The Twelfth International Conference on Computational
Structures Technology
Nonlinear Analyses on the medieval
“Ponte d...
Finite Element Code NOSA-ITACA[1]
•NOSA-ITACA is a freeware/open source software package developed by ISTI together with ...
Finite element code NOSA-ITACA [1]
The constitutive equation of masonry-like materials


 
E infinitesimal strain...
Finite Element Code NOSA-ITACA : some applications
• 1995 Battistero del Duomo, Volterra
• 1996 Arsenale Mediceo, Pisa
...
Case study : The Maddalena Bridge
The Maddalena bridge in Borgo a Mozzano, also known as the Devil’s Bridge, is one of It...
The bridge under its self-weight
Two finite element models have been defined using eight-node isoparametric brick element...
The bridge under its self-weight
Model 1: minimum principal values of the stress tensor [N/m2]
2-5 September 2014
Non-L...
The bridge under its self-weight
2-5 September 2014
Non-Linear analyses on the Medieval “Ponte del Diavolo”
8
Line of ...
Dynamic Analyses: Modal analyses
2-5 September 2014
Non-Linear analyses on the Medieval “Ponte del Diavolo”
9
Model 1 ...
Dynamic Analyses : Transient analysis
2-5 September 2014
Non-Linear analyses on the Medieval “Ponte del Diavolo”
10
Ti...
Dynamic Analyses : Results
2-5 September 2014
Non-Linear analyses on the Medieval “Ponte del Diavolo”
11
Maximum absol...
Dynamic Analyses : Results
2-5 September 2014
Non-Linear analyses on the Medieval “Ponte del Diavolo”
12
Absolute valu...
Dynamic Analyses : Results
2-5 September 2014
Non-Linear analyses on the Medieval “Ponte del Diavolo”
13
Discrete Four...
Dynamic Analyses : Results
2-5 September 2014
Non-Linear analyses on the Medieval “Ponte del Diavolo”
14
Discrete Four...
Dynamic Analyses : Results
2-5 September 2014
Non-Linear analyses on the Medieval “Ponte del Diavolo”
15
Discrete Four...
Conclusions
•The static and seismic behavior of the Maddalena bridge in Borgo a Mozzano has been studied using NOSA-ITACA...
Thank you for your kind attention
Daniele Pellegrini
of 17

Napoli2014

Published on: Mar 3, 2016
Source: www.slideshare.net


Transcripts - Napoli2014

  • 1. The Twelfth International Conference on Computational Structures Technology Nonlinear Analyses on the medieval “Ponte del Diavolo” in Borgo a Mozzano (Italy) A. De Falco2, M. Girardi1 and D.Pellegrini1 1 Institute of Information Science and Technologies, Italian National Research Council, Pisa, Italy 2 Department of Energy, Systems, Territory and Constructions, University of Pisa, Pisa, Italy CST2014 2-5 September 2014 Naples, Italy
  • 2. Finite Element Code NOSA-ITACA[1] •NOSA-ITACA is a freeware/open source software package developed by ISTI together with DICEA. It is part of the project 'Tools for modeling and assessing the structural behavior of ancient constructions' supported by the Region of Tuscany. •NOSA-ITACA is a finite element code that combines NOSA[2] with an open source graphic platform called SALOME. It is used to study the static and dynamic behavior of masonry constructions. •Masonry is described as a nonlinear elastic material with zero tensile strength and infinite or bounded compressive strength. [1] www.nosaitaca.it [2] M. Lucchesi, C. Padovani, G. Pasquinelli, N. Zani, “Masonry constructions: mechanical models and numerical applications”, Series: Lecture Notes in Applied and Computational Mechanics, Vol. 39, Berlin Heidelberg, Springer-Verlag, 2008 • Static analysis • Dynamic analysis • Stress field • Collapse load • Elastic, cracking and crushing strain • Displacement fields •Time-histories • NOSA-ITACA library: beam, shell, 2D and 3D elements (35 elements). 2-5 September 2014 Non-Linear analyses on the Medieval “Ponte del Diavolo” 2
  • 3. Finite element code NOSA-ITACA [1] The constitutive equation of masonry-like materials     E infinitesimal strain tensor, T Cauchy stress tensor, E e elastic part of the strain, E f fracture part of the strain, E c crushing part of the strain, E, n Young ‘s modulus and Poisson’s modulus,  0 < 0 maximum resistance to compression. Given E, it is possible to obtain Ef, Ec, T such that : [1] www.nosaitaca.it 2-5 September 2014 Non-Linear analyses on the Medieval “Ponte del Diavolo” 3
  • 4. Finite Element Code NOSA-ITACA : some applications • 1995 Battistero del Duomo, Volterra • 1996 Arsenale Mediceo, Pisa • 1998 Teatro Goldoni, Livorno • 1998 Chiesa Madre di S. Nicolò, Noto • 2004 Chiesa di Santa Maria Maddalena, Morano Calabro (CS) • 2005 Chiesa di San Ponziano, Lucca • 2008 Chiesa Abbaziale di Santa Maria della Roccella, Scolacium • 2008 Torre “Rognosa” , San Gimignano • 2010 Torre “delle Ore”, Lucca • 2012 Chiesa di San Francesco, Lucca • 2013 Dome of Cathedral of Massa Marittima(?), Grosseto • 2013 The “Voltone”, Livorno 2-5 September 2014 Non-Linear analyses on the Medieval “Ponte del Diavolo” 4
  • 5. Case study : The Maddalena Bridge The Maddalena bridge in Borgo a Mozzano, also known as the Devil’s Bridge, is one of Italy’s most intriguing medieval bridges. This sandstone and limestone masonry construction crosses the Serchio River for a total length of about one hundred meters. As it follows the positions of rocky outcrops, its path deviates from the direction perpendicular to the river by more than fifteen degrees. The bridge is made up of four semicircular arches having clear spans of 38 m, 14.5 m, 10.5 m and 8.5 m, and a transverse section between 3.5 m and 3.7 m wide. 2-5 September 2014 Non-Linear analyses on the Medieval “Ponte del Diavolo” 5
  • 6. The bridge under its self-weight Two finite element models have been defined using eight-node isoparametric brick elements (model 1) and four-node thick shell elements (model 2). For all analyses the bridge’s self-weight alone was considered; its constituent materials are modeled as a homogeneous masonry-like material with zero tensile strength and bounded compressive strength. Model 1: the brick elements model (30156 elements; 38626 nodes). Restrained nodes are highlighted 2-5 September 2014 Non-Linear analyses on the Medieval “Ponte del Diavolo” 6 Mechanical properties of the material used in the model
  • 7. The bridge under its self-weight Model 1: minimum principal values of the stress tensor [N/m2] 2-5 September 2014 Non-Linear analyses on the Medieval “Ponte del Diavolo” 7 Model 2: minimum principal values of the stress tensor [N/m2] -Equilibrium convergence reached with zero material tensile strength -Maximum compressive stress at base has a value of 1.3 Mpa Model 1: maximum principal f racture strains
  • 8. The bridge under its self-weight 2-5 September 2014 Non-Linear analyses on the Medieval “Ponte del Diavolo” 8 Line of thrust on the main arch for different values of Young’s modulus of the arch ring material: E=8000 MPa (blu line), E=3000 Mpa (red line) Sensitivity analysis was also performed by changing the material characteristics of the main arch barrel. The results are plotted in terms of line of thrust; the thrust intensity values on the transverse section of the arch ring are reported in the radial direction.
  • 9. Dynamic Analyses: Modal analyses 2-5 September 2014 Non-Linear analyses on the Medieval “Ponte del Diavolo” 9 Model 1 : Two examples of modes shape A preliminary modal analysis was performed in order to check the fundamental frequencies and modal shape of the bridge and their participing masses. Note that: -the first eight vibration modes are quite similar; -the participating mass associated with the fourth mode are different; -the 10° mode of model 1 corresponds to the 9° in model 2. The fully three-dimensional model is able to capture more complex out of plane and torsional vibration modes. However, model 2 accounts for the most important features of the bridge’s dynamic behavior.
  • 10. Dynamic Analyses : Transient analysis 2-5 September 2014 Non-Linear analyses on the Medieval “Ponte del Diavolo” 10 Time-histories of ground acceleration components recorded in Fivizzano by FIVI station on June 21, 2013 •The dynamic analyses were conducted on Model 2 by applying three history accelerations to the base nodes. The accelerogram employed in the analyses was recorded in Fivizzano station, not too far from the bridge. •A seismic shaking duration of 12 seconds has been used in all calculations. •The analysis was conducted using both the accelerogram as originally recorded and then amplified by a factor of 3 to emphasize the results and evaluate the bridge’s seismic behavior under extreme condition. •All analyses were first performed assuming masonry-like behavior with zero tensile strength and limited compressive resistance (3MPa) and then repeated for the elastic case. •Viscous damping was moreover assumed, with a damping matrix calculated in accordance with the Rayleigh assumption.
  • 11. Dynamic Analyses : Results 2-5 September 2014 Non-Linear analyses on the Medieval “Ponte del Diavolo” 11 Maximum absolute values of the displacements of the bridge extrados with respect to the base. The dashed lines represent the nonlinear cases and the continuous lines the linear analysis results. The blue lines refer to the unamplified case, while the amplified case is indicated in red.
  • 12. Dynamic Analyses : Results 2-5 September 2014 Non-Linear analyses on the Medieval “Ponte del Diavolo” 12 Absolute values of the minimum principal stresses attained at the intrados (left) and extrados (right). The dashed lines represent the nonlinear cases and the continuous lines represent the linear analysis results. The red line indicates the results for the case with input amplification; the blue lines refer to the unamplified case.
  • 13. Dynamic Analyses : Results 2-5 September 2014 Non-Linear analyses on the Medieval “Ponte del Diavolo” 13 Discrete Fourier Transform (DFT) of the y- acceleration at the base (black) and the y- acceleration responses for both the linear (continuous) and nonlinear (dashed) cases for the unamplified (blue) and amplified (red) input.
  • 14. Dynamic Analyses : Results 2-5 September 2014 Non-Linear analyses on the Medieval “Ponte del Diavolo” 14 Discrete Fourier Transform (DFT) of the x- acceleration at the base (black) and the x- acceleration responses for both the linear (continuous) and nonlinear (dashed) cases for the unamplified (blue) and amplified (red) input.
  • 15. Dynamic Analyses : Results 2-5 September 2014 Non-Linear analyses on the Medieval “Ponte del Diavolo” 15 Discrete Fourier Transform (DFT) of the z- acceleration at the base (black) and the z- acceleration responses for both the linear (continuous) and nonlinear (dashed) cases for the unamplified (blue) and amplified (red) input.
  • 16. Conclusions •The static and seismic behavior of the Maddalena bridge in Borgo a Mozzano has been studied using NOSA-ITACA, a finite element code that models masonry as a nonlinear elastic material with no tensile strength and limited compressive strength. •The bridge is studied under both its self-weight alone and by applying a base acceleration time history taken from records of an actual earthquake that occurred in the region on June 21st, 2013. Further analyses were also conducted using the original accelerogram amplified by a factor of three. •The static analysis highlights the good response of the bridge under its self-weight alone. •The dynamic analyses reveal the differences between the linear and nonlinear responses in term of displacement, stress level and frequency content. The material’s nonlinear behavior alters the frequency content of the structural response and the stress state with respect to the linear case. •Further work on the code is necessary to guide interpretation of the results and improve detection of masonry damage. Nonetheless, by neglecting all forms of dissipation apart from viscous damping, the constitutive equation of masonry–like material enables arriving at a generally conservative estimate of the structure’s dynamic response. 2-5 September 2014 Non-Linear analyses on the Medieval “Ponte del Diavolo” 16
  • 17. Thank you for your kind attention Daniele Pellegrini

Related Documents