Humor      
Source: www.slideshare.net


Transcripts - Poly control userguide-poly-lock_and_poly-pad_us

  • 1. UserguidePoly-Lock and Poly-Pad 1
  • 2. Contents:Welcome ........................................................................................................................................................ 3Including the Poly-Pad and the Poly-Lock ............................................................................................ 4 Poly-Lock ..................................................................................................................................................... 4 Poly-Pad ...................................................................................................................................................... 6How to get started ....................................................................................................................................... 81st off ................................................................................................................................................................. 8Adjusting the lock for your door ............................................................................................................. 19 Reversing the lock: ................................................................................................................................. 21 The time the lock is running for locking and unlocking ............................................................... 21New pin codes: ........................................................................................................................................... 22 Awarding a new pin number:............................................................................................................. 22 Restriction of pin numbers: .................................................................................................................. 23 Remove Pin number: ............................................................................................................................. 29Opening the door remotely .................................................................................................................... 30Sounds from the Poly-Pad:....................................................................................................................... 30 2
  • 3. WelcomeCongratulations on your new Poly-Pad and/or Poly-LockThis unique product gives you the opportunity to, in an instant; make your existing doorlock wireless.For instructions on how to mount the Poly-Lock, go to poly-control.comBelow is a brief introduction on how to operate the Poly-Lock.The Poly-Lock and Poly-Pad has been optimized to work perfectly with your Vera2gateway.OBS:It is very important that you include your Poly-Lock as the first of the Poly-Lock and thePoly-Pad.When the Poly-Lock is included you must finish the inclusion process and rename the“_Door Lock” which the Vera2 will call it to e.g. “Poly-Lock”When you have done this, you can continue and put the Vera2 in inclusion mode onesagain and include the Poly-PadIf you don’t do this, you will not know which is which. 3
  • 4. Including the Poly-Pad and the Poly-LockTo include the product in your Z-wave network please follow the steps below.Poly-Lock 1. Unscrew the screw in the buttom of the Poly-Lock: 2. Then you remove the cover, the cover will slide of easily. 3. Next you will start to include. 4. Put the Vera2 gateway in inclusion mode 5. Press the inclusion button on the Poly-Lock for 3 seconds 4
  • 5. Inclusion button6. The Vera2 gateway will tell you that it has discovered the new device, and the Poly-Lock is included.7. Finish the inclusion on the Vera2 gateway8. Mount the lock as shown in the instructions video found on Poly-Control.com 5
  • 6. Poly-Pad 1. Unscrew the screw in the buttom of the Poly-Pad: 2. Slide of the cover, the cover can be a bit tricky to slide of because the watertight gasket is very tight. 3. Put the Vera2 Gateway in inclusion mode 4. Press the inclusion button on the Poly-Pad for 3 seconds 6
  • 7. 5. Follow the mounting instructions found on the instructions video at Poly-Control.comYou are now ready to use your new Poly-Control products 7
  • 8. How to get started 1. When you successfully included you Poly-Control products 2. Log on to your MiCasaVerde UI4 3. To be able to open or lock a door with the Poly-Pad, you will have to make a scene that allows the Poly-Pad to lock and unlock the Poly-Lock 4. This means that you have to make a scene for opening the Poly-Lock and one to lock the Poly-Pad 5. A “door open” scene and a “Door Close” sceneOBS: The buttons has no function in the “Poly-Pad” windowTo remote lock and unlock the door use the buttons in the Poly-Lock window.1st offMaking a scene that allows you to lock and open the door with the Poly-Pad 1. Press the scene button 8
  • 9. Then you will have to start making your scene.Give your scene the name “Door open”Then click the tab “Commands”A new window: 9
  • 10. Choose in the dropdown menu under “polylock” – “unlock”Then click the tab “Events” 10
  • 11. And “Add Event” 11
  • 12. Then you choose the “polypad” in the dropdown menu 12
  • 13. Choose “A door is opened or closed” 13
  • 14. Name the event “open” and choose “Opened” in the dropdown menuWhen this is done press the X in the top right corner of the window.Finally to finish and save all your changes press the red “Save” Button on the home screen 14
  • 15. Follow the steps on the next pages to finish. 15
  • 16. Now make the scene for the door to close.Name the scene “door close” and choose “Lock” in the dropdown menu. 16
  • 17. Under the tab “events” choose “polypad” in the dropdown menu once again. 17
  • 18. Choose “A door is opened or closed” 18
  • 19. Name the event “close”Choose “closed” in the dropdown menuFinish of by clicking the X in the corner of the window.Then finally click the red “save” button.Now you are ready to use your Poly-Lock and your Poly-Pad.Adjusting the lock for your doorWhen the lock is installed you will probably need to adjust the lock.The two main issues to adjust is: - The time the lock is turning, to make sure that it locks the door completely. - Reverse the lock, this meaning that it is working opposite, meaning that the lock is locking when you press “unlock” on the Poly-Pad and vice versa.Time the lock is turningTo make sure the lock is locking completely you will have to adjust the time the lock isturning. To do this follow the following steps.Log in and choose the “tool” for the Poly-Lock you want to adjust. 19
  • 20. Then choose the tab “Device Options”This is where the adjustments are made.You can write numbers in these textboxes. You also have to use these dropdown menus.Finally you will have to write the “Desired Value”If you don’t have any “configuration settings” for starters, you just “add configurationsetting”, one for reversing the lock, one for the time the lock should be running when itlocks and one for the time the lock should be running when it is unlocking. 20
  • 21. Reversing the lock:Type “0” in the text box, choose “1byte hex” in the dropdown and finally write 0=normaldirection (the direction the lock is running now) or 1=reverse directionThe time the lock is running for locking and unlockingLocking:Type “1” in the text box and choose “1 byte hex” in the dropdown, and finally write thenumber of seconds the lock should be running (1-15 sec.)Unlocking:Type “2” in the text box and choose “1 byte hex” in the dropdown, and finally write thenumber of seconds the lock should be running (1-15 sec.) 21
  • 22. New pin codes:Awarding a new pin number:You click on the small tool in the corner of the ”poly-Pad” windowThis makes the following window appear:Choose the ”Pin codes” tab 22
  • 23. A new window:Here you can award the new pin number.Pick a name for the pin number, this could be the initials of the pin holder.In the next tab you write the pin number, the pin number can be between 4-8 digits, werecommend 4 digits.when you have picked the new pin number chose:This will send the pin number to the gateway, and it will work instantly, if the Vera2 gw tellsyou that the operation went fine.The pin numbers for the perticullar Poly-Pad, will show below.Restriction of pin numbers:If you want to put on restrictions for a pin number press: ”restrict code”By clicking a dropdown menu will appear: 23
  • 24. If you only want the pin number to be working certain days choose: ”Weekly” 24
  • 25. Then you choose which days you want the pin number to work. 25
  • 26. Then choose in which time period you would like the pin number to workTo finish the restrictions press: 26
  • 27. To choose a time period for the pin number to work based on dates press ”Daily” in thedropdown menu. 27
  • 28. Choose the dateFinish by clicking 28
  • 29. Remove Pin number:To remove a pin number press the “remove button” next to the pin number in the ”PinCode” menu:OBS: It will be a short while before the pin number disapears from the list. 29
  • 30. Opening the door remotelyTo open or lock the door remotely choose the “Poly-Lock”, then choose to open or lock the door.Sounds from the Poly-Pad:When a correct pin number is pressed it will be followed be 1 long beep, and afterwardsthe Poly-Lock will unlock or lock.When a wrong pin number I pressed it will be followed be 3 short beeps. 30

Related Documents