pool covers and rollers362 • Thermal	covers	for	summer	363 • Premium	thermal	covers364 • Ther...
pool covers and rollers Thermal covers for summer Bubble model 400 µm...
pool covers and rollers premIum Thermal covers ultra-Thermal model 500 µm - Blue/Gold ...
pool covers and rollers Thermal covers - foam 5 mm foam cover ...
pool covers and rollers proTecTIon covers for WInTer Gauze type - Blue model ...
pool covers and rollers proTecTIon covers for WInTer pvc Intersup opaque ...
pool covers and rollersproTecTIon covers for WInTerTechnical features TechnIcal feaTures ...
pool covers and rollers accessorIes for covers8 mm rubber tensor - 03998 accessor...
pool covers and rollersWInTer cover InsTallaTIon IMPORTANT - each cover is individually designed according...
pool covers and rollersWInTer cover InsTallaTIon WITh fIX KIT1) Drill at the 4 corners at 40 cm from the coping stone ed...
pool covers and rollers sToraGe rollers for covers central pipe in anodised aluminium Ø 100 mm ...
pool covers and rollers sToraGe rollers for covers stainless steel mobile support A set o...
pool covers and rollers sToraGe rollers for covers plastic supports for rollerSet of 2 plastic supports with hand grips f...
pool covers and rollers auTomaTIc covers The astralpool automatic coverAstralPool is continually incorporating the latest...
pool covers and rollers auTomaTIc covers advice for use and winterizingWe recommend to follow these basic indications to o...
pool covers and rollers auTomaTIc covers: The slaTs ...
pool covers and rollers auTomaTIc covers: The slaTs step slatsIn order to adapt to any swimming pool shape, 3 different g...
E B E ...
pool covers and rollers auTomaTIc covers: accessorIes cover accessoriesWe offer a list of accessories for both the use an...
pool covers and rollers auTomaTIc covers: suBmerGed models ...
pool covers and rollers auTomaTIc covers: suBmerGed models roussillon submerged modelcompleTe elecTrIcal sWITchBoard (opt...
pool covers and rollers auTomaTIc covers: suBmerGed models submerged ...
pool covers and rollers auTomaTIc covers: suBmerGed models ceret roller with solar heating feature ...
pool covers and rollers auTomaTIc covers: suBmerGed models ...
pool covers and rollers auTomaTIc covers: suBmerGed models submerged models: accessoriesThe pIT coverThe pit cover protec...
pool covers and rollers auTomaTIc covers: suBmerGed models s...
pool covers and rollers auTomaTIc covers: aBove-Ground models carlit above ground modelThe automatic cover model carlit i...
pool covers and rollers auTomaTIc covers: aBove-Ground models hand-operated carlit abov...
pool covers and rollers auTomaTIc covers: aBove-Ground models above-ground: price calculationcalculaTInG The prIcea.- ...
pool covers and rollers auTomaTIc covers: aBove-Ground models above-ground: vallespir model ...
pool covers and rollers auTomaTIc covers: aBove-Ground models WITh proTecTIve casInG above-ground models with protective ...
pool covers and rollers auTomaTIc covers: commercIal and munIcIpal models ne w ...
pool covers and rollers auTomaTIc covers: dIsplaY models carlit display model (without motor)Width: 1.5 metres with blue...
Pool covers and rollers
Pool covers and rollers
Pool covers and rollers
Pool covers and rollers
Pool covers and rollers
of 38

Pool covers and rollers

Published on: Mar 4, 2016
Published in: Sports      Business      Technology      
Source: www.slideshare.net


Transcripts - Pool covers and rollers

  • 1. pool covers and rollers362 • Thermal covers for summer 363 • Premium thermal covers364 • Thermal covers - foam365 • Protection covers for winter 368 • Accessories for covers371 • Storage rollers for covers374 • Automatic covers394 • Automatic covers: Accessories398 • Telescopic covers
  • 2. pool covers and rollers Thermal covers for summer Bubble model 400 µm - blue code standard standard standard packaging Weight kg. volume m3 pool Type Without eyelets Standard 09296 - - - Freeform 06214 - - - DeLuxe Model Standard 09295 - - - Freeform 03975 - - - Bubble model 400 µm - blue/black bubbLe code standard standard standardd packaging Weight kg. volume m3 pool Type DeLuxe Model Standard 16185 - - - Freeform 11483 - - - steps and accessories bubble models code standard standard standard packaging Weight kg. volume m3 Straight stairs fixed price 06215 - - - Roman stairs fixed price 06217 - - - Other stairs fixed price 06218 - - -bLue/bLAck bubbLe Special cut pieces for stairs 03976 - - - Additionial nickel-plated brass eyelet 04001 - - -The accessories list isfound in page 368. TechnIcal feaTures floating Isothermal “Bubble” covers composition Polyethylene based Joints ultrasonic welding borders Stitched Polyethylene strips Nb Model Only cut, without eyelets eco Model eyelets, lengthwise on both the sides DeLuxe Model Perimetral eyelets Fixing eyelets on both ends of one long side. eyelets at approx. every 65 cm on the opposite side composition Nickel plated brass eyelets Standard Supplied in cardboard box in a protection Packaging bag and with instructions leaflet 362
  • 3. pool covers and rollers premIum Thermal covers ultra-Thermal model 500 µm - Blue/Gold code standard standard standard packaging Weight kg. volume m3 pool typeDeLuxe model Standard 40837 - - - Free form 40839 - - - high resistance model 500 µm – reinforced Blue code standard standard standard packaging Weight kg. volume m3 pool typeWithout eyelets Standard 40840 - - - Free form 40842 - - -DeLuxe model Standard 40841 - - - Free form 40843 - - - steps and accessories for premium models code standard standard standard packaging Weight kg. volume m3Straight stairs fixed price 41149 - - -Roman stairs fixed price 41150 - - -Other stairs fixed price 41151 - - -Special cut pieces for stairs 41152 - - - 363
  • 4. pool covers and rollers Thermal covers - foam 5 mm foam cover code standard standard standardd packaging Weight kg. volume m3 pool Type eco Model Standard 09297 - - - Non-Standard 03983 - - - Freeform 03992 - - - DeLuxe Model Standard 09298 - - - Non-Standard 03991 - - - Freeform 03984 - - - FOAM steps and foam models code standard standard standard packaging Weight kg. volume m3 Straight stairs fixed price 06215m - - - Roman stairs fixed price 06217m - - - Other stairs fixed price 06218m - - - Special cut pieces for stairs 03993 - - - additional nickel-plated brass eyelet 04001 - - - attention: unless specified in the order, the stair cover is supplied welded to the pool cover, applying the corresponding surcharge. The cover classification into standard, non-standard and freeform covers are based on the different shapes indicated in the catalogue. The accessories list is found in page 368. - The “eco” models are provided with eyelets along side both short sides. - The “Deluxe” models are provided with perimetral eyelets. TechnIcal feaTures foam covers composition Reticulate type Polyethylene based foam Joints Thermal welding using double sided Polyethylene ribbons borders Stitched PVc strips eco Model eyelets, lengthwise on short the sides DeLuxe Model Perimetral eyelets Fixing eyelets on both ends of one short side. eyelets at approx. every 65 cm on the opposite side composition Nickel plated brass eyelets Option Lengthwise floating Polyethylene foam reinforcement Standard Supplied rolled duly Packaging protected with a cover SLeeVe. 364
  • 5. pool covers and rollers proTecTIon covers for WInTer Gauze type - Blue model code standard standard standard packaging Weight kg. volume m3 pool Typeeco Model Standard 09285 - - - Free form 03868 - - -DeLuxe Model Standard 09286 - - - Free form 03877 - - - Gauze type - Green model code standard standard standard bLue packaging Weight kg. volume m3 pool Typeeco Model Standard 09283 - - -deluxe model standard 09284 - - - steps and accessories gauze models code standard standard standard packaging Weight kg. volume m3Straight stairs-fixed price 05755 - - -Roman stairs-fixed price 05756 - - -Other stairs-fixed price 06219 - - -Special cut pieces for stairs 03869 - - - GReeNclassification: The cover classification into standard, non-standard and freeform shaped covers are based onthe different shapes indicated in the catalogue.The accessories list is found in page 368. TechnIcal feaTures Gauze models composition Wetted Poliethilene fabric 230 g/m2 Joints english seam borders Stitched PVc strips (eco Model) Perimetral eyelets and triangular reinforce ment on the corners (for Deluxe Model) eco fixing With eyelets + Double pressed rubber tensor bLue DeLuxe MODeL + S.S. anchoring fixture Distance between rubber tensors = 70 cm Distance between eyelets = approx. 20 cm DeLuxe fixing With straps + dynamometric spring + S.S. anchoring fixture Distance between straps = approx.1 m. Overlapping = 50 cm Standard Supplied in cardboard box in a protected Packaging bag and with instructions leaflet GReeN DeLuxe MODeL 365
  • 6. pool covers and rollers proTecTIon covers for WInTer pvc Intersup opaque model - blue/ivory code standard standard standardd packaging Weight kg. volume m3 pool Type eco Model Standard 09338 - - - Free form 06198 - - - DeLuxe Model Standard 09339 - - - Free form 06208 - - - pvc Intersup opaque model - green/ivorybLue ecO INTeRSuP code standard standard standardd packaging Weight kg. volume m3 pool Type eco Model Standard 09526 - - - Free form 09528 - - - DeLuxe Model Standard 09529 - - - Free form 09531 - - - steps and others for Intersup models code standard standard standard packaging Weight kg. volume m3 Straight stairs-fixed price 05755 - - - Roman stairs-fixed price 05756 - - - Other stairs-fixed price 06219 - - -bLue Luxe INTeRSuP Special cut pieces for stairs 03869 - - - Additional nickel-plated brass eyelet 04001 - - - fixpool opaque model blue/beige code standard standard standard packaging Weight kg. volume m3 blue/beige Standard 09291 - - - Non-Standard 09292 - - - Freeform 09293 - - -bLue FIxPOOL INTeRSuP classification: The cover classification into standard, non-standard and freeform covers is based on the diffe- rent shapes indicated in the catalogue. The accessories list is found in page 368. 366
  • 7. pool covers and rollersproTecTIon covers for WInTerTechnical features TechnIcal feaTures TechnIcal feaTures Intersup eco covers deluxe Intersup coverscomposition PVc fabric, reinforced double side composition PVc fabric, reinforced double side 550 g/m2 550 g/m2 Joints High frequency welding Joints High frequency welding borders Perimetral hem, joined by high borders Perimetral hem, bound together Frequency welding by high frequency welding Fixing nickel plated brass eyelets Fixing With straps + Double pressed tensor rubber + Dynamometric tensor + S.S. anchoring fixture + S.S. anchoring fixture Distance between rubber tensors = 70 cm Distance between straps = approx.1m Distance between eyelets = approx. 20 cm. Overlapping = 50 cm.Grid screen centrally located drainage grid screen Grid screen centrally located grid screen in preshrunk in pre-shrunk PVc fabric joined by PVc fabric bound together by high fre- high frecuency welding quency welding. Standard Supplied in cardboard box with Standard Supplied in cardboard box in a protec-Packaging instructions leaflet Packaging ted bag and with instructions leaflet TechnIcal feaTures fixpool covers composition PVc fabric, reinforced double side 550 g/m2 Joints High frequency welding borders Perimetral hem, joined by high frequency welding. Rigid Pe cable inside the hem Fixing by way of Fixkit + S.S. anchoring fixture Distance between them = approx. 80 cm Grid screen centrally located drainage grid screen in pre-shrunk PVc fabric stitched to the cover. Standard Supplied in cardboard box in a protected Packaging fbag and with instructions leaflet 367
  • 8. pool covers and rollers accessorIes for covers8 mm rubber tensor - 03998 accessories code standard standard standard packaging Weight kg. volume m3 S.S. Spike Per unit 03994 - - - S.S. Spike for lawn Per unit 05732 - - - Retractable cylindrical spike Per unit 40950 - - - Retractable anchoring, with spring Per unit 03995 - - -s.s. spike - 03994 Dynamometric spring Per unit 03996 - - - 1.50 m black strap for roller Per unit 25980 - - - 8 mm rubber tensor m2 03998 - - - 8 mm x 60 cm cabiclic rubber tensor Per unit 03999 - - -retractable spike - 40950 8 mm x 25 cm cabiclic rubber tensor Per unit 05736 - - - 1.20 m rubber tensor with hooks Per unit 05734 - - - Fixkit clip with rubber tensor Per unit 09439 - - -s.s. spike for lawn - 05732 concealable anchoring, with dynamometric spring- 03996 spring - 03995roller 1.50 m black strap - 60 cm cabiclic rubber tensor 25 cm cabiclic rubber tensor rubber tensor with hooks -25980 - 03999 - 05736 05734fixkit clip with rubber tensor- 09439 368
  • 9. pool covers and rollersWInTer cover InsTallaTIon IMPORTANT - each cover is individually designed according to its shape, material and fastening. - To avoid a premature cover wear and tear rubbing - Against coping material, the following precautions should be observed when installing it: - The coping material should not be more than 3 cm thick. Maxi = 3 cm - The cover warranty will not be applicable in case of faulty installation, deficient maintenance or wearing - caused by coping elements. usInG clIps or ruBBer Tensors1) Make holes in the corners at 40 cm from the coping stone edge.2) Fix the cover at the 4 corners.3) Parallel to each eyelet, drill the other holes at 40 cm from the coping stone edge.4) Tension the cover, leaving a certain allowance to the rubber tensors.n.B.: In very windy regions, we suggest installing double water drains on the side which is most exposed to the wind. 369
  • 10. pool covers and rollersWInTer cover InsTallaTIon WITh fIX KIT1) Drill at the 4 corners at 40 cm from the coping stone edge.2) Fix the cover at the 4 corners.3) Parallel to each eyelet, drill the other holes at 40 cm from the coping stone edge.4) Tense the cover, leaving a certain allowance in the elastic belt tension. WITh sTraps1) Drill at the 4 corners at 40 cm from the coping stone edge.2) Fix the cover at the 4 corners.3) Parallel to each eyelet, drill the other holes at 40 cm from the coping stone edge.4) Tense the cover, leaving a certain allowance in the rubber bands.n.B.: In very windy regions, we suggest installing double water drains on the side which is most exposed to the wind. 370
  • 11. pool covers and rollers sToraGe rollers for covers central pipe in anodised aluminium Ø 100 mm code standard standard standard packaging Weight kg. volume m3Fixed pipe, length 4.5 m 07622 1 12.0 0.059Fixed pipe, length 5.5 m 07623 1 14.3 0.071Fixed pipe, length 6.6 m 07624 1 17.4 0.084Telescopic pipe, length 4 - 5.5 m 07625 1 12.8 0.054Telescopic pipe, length 4 - 6.6 m 07626 1 15.5 0.067Other lengths, available on request fixed pipe Telescopic pipe l ØB l ØB pipe code nº straps pipe code nº straps (m) (mm) (m) (mm) 07622 4.5 100 8 07625 4.0 - 5.5 95/100 8 07623 5.5 100 8 07626 5.0 - 6.6 95/100 8 07624 6.6 100 10 stainless steel fixed end supportsSet of 2 brackets in "T" shape. Includes steering wheel operation with 8 straps for fixing the cover. code standard standard standard packaging Weight kg. volume m3A set of 2 "T" supports in AISI-304 07631 1 4.8 0.035The pipe is not included in the price a c pipe code (mm) (mm) 07631 500 514 371
  • 12. pool covers and rollers sToraGe rollers for covers stainless steel mobile support A set of 2 supports, one "T" end fixed support and the other end support with wheels. Includes 8 straps to tie the cover. code standard standard standard packaging Weight kg. volume m3 Supports in AISI-304 07628 1 7.2 0.035 The pipe is not included in the price. a c code (mm) (mm) 07628 500 650 fixed support for roller Two flange fixing supports with adjustable height from 500-800 mm in AISI-304. Fixed to the floor with flan- ges. Includes 8 straps for fixing the cover. code standard standard standard packaging Weight kg. volume m3 07629 1 7.2 0.029 The pipe is not included in the price. a B code (mm) (mm) 07629 500 to 800 100 Wall support for roller Pair of wall fixing supports. In S.S. AISI-304. Includes 8 straps for fixing the cover. code standard standard standard packaging Weight kg. volume m3 Set of 2 supports 07630 1 6.6 0.087 The pipe is not included in the price. a B c code (mm) (mm) (mm) 07630 500 100 500 372
  • 13. pool covers and rollers sToraGe rollers for covers plastic supports for rollerSet of 2 plastic supports with hand grips for easy handling. One support comes with 2 wheels and the otheris fixed. Suitable for all roller range in this catalogue. code standard standard standard packaging Weight kg. volume m3A set of 2 plastic supports 22489 1 4 0.055The pipe is not included in the price. Ø 80 mm telescopic pipe for storage roller3 piece telescopic. Ø 80 mm. Aluminium pipe can be mounted with the whole range of roller supports offeredin this catalogue. code standard standard standard packaging Weight kg. volume m3Telescopic pipe 4 - 5.5 m 24762 1 12.8 0.035Telescopic pipe 5 - 6.6 m 30806 1 15.5 0.043 roller supports (for larger pools)Suitable for fixed roller pipes 07622, 07623 and 07624 or telescopic pipes 07625 and 07626, with 1, 2 or3 rollers and steering wheels and rotating bar wheel for handling covers. contains of 2 Stainless Steel AISI-304 structures with wheels (1 set with brakes) to move the roller . Includes 8 straps per roller. code standard standard standard packaging Weight kg. volume m32 mobile supports with1 roller pipe 15836 1 36.4 0.9372 mobile supports with 2 roller pipes 15835 1 27.4 1.462 mobile supports with 3 roller pipes 15834 1 28.4 1.46mobile supports with 1 pipe.mobile supports with 2 and 3 roller pipes. 373
  • 14. pool covers and rollers auTomaTIc covers The astralpool automatic coverAstralPool is continually incorporating the latest innovations to it’s products in matters of safety. As such the automatic pool covers have beendeveloped to meet the demands of the French standard NF P90 308, which guarantees maximum user safety.The AstralPool automatic covers cover the whole pool and are easily rolled up or spread thanks to their in built motorized roller. The turning of akey is all that is needed to get it working.Manufactured with rigid slats available in various colours, their design and composition provide a floating cover which covers the whole of thewater surface and which is very effective as a thermal insulator. To meet the requierments of both existing and new-built swimming pools there areseven models available, the submerged models Roussillon, conflent and ceret, the above-ground models carlit and Vallespir, and the above-groundmodels with protective casing capcir and Narbonne.The submerged automatic cover models Roussillon, conflent and ceret allow the cover to be completely integrated into the swimming pool. Themechanical installation is located in a pit annexed to the pool, which is separated by a small concrete or PVc partition.The above-ground models (carlit and Vallespir) are the most suitable models for installing in existing pools as the roller is located on the outsideof the pool, anchored to the pool surround.The above-ground models with protective casing (capcir and Narbonne) are the basic above-ground models which can be complemented with abench that covers the mechanical installation, giving it a high-quality finish. For installation in existing swimming pools. main advantages• Increased safety in the swimming pool to protect people and pets from falling accidentally into it. The floating slats cover the entire water sur- face.*• Very convenient to use, the swimming pool is covered and uncovered in silence by simply turning a key.• Represents a considerable saving:- It acts as a thermal barrier preventing heat losses and extending the pool use season.- It is a basic complement for pool heating conditioning.- It prevents evaporation, therefore it saves water.- It reduces algae formation, which results in an important saving in chemical products.• In indoor pools no condensation is produced in the enclosed hall, thus avoiding deterioration of building materials.• Lower maintenance costs: reduction of suspended particles.• The automatic cover enables greater customisation of the swimming pool, increasing its value. astralpool service• The wide AstralPool commercial network offers immediate service.• We offer our clients pre- and post-sales technical assessment.• The manufacturing technical sheet will be used to make a cover which is perfectly adapted to your needs.• All AstralPool covers undergo strict quality control based on the most demanding regulations.• Assembly and civil engineering Manuals are available to allow building the swimming pool with the ideal requirements for subsequent installation of the submerged cover.(*) Our automatic covers comply with the requirements of the French standard NF P90-308 which demands the use of standardized safety mecha- nisms to prevent the risk of drowning by accidental falls into the pool. 374
  • 15. pool covers and rollers auTomaTIc covers advice for use and winterizingWe recommend to follow these basic indications to obtain the optimum performance from the automatic cover:• before operating the cover you must ensure that nobody is in the swimming pool and that there are no objects that could become obstacles to its normal operation.• Maintaining the correct water level is also important, as a level which is too high or too low can cause blockages at the tie beam, partition or the steps.• During the retrieving and expanding operations the cover should not be blocked, as this action could be dangerous as well as harmful to the operating mechanism.• If an automatic pool floor cleaner is used make sure that when the cover is extended neither the hose nor the power supply cable is caught up.• Regular cleaning of the cover with a pressure cleaning device or with a PVc descaling liquid is recommended. This will also prevent leaves from settling on the cover which could otherwise stain the slats..• In the case of a hail storm we recommend that you retrieve the cover.• In the Roussillon submerged model we recommend that you always keep the motor housing dry to prevent the geared motor from getting wet.for good winterization, and in order to find the pool in the best conditions in the spring, we recommend to takethe following indications:• Leave the cover extended over the water surface.• keep the water level constant. An excess should be drained through the main drain or the skimmer box.• It is advisable to clean the trapdoor and the motor housing with a high pressure cleaner before the pool is win- terized.• Place a number of anti-freeze floats in the trapdoor casing, behind the cover. The skimmers should also be pro- tected in the same way.• We recommend the installation of a plastic type cover to prevent leaves and other substances from obstructing the trapdoor, which should be cleaned regularly.• In the case of freezing, avoid forcing or pressing down hard on the slats as they could be damaged.• If the motor is in risk of flooding it is advisable to cut off the power supply and remove the motor. please fIll In The form paGes for enQuIres... 375
  • 16. pool covers and rollers auTomaTIc covers: The slaTs The slats The AstralPool automatic cover uses hollow extrusion PVc watertight slats. The end-caps welded at both ends ensure their floatability. The 20 mm wide cap flaps can assure the total length of the slats. These flaps can also be of 10 or 30 mm, thus altering the total width of the pool cover. The slats are 71.4 mm wide and 17 mm thick, guaranteeing their floatability. In order to avoid stains, specially organic ones, the slats are coated with calcium-zinc. In order to best integrate the cover into the environment, you can choose from the different slat models: White, Sand, Opaque blue, Grey, Translucent blue* and solar captor*.The slats in translucent blue and solar captor can only be used in Northern europe or in areas where there is less solar radiation. spool for an aluminium Ø 146 pool mm shaft (shaft used for pools lenght up to 6 m wide) 1m 220 mm 2m 290 mm 3m 320 mm 10 mm 4m 360 mm 5m 390 mm 6m 430 mm 7m 460 mm 20 mm 8m 470 mm 9m 490 mm 10 m 530 mm 11 m 540 mm 12 m 560 mm 30 mm convex side upwards flat side in contact with the water steps side roller shaft side WhITe sand Blue GreY Blue TranslucId* solar* maximum maximum maximum maximum maximum maximum code code code code code code width. width. width. width. width. width. 3.5 ml 34755 3.5 ml 34761 3.5 ml 34758 3.5 ml 40998 3.5 ml 34764 3.5 ml 37101 4 ml 31168 4 ml 31169 4 ml 31170 4 ml 41000 4 ml 31171 4 ml 37102 4.5 ml 34756 4.5 ml 34762 4.5 ml 34759 4.5 ml 41001 4.5 ml 34765 4.5 ml 37103 5 ml 31172 5 ml 31173 5 ml 31174 5 ml 40761 5 ml 31175 5 ml 37104 5.5 ml 34757 5.5 ml 34763 5.5 ml 34760 5.5 ml 41002 5.5 ml 34766 5.5 ml 37105 6 ml 31176 6 ml 31177 6 ml 31178 6 ml 41003 6 ml 31179 6 ml 37106 7 ml 31900 7 ml 31901 7 ml 31902 7 ml 40762 7 ml 31903 7 ml 37107 8 ml 31905 8 ml 31906 8 ml 31907 8 ml 41004 8 ml 31908 8 ml 37108 9 ml 35132 9 ml 35134 9 ml 35137 - - - - - - 10 ml 35133 10 ml 35135 10 ml 35138 - - - - - - 11 ml 33112 11 ml 35136 11 ml 33343 - - - - - -* For use only in Northern europe. Not recommended for use below 45º latitude. For bigger widths, please enquire. ml = meter length. 376
  • 17. pool covers and rollers auTomaTIc covers: The slaTs step slatsIn order to adapt to any swimming pool shape, 3 different geometric shapes are offered, thus ensuring aperfect fit to the outline of the swimming pool and maximum safety.The available shapes are Roman steps, Straight steps and Trapezoidal steps. meThod To calculaTe of sTeps slaTs roman sTeps location: It must be located on the side opposi- te to the cover motor. step price: Roman step pricelist. sTraIGhT sTeps location: a) Located in front of the cover motor. step price: Straight step price. AA A A BB location: EE b) Located netxt to the cover. B step price: E Slat pricelist per metre lenght D x (c + 1 m). CCB E • The lenght of side D includes the width of the pool A+ e (width of C steps). DD C NOTe FOR SIDe STePS: calculation of the total slat price: D Steps price + slat price (A x b) D Isosceles TrapeIZoIdal sTeps location: Located in front of the cover. step price: Trapezoidal step pricelist. AA A A BB EE B 377 E CCB E
  • 18. E B E Cpool covers and rollers C D D auTomaTIc covers: slaTs step slats recTanGular TrapeZoIdal slaTslocation:a) Located in front of the coverstep price:Trapezoidal step price. A Alocation:b) Located next to the cover B E Bstep price: ESlat price per metre lenghtD x (c + 1 m) + slat cutting surcharge Cfor custom cutting per metre lenght. C • The lenght of rollers includes the width of the pool A + the depth of the steps e. D DNOTe FOR LATeRAL STePS:calculation of total slat price: Stepprice + slat price (A x b)) description White sand opaque Blue Grey Blue traslucid* solar* square-cut roman ladder Ø3m 31182 31183 31184 41043 31185 37092 Ø4m 31186 31187 31188 41044 31189 37093 shape-cut roman ladder Ø3m 37094 37188 37190 41045 37192 37194 Ø4m 37095 37189 37191 41046 37193 37195 straight steps 2 x 1.5 m 31190 31191 31192 41047 31193 37090 2.5 x 2 m 31194 31195 31196 41048 31197 37091 square-cut Trapezoidal ladder 3 m base 31198 31199 31200 41049 31201 37096 4 m base 31202 31203 31204 41050 31205 37097 shape-cut Trapezoidal ladder 3 m base 37098 37196 37198 41051 37200 37202 4 m base 37099 37197 37199 41052 37201 37203Two finishing options: Square-cut and Shape cut*For use only in Northern europe. Not recommended for use below 45º latitude. For larger widths, please ask. ml = lineal metres code step accessories 31206 clamp to block steps 31180 Special square cnt for free form 38735 Special free form cnt 378
  • 19. pool covers and rollers auTomaTIc covers: accessorIes cover accessoriesWe offer a list of accessories for both the use and the maintenance of the automatic cover. accessories code Lift-prevention bracket, new-built pool with strap fastener. 31181 (This model is the one served under express order of another code) Lift-prevention bracket in AbS for wall fixing + belts 34754 Holding and lifting straps AbS bracket + S.S. support to install under the coping stone + belt 35131 Lift-prevention bracket bracket slat plug - overflow pool 31943 Sky for above-ground cover model 31944 AbS fixture for wall fixing AbS bracket for fixing under the coping stone. cover strap fastener bracket slat plug Above-ground cover SkyIn compliance with the French standard NF P90-308 for swimming pool covers the following straps will besupplied according to depending on the kind of cover and the swimming pool: Submerged models and above-ground models with protective casing: • cover with steps: 3 units • cover without steps: 2 units Above-ground models: • cover with steps: 5 units (2 on the motor side and 3 on the steps side) • cover without steps: 4 units (2 on the motor side and 2 on the opposite side) 379
  • 20. pool covers and rollers auTomaTIc covers: suBmerGed models roussillon submerged model The Roussillon automatic cover is the submerged model which incorporates the motor in a separate pit, and both the roller shaft as well as the cover are housed at one end inside the pool itself. The submerged pit containing the roller shaft from the main pool should be separated from the main pool by a small concrete partition at the time of construction or with a PVc partition later on. The basic elements for assembling the cover are the slats, the step slats, the mechanical kit, the embedding kit, the aluminium tie beam and the pit cover. Pit cover coping stone cover Water level Skimmer Overflow to plant room Main drain mechanIcal KIT Includes the following elements: - Ø 146 mm extruded aluminiumroller roller shaft, 5 mm thick and Ø 30 mm connecting shaft. - Motor supporting bracket. - Watertight gaskets on the wall conduit side. - Watertight gaskets on bearing support side. - 24 V geared motor with stainless steel support bracket. - 220/24V standard switchboard. - On-off key switch. Should be installed in full view of the pool. It operates with the key in the continuous contact position.Geared motor On-off key switch 220/24V operation extruded aluminium shaft24 V switchboard maximum pool reducer motor extruded shaft code dimensions nm 4x12 m 5 mm thick Aluminium shaft Ø 146 120 Nm 31144 5x12 m 5 mm thick Aluminium shaft Ø 146 120 Nm 31145 6x12 m 5 mm thick Aluminium shaft Ø 146 250 Nm 31146 7x15 m 3 mm thick Aluminium shaft Ø 168.3 250 Nm 31904 8x15 m 3 mm thick Aluminium shaft Ø 168.3 250 Nm 31909 8x16 m 3 mm thick Aluminium shaft Ø 168.3 600 Nm 31909-006 9x22 m 2 mm thick Aluminium shaft Ø 300 600 Nm 34767 10x22 m 2 mm thick Aluminium shaft Ø 300 600 Nm 34768 11x22 m 2 mm thick Aluminium shaft Ø 300 600 Nm 34769 380
  • 21. pool covers and rollers auTomaTIc covers: suBmerGed models roussillon submerged modelcompleTe elecTrIcal sWITchBoard (optional)The 220/24V (120 & 250 Nm) standard electrical switchboard is included in the mechanical kit. Alsoavailable is a complete electrical switchboard which includes two spare contactors. One is for stopping saltelectrolysis pool treatment when the cover is extended. The second contactor is meant for adapting a pressurecleaning system to the cover. electrical switchboard with options code Switchboard operation with two spare 31147 contactors note: If a salt chlorinator is used an earthing connection hould be installed.emBeddInG KITIncludes the following elements: - Wall conduit . - bearing support bracket for embeding. - embeding parts (2) for tie beam support bracket. - Watertight gaskets for wall conduits 310 mm wall conduit embedding Kit code embedding kit with 210 mm conduit 31143 embedding kit with 310 mm conduit 33074 embedding kit with 110 mm conduit (special 33075 liner and panel pools) bearing housing for embedding Tie beam stand embedding piece roussIllon model assemBlY draWInG pit motor drain roller shaft 381
  • 22. pool covers and rollers auTomaTIc covers: suBmerGed models submerged model conflent The motor is integrated into the interior of the roller shaft and can be installed in existing pools of up to 6 meters wide. As in the Roussillon model the submerged part containing the roller shaft should be separated by a small concrete partition at the time of construction or later with a PVc partition. The slat colours available for both models are white, beige and opaque blue. maxi. pool dimensions motor (nm) code conflent Pool 4 x 12 m 120 (shaft without limit switch) 33069 Pool 4 x 12 m 250 (shaft with limit switch) 33070 Pool 5 x 12 m 120 (shaft without limit switch) 33071 Pool 5 x 12 m 250 (shaft with limit switch) 33072 Pool 6 x 12 m 250 (shaft with limit switch) 33073 Pool 7 x 14 m 250 (shaft with limit switch) 33906 submerged model ceret The submerged automatic cover ceret is specially designed for new-built or existing pools of up to 6 metres in width. The motor, placed at water level, is integrated into the roller shaft. The submerged zone containing the roller shaft can be separated by a small concrete partition at the time of construction or with a PVc partition later on. The basic elements for cover assembly are the slats, the step slats, the mechanical kit, the embedding kit, the aluminium tie beam and the pit cover. It has the same technical features as the Roussillon model: easy to install in both existing and new-built pools. It blends in perfect harmony with the pool’s surroundings. It is also easy to maintain thanks to the motor loca- tion, situated at water level. The mechanics are made up of: - 150 Nm motor equipped with a limit switch system. - 2 stainless steel brackets: bearing part and motor part with only the gear transmission. - A 220 V/24 V power supply unit with a remote key switch. max. pool dimensions motor code ceret Pool 4 x 12 m shaft with limit switch 33759 Pool 5 x 12 m shaft with limit switch 33760 Pool 6 x 12 m shaft with limit switch 33761 WATeR LeVeL NeeDeD: 120 mm from the pool border. connection box Limit switch sensors partitionStainless Steel bracket 382
  • 23. pool covers and rollers auTomaTIc covers: suBmerGed models ceret roller with solar heating feature ne wIt is suitable to cover swimming pools up to 6 x 12 meters with ladder and floating slats cover. max. pool dimensions code Pool 4 x 12 m 45770 Pool 5 x 12 m 45771 Pool 6 x 12 m 45772 submerged models: price calculationcalculaTInG The prIcea.- calculate the required length of the cover adding 1 metre to the useful length of the pool. Determine the price of the slats according to the price per lineal metre corresponding to the maximum width of the pool.B.- To calculate the total price add up the following: • Price of the slats.* • Price of the step slats.* • Price of the embedding kit, (only Roussillon model). • Price of the mechanical fixture kit (bearing in mind the maximum width of the pool). • Price of the tie beam (bearing in mind the required length). • Price of pit covers (bearing in mind the material and the size of the pit). • cover strap fasteners, plus lift-prevention brackets.c.- Available options to be added to the above total cost: • complete electrical switchboard. • Te beams and slats accessories. • PVc partition.• Spare parts for the embedding kit and the tie beam.*For pools with straight or lateral trapezoidal steps see pages 377 and 378. submerged models: accessoriesThe TIe BeamIts function is to provide support to the pit cover. Manufactured in white coated aluminium, it measures 100x 110 mm and weighs 9 kg/ml.This tie beam is delivered with coated stainless steel support bracket and stainless steel nuts and boltnote: The anti-flex support bracket is essential for more than 6 m.Tie beam stand for liner horizontal profile Lacquered Aluminium tie beamTie beam stand for liner vertical profile 383
  • 24. pool covers and rollers auTomaTIc covers: suBmerGed models submerged models: accessories The TIe Beam Beam length code White beam + standard bracket The beam standard bracket uP TO 4 meters 31148 From 4 m to 5 m 31149 From 5 m to 6 m 31150 From 6 m to 7 m 31911 From 7 m to 8 m 31912 sand beam + standard bracket uP TO 4 meters 38529 From 4 m to 5 m 38530 From 5 m to 6 m 38531 The beam stand for liner hol- From 6 m to 7 m 38532 ding vertical profile From 7 m to 8 m 38533 White beam + stand for liner holding vertical profiler uP TO 4 meterss 33870 From 4 m to 5 m 33871 From 5 m to 6 m 33872 From 6 m to 7 m 33873 From 7 m to 8 m 33886 sand beam + stand for liner holding vertical profileThe beam support bracket forfastening to the pool wall uP TO 4 meterss 38534 From 4 m to 5 m 38535 From 5 m to 6 m 38536 From 6 m to 7 m 38537 From 7 m to 8 m 38538 White beam + support brcket for fastening to the pool wall uP TO 4 meters 33874The beam adjustable bracket From 4 m to 5 m 33875 From 5 m to 6 m 33876 sand beam + support brcket for fastening to the pool wall uP TO 4 meters 38534 From 4 m to 5 m 38535 From 5 m to 6 m 38536 White beam + adjustable bracket uP TO 4 meters 35717 From 4 m to 5 m 35718 From 5 m to 6 m 35719 From 6 m to 7 m 35720 From 7 m to 8 m 35721 sand beam + adjustable bracket uP TO 4 meters 38539 From 4 m to 5 m 38540 From 5 m to 6 m 38541 From 6 m to 7 m 38542 From 7 m to 8 m 38543 TIe Beam accessorIes Tie beam accessories code Anti-flex stand for 700 mm pit covers and beams of more than 6 m 31920 Anti-flex stand for 950 mm pit covers and beams of more than 6 m 31913 Anti-flex stand 384
  • 25. pool covers and rollers auTomaTIc covers: suBmerGed models submerged models: accessoriesThe pIT coverThe pit cover protects the automatic cover operating unit and conveys an aesthetic improvement to thesurroundings. It is available in IPe wood, or in white aluminium.For pools with a partition wall the cover will be 950 mm wide, while for pools with a PVc partition the 700mm lid will be used. Pit cover of IPe wood The pit cover code IPe wood 1.00 x 0.70 m 31152 IPe wood 1.00 x 0.95 m 31153 IPe wood made to measure, m2 31154 White aluminium 1.00 x 0.70 m 33679 White aluminium 1.00 x 0.95 m 33680 White aluminium made to measure, m2 33681 Sand aluminium 1.00 x 0.70 m 38512 Sand aluminium de 1.00 x 0.950 m 38513 Sand aluminiummade to measure, m2 38514 Water Pit cover of white aluminium pit cover level Tie beam partitionpvc parTITIonThe partition can be made of concrete or PVc. It is designed to improve safety by preventing bathers fromcoming into contact with the roller shaft. It also prevents the pool-floor cleaning hose from being rolled upinto the slats.The partition is made up of 300 mm high PVc panels, internally reinforced with stainless steel. It is fastenedwith two white coated stainless steel u clamps, which are fastened to the tie beam support bracket.Will be fastened to vertical wallsFor pools of more than 6 m width ask your AstralPool branch. 385
  • 26. pool covers and rollers auTomaTIc covers: suBmerGed models submerged models: accessories partitions code PVc partition + Stainless Steel 900 mm x 4 m 31158 PVc partition + Stainless Steel 900 mm x 5 m 31159 PVc partition + Stainless Steel 900 mm x 6 m 31160 PVc partition + Stainless Steel 1200 mm x 4 m 31161 PVc partition + Stainless Steel 1200 mm x 5 m 31162 Partition panel with PVc partition + Stainless Steel 1200 mm x 6 m 31163stainless steel reinforcement PVc partition + Stainless Steel 1500 mm x 4 m 33077 PVc partition + Stainless Steel 1500 mm x 5 m 33078 PVc partition + Stainless Steel 1500 mm x 6 m 33079 Partition Sand colour + Stainless Steel 900 mm x 4 m 38515 Partition Sand colour + Stainless Steel 900 mm x 5 m 38516 Partition Sand colour + Stainless Steel 900 mm x 6 m 38517 Partition Sand colour + Stainless Steel 1200 mm x 4 m 38518 Partition Sand colour + Stainless Steel 1200 mm x 5 m 38519 Partition Sand colour + Stainless Steel 1200 mm x 6 m 38520 Partition Sand colour + Stainless Steel 1500 mm x 4 m 38521 Partition Sand colour + Stainless Steel 1500 mm x 5 m 38522 Partition Sand colour + Stainless Steel 1500 mm x 6 m 38523 Stainless Steel u clamps H 900 mm on beam bracket 31164 900 mm high u clamp Stainless Steel u clamps H 900 mm for fastening on the wall 33083 Stainless Steel u clamps H 1200 mm for fastening on the wall 31165 Stainless Steel u clamps H 1500 mm for fastening on the wall 33084 S.S. u clamps colour Sand H 900 mm for fastening on the wall 38736 S.S. u clamps colour Sand H 1200 mm for fastening on the wall 38737 S.S. u clamps colour Sand H 1500 mm for fastening on the wall 38738 S.S. u clamps colour White H 1200 mm on beam bracket 38549 S.S. u clamps colour White H 1500 mm on beam bracket 38550 S.S. u clamps colour Sand H 900 mm on beam bracket 38551 S.S. u clamps colour Sand H 1200 mm on beam bracket 38552 S.S. u clamps colour Sand H 1500 mm on beam bracket 385531200/1500 mm high u clamp Tie beam and embedding kit spare parts code 210 mm wall conduit 31207 310 mm wall conduit 33076 110 mm wall conduit for liner pool 31211 Pre-embeddings (2) tie beam support bracket 31208 bearing support for embedding 31209 2x tie beam brackets 31910 2x tie beam stands liner vertical profile 31210 2x tie beam stands for fastening to pool wall with wall plugs 32645 386
  • 27. pool covers and rollers auTomaTIc covers: aBove-Ground models carlit above ground modelThe automatic cover model carlit is ideal for installation in existing swimming pools whose dimensions do notexceed 6 x 12 m. It is an above-ground cover, which means that the roller shaft is located out of the pool,anchored near the pool edge.The electrical connections have been simplified to the maximum. These consist of a two-wire cable betweenthe roller and the electrical switchboard (4 mm2 up to 15 m and 6 mm2 up to 30 m).The elements making up the carlit cover are the slats together with the mechanical kitmechanIcal KIT:consists of:- Two white or sand colour coated stainless steel stands- Ø 146 mm anodised aluminium roller shaft.- 24V tubular motor with limit switch adjustment, or 12 volts depending on the pool width.- key switch with self return to 0 point- Switchboard with 220/24V transformer. mechanical kit code code White coloured stands sand coloured stands Mechanical kit up to 4 m (up to 4 x 12 m) 31166 41053 Mechanical kit up to 5 m (up to 5 x 12 m) 31167 41054 Mechanical kit up to 6 m (up to 6 x 12 m) 35808 41055 coping stone cover Water level Skimmer Overflow To plant room carlit metal above ground model ne wRoller suitable to cover swimming pools up to 6x12 meters through a floating slats cover.consists of:- 2 inox coated supports with metal coloured varnish.- 1 aluminium roller shaft.- 1 motor equipped with limit switch system.- 1 key switch inserted in the support with a view to the swimming pool.- carlit Metal expo roller. max. pool dimensions code 4,03 m 44464 5,03 m 44465 6,03 m 44466 carlit Metal expo roller. 44467 387
  • 28. pool covers and rollers auTomaTIc covers: aBove-Ground models hand-operated carlit above ground model ne w Hand-operated roller suitable to cover swimming pools up to 5x10 meters through a floating slats cover. consists of: - 2 inox coated supports in white or sand colour. - 1 aluminium roller shaft. - 1 integrated reducing gear to facilitate the cover roll up. - 1 crank. mechanical kit code Mechanical kit up to 4,03 x 10 feet white colour 43225 Mechanical kit up to 5,03 x 10 feet white colour 43226 Mechanical kit up to 4,03 x 10 feet sand colour 43227 Mechanical kit up to 5,03 x 10 feet sand colour 43228 Mechanical kit ( Motor + switchboard ) 43229 carlit eco above ground model ne w Automatic cover specially designed to install in existing swimming pools up to 5,03 x 10 m with ladder. consists of: - 2 inox coated supports in white or sand colour - 1 aluminium roller shaft - 1 reducer motor tubular without limit switch system - 1 power supply unit with a key switch (3 positions) located in the support, next to the motor - 1 electric power supply support white colour support sand colour maxi. pool dimensions motor nm code code Width ≤ 4,03m Length ≤ 10m 150 43627 43629 Width ≤ 5,03m Length ≤ 10m 150 43628 43630 automatic carlit model with shower ne w Suitable to cover swimming pools up to 6 x 12 meters consists of: - 1 white inox coated support with curved shower arm and showerhead. - 1 aluminium roller shaft. - 1 reducer motor 12V and 150 Nm. - 1 power supply unit with a key switch (3 positions) located in the support, next to the motor. mechanical kit code carlit roller with shower, white colour, max. 4,03 x 12 m 45760 carlit roller with shower, white colour, max. 5,03 x 12 m 45761 carlit roller with shower, white colour, max. 6,03 x 12 m 45762 carlit roller with shower, sand colour, max. 4,03 x 12 m 45763 carlit roller with shower, sand colour, max. 5,03 x 12 m 45764 carlit roller with shower, sand colour, max. 6,03 x 12 m 45765 388
  • 29. pool covers and rollers auTomaTIc covers: aBove-Ground models above-ground: price calculationcalculaTInG The prIcea.- calculate the total length of slats according to the water surface length of the pool. calculate the price of the slats according to the price per m and the pool’s maximum width.B.- To calculate the total price add up the following aspects: • Price of the slats.* • Price of the step slats.* • Price of the mechanical kit (taking into consideration the pool’s maximum width). • cover strap fasteners.c.- Available options to be added to the above total cost: • Slat accessories*For pools with straight or lateral trapezoidal steps check pages 377 and 378.carlit carlit solar pool coverThe automatic solar pool cover carlit runs on solar energy, making it a very environmentally-friendly product. Itreduces water evaporation and heat loss in your pool. The cover also minimises premature evaporation of poolchemicals. certified by the French standard NF 90-308, the carlit solar pool cover guarantees higher quality,reducing possible accidents arising from children, animals, or objects falling into the water.precautions for installation: The sun musT dIrecTlY come InTo conTacT WITh The phoTovolTaIcplaTe. do no InsTall under a Tree or facInG norTh.main advantages:- easy to install, no cabling required (solar powered).- 40-cycle independence: once the battery is fully charged, in the absence of further light the cover can be extended and retracted 40 times.- easy to use cover with low maintenance costs.General features:- It allows pools up to 6 x 12 m with step area to be fully covered- Geared motor powered by solar energy. one of the supports features a photovoltaic cell.- Tubular 150 nm 12 v. geared motor. anodised aluminium pipe.- limit switch memory system.- 3 different slat and end piece colours are available: white, sand and blue.- Two 12 volt battery. mechanical pool cover coding code Mechanical kit up to 4 m (up to 4 x 12 m) 35917 Mechanical kit up to 5 m (up to 5 x 12 m) 35918 Mechanical kit up to 6 m (up to6 x 12 m) 35919 389
  • 30. pool covers and rollers auTomaTIc covers: aBove-Ground models above-ground: vallespir model Motor located at the foot of the roller shaft. Ideal for existing pools of up to 7.5 metres in width. It is composed of: Two white coated aluminium stands, RAL 9016, with fixing plates prepared for fastening to the coping stone, equipped with two white polyester covers. Roller shaft in anodised aluminium for pools of up to 5 m and 24 V 120 Nm geared motor with limit switch. 168 mm diameter stainless steel roller shaft for pools of more than 6 m in width, 24 V 120 Nm geared motor with limit switch. 220/24 V electrical power control cabinet. Remote control switch, in full view of the pool, with 3 fixed positions according to the French standard NF P90-308. maxi. pool dimensions motor (nm) code vallespir Pool 4 x 12 m 120 33087 Pool 5 x 12 m 120 33088 Pool 6 x 12 m 250 33089 Pool 7.5 x 15 m 250 33090 auTomaTIc covers: aBove-Ground models WITh proTecTIve casInG above-ground models with protective casing: capcir and narbonne easy to install and to start operating, ideal for installing in existing pools. They incorporate protective casing for the cover’s operating mechanical unit, providing greater safety and improving the design. It is ideal for pools of up to 6 metres in width. On the capcir model the motor is located in one side of the roller shaft, integrating perfectly with the cover ca- sing. It ensures easy handling of the motor in the case of breakdowns or servicing. The panel-protected casing is available in white PVc or IPe wood. cauTIon: do noT sIT on IT nor use IT To dIve. Its main elements are a Ø 146 mm anodised aluminium roller shaft, a geared motor of 120 Nm or 250 Nmotor, an electric cabinet and a 3-position key switch in accordance with the French standard NF P90-308. In the Narbonne model the motor is located inside the roller pipe itself in such a way that it is completely blended into the pool surroundings. The casing is protected by wood PVc or IPe timber. Its main elements are a 12V, 150 Nm tubular motor with limit switch, a key switch with automatic return incorporated in the lstand cover and a switchboard with a transformer. motor maxi. pool dimensions code code code code (nm) White pvc sand pvc pvc wood colour Ipe casing casing casing casing non-dismoun- dismountable non-dismoun- dismountable non-dismoun- dismountable protective casing table table table capcir Pool 4 x 12 m 120 31947 - - - - - 31951 Pool 5 x 12 m 120 31948 - - - - - 31952 Pool 6 x 14 m 250 31949 - - - - - 31953 narbonne Pool 4 x 12 m 150 33432 41061 41056 41059 37139 41063 37109 Pool 5 x 12 m 150 33433 41062 41057 41060 37140 41064 37110 Pool 6 x 12 m 150 37112 - 41058 - 37141 - 37111 390
  • 31. pool covers and rollers auTomaTIc covers: aBove-Ground models WITh proTecTIve casInG above-ground models with protective casing: solar narbonneThe automatic solar cover works with solar energy and stands out as it is highly environmental. keeps waterfrom evaporating and reduces the loss of heat in the pool. On the other hand, it minimizes early evaporationof chemical products. certified by the French NF 90-308 standard, the solar cover guarantees higher quality,reducing possible accidents due to children, animals, other objects falling into the pool… precauTIonsfor use: do noT sIT doWn on IT or use IT To dIve. precautions for installation: The sun musTdIrecTlY come InTo conTacT WITh The phoTovolTaIc plaTe. do no InsTall under a Tree orfacInG norTh.main advantages:- easy to install, no cabling required (solar powered).- 40-cycle independence: once the battery is fully charged, in the absence of further light the cover can be extended and retracted 40 times.- easy to use cover with low maintenance costs.General features:- covers pools of up to 6 x 12 with stairs- Roller powered by solar energy- Two 12 volt batteries- Limit switch memory system- 3 types of casings possible: PVc, wood coloured PVc and timber Access to the motor through the base of the casing- 150 Nm 12 volt motor.- Possibility to ask for a dismountable casing to have access to slats- Access to the motor without touching the slat casing.- The casing is protected with PVc, wood coloured PVc or IPe timber sheets. motor maxi. pool dimensions code code code code (nm) White pvc sand pvc pvc wood Ipe casing casing casing casing non-dismoun- dismountable non-dismoun- dismountable non-dismoun- dismountable protective casing table table table narbonne solar Pool 4 x 9 m 150 37561 41068 41065 41070 37564 41072 37567 Pool 5 x 12 m 150 37562 41069 41066 41071 37565 41073 37568 Pool 6 x 12 m 150 37563 - 41067 - 37566 - 37569 391
  • 32. pool covers and rollers auTomaTIc covers: commercIal and munIcIpal models ne w commercial roller model Borna This shaft is aimed to install on commercial indoor or outdoor swimming pools of 12.5 x 25 meters maximum. It can be used for bubble or reinforced polyethylene foam covers. The distance between the roller shaft and the pool edges must be reduced as much as possible to prevent abnormal wear and tear due to the friction on the coping. Technical features: - 24 V 250 Nm motor - 300 mm stainless steel shaft - Thermoplastic bearings fitted with stainless steel bearing - Motor protection cover in thermoformed AbS. - Remote control + key mechanical kit code code Mechanical kit up to 12.5 m (max. 12.5 x 25 m) 38734 ne w municipal model double Suitable to cover municipal swimming pools up to15 x 25 m with bubble or polyethylene based foam cover. Technical characteristics: 2 tubular motors of 120Nm and 24V. 2 aluminium shafts. 6 wheels. Remote control + key. Description: 6,03 x 25 m. code standard standard standardd packaging Weight kg. volume m3 Width ≤6,03m Length ≤ 25m 41441 - - - Width ≤8,03m Length ≤ 25m 41442 - - - ne w municipal model aerial Suitable to cover municipal swimming pools up to12.5x 25 m with bubble or polyethylene based foam cover. Technical characteristics: 150 x 150 mm white coated aluminium supports. Stainless steel shaft. Motor 250 Nm, 12V. Remote control + key. code standard standard standardd packaging Weight kg. volume m3 Width ≤12,53m Length ≤ 25m 41810 - - - above-ground models with protective casing: price calculation calculaTInG The prIce a.- calculate the total length of slats required according to the water surface length of the pool. Determine the price of the slats according to the price per m as per the maximum width of the pool. B.- To calculate the total price add up the following aspects: • Price of the slats.* • Price of the step slats.* • Price of the mechanical kit (bearing in mind the maximum pool width). • cover strap fasteners plus lift-prevention brackets.. c.- Available options to be added to the above total cost: • Slat accessories. *For pools with straight or lateral trapezoidal steps consult pages 377 and 378. 392
  • 33. pool covers and rollers auTomaTIc covers: dIsplaY models carlit display model (without motor)Width: 1.5 metres with blue, white and sand colour slats. code standard standard standardd packaging Weight kg. volume m3 33764 1 - - carlit solar display model ( without motor )Width: 1.5 m. With blue, white and sand colour slats. code standard standard standardd packaging Weight kg. volume m3 38740 1 - - capcir display model (without motor)Width: 1.5 m. casing half IPe timber and half PVc. code standard standard standardd packaging Weight kg. volume m3 33765 1 - - narbonne solar display model (without motor)Width: 1.5 m. Timber + PVc slats. code standard standard standard packaging Weight kg. volume m3 38821 1 - - 393

Related Documents