Conex >B< Press
Features & Benefits
• Extensive range of reducers and reducing tees.
• Both Copper and Red Brass for drinking water
• F...
IBP’s unique Pressing indicator
• O-ring seal has reduced cord section with
tri-lobal support bands either side
• 15-54...
Tri-lobal support bands
• Provide support between tube and body
• Maintain central position in the groove
• Ensure that...
Pressing indicator
• Specially designed o-ring, patent applied
• Leaks from 0.1 bar pressure when not pressed
• For hot...
Installation guide
• Ensure the tube and fitting sizes are compatible.
Cut the tube end square, and ensure it retains it...
Temperature and pressure ratings
• Stainless Steel Range
• For drinking water installations
• EPDM o-ring
• DVGW approval
• Available 15-54mm
Conex >B< Press Gas
• Yellow HNBR o-ring
• For liquid gas, foil oil & compressed gas installations
• Available 15-54mm ...
Temperature and pressure ratings
Conex >B< Press Solar
• Green FKM o-ring with pressing indicator
• Suitable for continuous operating temperatures up to ...
Temperature and pressure ratings
of 12

PRESSFITTING. Uniones de Cobre prensadas

www.ibpatcosa.com Pressfitting: Accesorios de unión prensada en cobre y bronce
Published on: Mar 4, 2016
Published in: Technology      
Source: www.slideshare.net


Transcripts - PRESSFITTING. Uniones de Cobre prensadas

  • 1. Conex >B< Press
  • 2. Features & Benefits • Extensive range of reducers and reducing tees. • Both Copper and Red Brass for drinking water • Fittings for gas, solar and stainless steel available • 15mm -108mm • Manufactured in accordance with EN 1254 & EN.ISO.9000.2001
  • 3. IBP’s unique Pressing indicator • O-ring seal has reduced cord section with tri-lobal support bands either side • 15-54mm fittings
  • 4. Tri-lobal support bands • Provide support between tube and body • Maintain central position in the groove • Ensure that a leak path remains open before pressing • Leaks at very low pressures (from 0.1 bar) • When pressed the material compresses into the gaps filling the missing material • Makes a permanent secure joint
  • 5. Pressing indicator • Specially designed o-ring, patent applied • Leaks from 0.1 bar pressure when not pressed • For hot and cold water applications • Fully tested to 40 bar pressure and approved by DVGW and WRAS • Uses existing jaws approved by IBP, no visual change to body appearance • Available in dimensions 12mm to 54mm
  • 6. Installation guide • Ensure the tube and fitting sizes are compatible. Cut the tube end square, and ensure it retains its shape. • Deburr the inside, and out of the tube. • Check o-rings are present in the fitting. • Insert the tube into the fitting until the tube stop, ensure the o-rings are not dislodged. • If the joint(s) is (are) not pressed, when pressure tested they will leak profusely. • Insert the correct jaw size into the >B< Press Tool • Open the press jaw, and align with the o-ring bead, allow the jaw to close. • Operate the press machine to press the fitting. The machine will stop at the end of its pressing cycle. • Open the jaw, and remove from the fitting. • Make sure all joints have been pressed.
  • 7. Temperature and pressure ratings
  • 8. • Stainless Steel Range • For drinking water installations • EPDM o-ring • DVGW approval • Available 15-54mm
  • 9. Conex >B< Press Gas • Yellow HNBR o-ring • For liquid gas, foil oil & compressed gas installations • Available 15-54mm • Advantica approved
  • 10. Temperature and pressure ratings
  • 11. Conex >B< Press Solar • Green FKM o-ring with pressing indicator • Suitable for continuous operating temperatures up to 140C and short term excursions up to 230C • Pressing indicator • Available in sizes 15-28mm • Pre-assembled • Tested & Approved by SPF
  • 12. Temperature and pressure ratings

Related Documents