EQUIPMENT SOLUTIONS
Stencil Processing Units, Washout Booths, Extraction Fans, Solvent Recirculation
...
Stencil Processing Units, Washout Booths, Extraction Fans, Solvent
Recirculation Unit, High Pressure ...
Stencil Processing Units, Washout Booths, Extraction Fans, Solvent
Recirculation Unit, High Pressure ...
Specifications
Stencil Processing Units
Model No. 0 ...
of 4

Natgraph Stencil Processing Units, Washout Booths Etc

Published on: Mar 3, 2016
Source: www.slideshare.net


Transcripts - Natgraph Stencil Processing Units, Washout Booths Etc

  • 1. EQUIPMENT SOLUTIONS Stencil Processing Units, Washout Booths, Extraction Fans, Solvent Recirculation Unit, High Pressure Washers & Angled Light Boxes stencil processing screen printing air force ultra violet infra red Natgraph manufacture a complete range of The ink removal version has an in-built Stencil Processing Units and Washout Booths ducting system for the extraction of solvent in 7 standard sizes to accept screen frames laden air. An optional fan is available, this from small through to large print formats. complies with the ATEX directive 94/9/EC required by European legislation. This equipment is designed to meet the operational needs of fine quality stencil Natgraph manufacture an optional Solvent processing and manual screen cleaning, Recirculation Unit to be used when screen as well as environmental and safety cleaning by hand, this unit saves on solvent requirements. usage as well as preventing solvents from entering the mains drainage system. This unit The Stencil Processing Units are brightly also complies with the ATEX directive. illuminated to aid in ‘image washout’ and are equipped with an in-line water heater The Angled Light Box is designed to aid in and hand held spray head. ‘touching in’ photo stencils, available in 4 standard sizes these units allow convenient The Washout Booth is available in 2 access to even the largest of sizes. versions, for stencil removal with water and screen cleaning (ink removal) using solvents. Stencil Processing Units Solvent Recirculation Unit Washout Booths High Pressure Washers Extraction Fans Angled Light Boxes Natgraph Limited, Dabell Avenue, Blenheim Industrial Estate, Nottingham NG6 8WA, United Kingdom Tel: +44 (0)115 979 5800 Fax: +44 (0)115 979 5700 sales@natgraph.co.uk. www.natgraph.co.uk
  • 2. Stencil Processing Units, Washout Booths, Extraction Fans, Solvent Recirculation Unit, High Pressure Washers & Angled Light Boxes Stencil Processing Units Features • Large, illuminated, acrylic panel • Electric water heater • Stainless steel construction • Water temperature gauge • Easy tube change • Adjustable frame height The Natgraph range of Stencil Processing Units is An adjustable frame support bar is fitted, allowing available in 7 standard sizes to accept screen frames small frames to be used even in the largest model, to print from small through to large format sizes. They this bar is easily moved from one height position are manufactured from stainless steel with 4 steel legs to another. An instant water heater is located on with adjustable feet. the outside of the unit, which supplies temperature controlled water to a hand held spray head. The These units have a brightly illuminated acrylic rear temperature of the water coming from the spray head panel which assists in the washing out of fine detail is indicated by an in-line temperature gauge. stencils to aid in the complete removal of the image (A 15mm, high pressure cold mains water supply area. Illumination is provided by a high efficiency is required.) set of fluorescent tubes operated by a safety switch, Stencil Processing these tubes can be easily changed via a rear These units require a single phase power supply. Unit model 3 access door. Washout Booths Features • Swivel feet • Stainless steel construction • Standard or vented versions • Adjustable frame height • Optional extraction fan The Natgraph range of Washout Booths is available The vented versions are intended for screen cleaning in 7 standard sizes and 2 different versions, to with solvents for the removal of waste inks and accept screen frames to print from small through therefore have an integral ducting system through to large format sizes. They are manufactured from which solvent laden air is drawn down into the base stainless steel with 4 steel legs with adjustable feet. of the booth, away from the operator. This air then passes up through the double back wall of the booth An adjustable frame support bar is fitted, allowing to the standard ducting connection flange on the small frames to be washed out even in the largest top of the unit, from where the air can be vented to model, this bar is easily moved from one height atmosphere via an extraction fan. position to another. This booth is ideal for the solvent cleaning process, Washout Booth The standard versions of these booths are intended as a deep construction and fold in lip around the model 3 for cleaning with water and can be used in extremes are designed to minimise splash-back. The conjunction with a separate High Pressure Washer 1 1⁄2” waste outlet should not be connected to mains unit, to re-use screen frames by ‘blasting off’ the used drainage unless the screen cleaning solvents used for stencil. This booth is ideal for this process, as a deep this purpose are ‘bio-degradable’. construction and fold in lip around the extremes are designed to minimise splash-back. The 1.1⁄2” waste outlet can be connected to mains drainage for this process as long as the chemicals used are ‘bio-degradable’. EQUIPMENT SOLUTIONS 2 of 4
  • 3. Stencil Processing Units, Washout Booths, Extraction Fans, Solvent Recirculation Unit, High Pressure Washers & Angled Light Boxes Extraction Fans Features • Special screen cleaning brush head • Cast aluminium handle • Stainless steel construction • ATEX approved, flameproof motor • Filter basket with weir filter • Regulating valve Natgraph can also supply an optional extraction potentially explosive atmospheres. The fan can fan to operate with the vented versions of the mount directly onto the top of the booth, or can be booth. These fans comply with the ATEX Directive fitted into the ducting system away from the booth 94/9/EC, required by European legislation for to reduce noise levels. These fans require a three electrical and mechanical equipment used in phase power supply. ATEX Approved Extraction Unit Solvent Recirculation Unit The Natgraph Solvent Recirculation Unit is made of for re-use. The filter basket can be lifted out of the stainless steel, consisting of a 30 litre, freestanding unit to enable convenient and safe disposal of the holding tank that contains a filter basket, and waste materials, fresh solvent can be added whilst flameproof solvent pump which complies with the the lid is removed. ATEX directive 94/9/EC, required by European legislation for electrical and mechanical equipment A control valve regulates the solvent flow through used in potentially explosive atmospheres. the solvent resistant hose to the specially designed, hand held brush for screen cleaning. A large, The removable filter basket has a weir system flexible return pipe connects between the Washout incorporated in it, with progressively finer filtering Booth and the Solvent Recirculation Unit. This unit to remove large debris and smaller pieces of dried requires a three phase power supply as standard, ink etc. The residue of solids from within the dirty but can be supplied single phase as an option. cleaning solvent settles to the bottom of the basket, leaving the cleaner solvent to be pumped back High Pressure Washers Natgraph supply 2 types of Karcher High Pressure unit and ideal for small to medium frame sizes, Washers to wash off used stencils. These are whilst the larger HD 6/13 C Plus has a bar industrial models, not to be confused with domestic of 130, and is suitable for all frame sizes with units. The smaller HD 5/11 C (240V) has a intensive use. These units require a single phase maximum pressure of 110 psi, this is an upright power supply. Karcher HD5/11 C & HD6/13 C Plus Angled Light Boxes Features • Gold diffuser • Toughened glass • Cooling fans • Adjustable frame support bar • Easy tube change • Box section stand The Natgraph Angled Light Boxes are available in An adjustable frame support bar is fitted to the 4 standard sizes and are designed for checking front to accept different sized frames. Large access and re-touching photo stencils with ease. A bright panels located at the side give access for easy illuminated toughened glass panel, (fan cooled), is tube change etc. A box section stand fitted with diffused with a gold acrylic sheet, which is restful adjustable swivel feet supports the unit, and the Angled Light box to the eye and has a reduced UV output. Thus unit dismantles into pieces for ease of installation allowing unexposed stencils to be ‘blue fillered’ access. These units require a single phase power without fogging. supply EQUIPMENT SOLUTIONS 3 of 4
  • 4. Specifications Stencil Processing Units Model No. 0 1 2 3 4 5 6 Max. Frame Size 76 x 91cm 107 x 132cm 155 x 132cm 183 x 152cm 229 x 183cm 270 x 221cm 320 x 221cm (30” x 36”) (42” x 52”) (61” x 52”) (72” x 60”) (90” x 72”) (106” x 87”) (125” x 87”) Illuminated Area 56 x 71cm 91 x 102cm 122 x 112cm 152 x 132cm 191 x 168cm) tbc tbc (22” x 28”) (36” x 40”) (48” x 44”) (60” x 52”) (75” x 66”) tbc tbc Height 168cm (66”) 180cm (71”) 191cm (75”) 209cm (82”) 246cm (97”) tbc tbc Width 102cm (40”) 132cm (52”) 178cm (70”) 208cm (82”) 254cm (100”) tbc tbc Depth 84cm (33”) 84cm (33”) 84cm (33”) 84cm (33”) 84cm (33”) 84cm (33”) 84cm (33”) Weight 86kgs. (190lbs.) 109kgs. (240lbs.) 124kgs. (273lbs.) 148kgs. (326lbs.) 199kgs.(439lbs.) 225kgs. (495lbs) 255 (560lbs) Voltage Single Phase 220/240 Volts 50/60Hz. AC Power 8.5kW Current 40 Amps Angled Light Boxes Model No. 2 3 4 5 Max. Frame Size 107 x 132cm (42” x 52”) 155 x 132cm (61” x 52”) 186 x 150cm (73” x 59”) 223 x 179cm (88” x 70”) Height 168cm (66”) 182cm (72”) 182cm (72”) 226cm (89”) Width 147cm (57”) 177cm (70”) 208cm (82”) 245cm (97”) Depth 66cm (26”) 72cm (28”) 72cm (28”) 72cm (28”) Weight 109kgs. (240lbs.) 124kgs. (273lbs.) 148kgs. (326lbs.) 199kgs. (439lbs.) Voltage Single Phase 220/240 Volts 50/60 Hz. AC Power 0.6kW 0.8kW 1kW 1.8kW Current 2.5 Amps 3.3 Amps 4.2 Amps 7.5 Amps Solvent Recirculation Unit Height 60cm (24”) Width 38cm (15”) incl. Pipe work Depth 53cm (21”) Weight 38kgs. (84lbs.) Voltage Three Phase 380/400 Volts 50/60 Hz. AC Power 0.26kW Current 1 Amp Washout Booths Model No. 0 1 2 3 4 5 6 Max. Frame Size 76x91cm (30”x36”) 107x132cm (42”x52”) 155x132cm (61”x52”) 183x152cm (72”x60”) 229x183cm (90”x72”) 270x221cm (107”x87”) 320x221cm (125”x87”) Height 168cm (66”) 180cm (71”) 191cm (75”) 209cm (82”) 246cm (97”) 290cm (115”) 290cm (115”) Width 86cm (34”) 117cm (46”) 163cm (64”) 193cm (76”) 239cm (94”) 310cm (122”) 360cm (142”) Depth 71cm (28”) 82cm (32”) tbc tbc tbc tbc tbc Weight 65kgs. (143lbs) 70kgs. (154lbs) 92kgs. (203lbs) 110kgs. (243lbs) 170kgs. (375lbs) 190kgs. (418lbs) 230kgs. (506lbs) Distributed by: Download our brochures at www.natgraph.co.uk 4 of 4 05 The manufacturer’s policy is one of continuous improvement and the manufacturer therefore reserves the right to change or modify the design without prior notice. The technical specifications given are therefore for information only.

Related Documents