Nadeem Naseem CV
Published on: Mar 3, 2016
Transcripts - Nadeem Naseem CV
Name: NADEEM NASEEM.
Address: H#353 Mughlia Park Near Noor Jahan’s
Tomb Shahdra Lahore.
Contact No: +923334733246.
Name: NADEEM NASEEM.
S/O: NASIM AHMAD.
Passport No: AB9851792
N.I.C No: 35202-5226179-7.
Domicile: Lahore, (Punjab).
2000 Matric 75.76% Lahore.
2004 D.A.E. (Electrical) 78.08% Lahore.
To enhance my skills by working with a dynamic and progressive organization for bright future.
Experience: 10 years
I am working in SABA POWER PLANT (134MW) as a Sr. Electrical Technician since
Saba Power is RFO fired 134 MW thermal power plant having B&W USA’s 435 t/h boiler &
Toshiba’s steam turbine & generator. Westing house Switch Gear System’s.
Worked in Fauji Fertilizer Company as an Electrical Technician from 16/07/2007 to 02/02/2010.
Two year apprenticeship (from20/06/2005 to 20/06/2007) as an ELECTRICAL TECHNICIAN
from Fauji Fertilizer Company Goth Machhi Sadiqabad Distt. Rahim yar khan.
• I was a team member in major overhauling of 134MW generator.
• Performed overhauling, preventive maintenance and testing of excitation system of 170 MVA
Toshiba’s generator and 31.375 MVA Turbo Gas Generators 6.3 KV 18.5MW, MS-5000 (General
Electric U.S.A made).
• Worked on 0.9MW WAUKESHA generator.
• Changed carbon brushes of 18.5MW generator excitation system in running condition.
• Worked on two Emergency Diesel Generators 6.3 KV, 1.9 MW & 2.1 MW (Made of Ansaldo and
Ergen respectively) with brushless excitation system.
• Performed electrical wiring, troubleshooting and preventive maintenance of ''Diesel Generators'',
380 Volts, 250 KVA, 200KW (Fermont, U.S.A made).
• Familiar with Generator protections, their operation and performed troubleshooting.
• Performed polarizing index testing on generators and motors.
Familiar with operation, configuration and testing of microprocessor based and static relays for
Motors (IMM7990, IMM 7000, MP6, and MP3S, IQ1000II, GE369), generators and transformers
Worked on PLC project SLC 5/05 installed at FFC Bagg-1 during T/A 2006. This project includes
ladder logic development, drawings drawn, testing commissioning and troubleshooting.
Familiar with the operation preventive, maintenance & troubleshooting of 80 KVA rating UPS
which involved Rectifier-Inverter-Static Switch, made by Sice Italy.
Preventive maintenance, troubleshooting and testing of transformers up to 160MVA, 132KV
Preventive maintenance and testing of 132kv CBs, Isolators, Earthing switch, CTs, PTs, and
Protective Relays also performed troubleshooting.
LV, MV Motors Up To 2.15 MW , 6.3KV:
Maintenance & Overhauling, Meggering, PI & Bearing replacement of motors up to 150
KW/380V, 2.15 MW/6.3KV.
LT & HT Cables Jointing & Termination:
Cable termination, jointing & punching up to 240mm sq/6.3KV.
L.V AND M.V SWITCH GEARS:
Maintenance and testing of following switch gears and panels of MS, MCCM, and PC & MCC
(A) Magnetic air break CB up to 3150A, 6.3kv (B) Sulpher hexa fluoride (SF6) 1600A, 6.3kv
(C)Oil CB up to 800A, 6.3kv (D) Vaccum contactors up to450A, 6.3kv
(E) L.v CB up to 1600A and Magnetic Contactors up to 300A
Maintenance & calibration of MOVs.
Maintenance & troubleshooting of welding sets motor generator type & transformer type.
Thermo generators & CPT:
Maintenance & troubleshooting of thermo generators and cathodic protection transformers.
Maintenance, Charging & Discharging of Lead acid, Lead calcium & Nickel cadmium batteries up
Overhead Cranes & Elevators:
Maintenance & troubleshooting of elevator & cranes up to 20 tons.
Worked on Conveyor belts, Scraper, Tripper & PLC based Weighing machines.
PTW (permit to work procedure):
I have good knowledge and working experience according to PTW instruction. Sound knowledge
of Cold, Hot, electrical, excavation, civil, confined space, Vessel entry, PTW Procedures
according to HSE standard.
Uses of Test Equipment:
Familiar with the use of test equipment like dielectric strength tester, Multiamps relay tester,Doble
relay test set, High pot tester (300mA, 5KV), Frequency meter, Digital low resistance meter
(DLRO), Induction heater, Earth tester, Cable fault locater, Phase sequence meter, Megger, Lux
meter, Oil treatment machine & Heating blower.
Uses of Tools:
Hydraulic puller, Knock out punch, Hydraulic lugs press & cable cutter.
Have presented on followings
• Allen Bradley Plc system Model slc5/05.
• Load cell.
• Weighing Machine.
Have well knowledge of personal & plant safety.
• Hazardous area classification.
• Explosion proof categories.
• Integral of protection (IP codes).
• Gas grouping.
• Surface temperature classes.
• Hazard, Risk, Probability & Accident etc.
SKILL IMPROVEMENT COURSES:
Have attended following S.I programmes here at FFC Technician Training Center
(1)Current tmf & potential tmf (2) Turnaround Safety
(3) M.V Cable jointing and Termination (4) Power tmf
(5) Induction motor (6) Synchronous motor.
Here in SABA POWER PLANT as a senior Electrical Tech. I am responsible to perform or
supervise all the jobs related to electrical field e.g. troubleshooting, record keeping, electrical
drawings updating, modifications in electrical circuits and job planning.