Polynomials andPolynomials and
FactoringFactoring
The basic building blocks ofThe basic building blocks of
algebraic expre...
The height in feet of
a fireworks launched
straight up into the air
from (s) feet off the
ground at velocity (v) after
(t)...
In regular math books, this is called
“substituting” or “evaluating”… We are given
the algebraic expression below and aske...
You try a couple
Use the same expression but let
x = 2 and
x = -1
What about x = -5?
Be careful with the negative! Use ( )...
That critter in the last slide is a polynomial.
x2
– 4x + 1
Here are some others
x2
+ 7x – 3
4a3
+ 7a2
+ a
nm2
– m
3x – 2
5
For now (and, probably, forever) you
can just think of a polynomial as a
bunch to terms being added or
subtracted. The ter...
Some math words to know!
monomial – is an expression that is a number, a
variable, or a product of a number and one or
mor...
trinomial – is the sum of three monomials. It has
three unlike terms. (tri implies three).
x2
+ 2x + 1, 3x2
– 4x + 10, 2x ...
The degree of a monomial - is the sum of the
exponents of its variables. For a nonzero
constant, the degree is 0. Zero has...
Here’s a polynomial
2x3
– 5x2
+ x + 9
Each one of the little product things is a “term”.
2x3
– 5x2
+ x + 9
So, this guy ha...
Since “poly” means many, when there is only one term,
it’s a monomial:
5x
When there are two terms, it’s a binomial:
2x + ...
So, there’s one word to remember to classify:
degree
Here’s how you find the degree of a polynomial:
Look at each term,
wh...
This is a 1st
degree polynomial
3x – 2
What about this dude?
8
How many letters does he have? ZERO!
So, he’s a zero degree...
3x4
+ 5x2
– 7x + 1
The polynomial above is in standard form.
Standard form of a polynomial - means that
the degrees of its...
Classifying Polynomials
Write each polynomial in standard form. Then name each
polynomial based on its degree and the numb...
Write each polynomial in standard
form. Then name each polynomial
based on its degree and the
number of terms.
a) 6x2
+ 7 ...
Adding and SubtractingAdding and Subtracting
PolynomialsPolynomials
The sum or differenceThe sum or difference
Just as you can perform operations on
integers, you can perform operations on
polynomials. You can add polynomials using t...
Addition of
Polynomials
Method 1 (vertically)
Line up like terms. Then add the coefficients.
4x2
+ 6x + 7 -2x3
+ 2x2
– 5x ...
Simplify each sum
• (12m2
+ 4) + (8m2
+ 5)
• (t2
– 6) + (3t2
+ 11)
• (9w3
+ 8w2
) + (7w3
+ 4)
• (2p3
+ 6p2
+ 10p) + (9p3
+...
Find the perimeter of
each figure
9c - 10
5c + 2
17x - 6
5x
+
1
9x
8x-2
Recall that the
perimeter of a figure is
the sum o...
Subtracting
Polynomials
Earlier you learned that subtraction means to add the
opposite. So when you subtract a polynomial,...
Method 2 (horizontally)
Simplify (2x3
+ 5x2
– 3x) – (x3
– 8x2
+ 11)
Write the opposite of each term.
2x3
+ 5x2
– 3x – x3
+...
Simplify each
subtraction
• (17n4
+ 2n3
) – (10n4
+ n3
)
• (24x5
+ 12x) – (9x5
+ 11x)
• 6c – 5 2b + 6 7h2
+ 4h - 8
-(4c + ...
Multiplying and FactoringMultiplying and Factoring
Using the Distributive PropertyUsing the Distributive Property
Observe the rectangle below. Remember that
the area A of a rectangle with length l and
width w is A = lw. So the area of t...
We can further divide the rectangle into
squares with side lengths of x.
x + x + x + x
x
+
x
x2
x2
x2
x2
x2
x2
x2
x2
x + x...
To simplify a product of monomials
(4x)(2x)
• Use the Commutative and Associative Properties
of Multiplication to group th...
You can also use the Distributive Property for
multiplying powers with the same base when
multiplying a polynomial by a mo...
Simplify each product.
a) 4b(5b2
+ b + 6)
b) -7h(3h2
– 8h – 1)
c) 2x(x2
– 6x + 5)
d) 4y2
(9y3
+ 8y2
– 11)
Remember,
Multip...
Factoring a Monomial
from a Polynomial Factoring a polynomial
reverses the
multiplication process.
To factor a monomial
fr...
Find the GCF of the terms of each polynomial.
a) 5v5
+ 10v3
b) 3t2
– 18
c) 4b3
– 2b2
– 6b
d) 2x4
+ 10x2
– 6x
Factoring Out a
Monomial
Factor 3x3
– 12x2
+ 15x
Step 1
Find the GCF
3x3
= 3 · x · x · x
12x2
= 2 · 2 · 3 · x · x
15x = 3 ...
Use the GCF to factor each polynomial.
a) 8x2
– 12x
b) 5d3
+ 10d
c) 6m3
– 12m2
– 24m
d) 4x3
– 8x2
+ 12x
Try to factor ment...
Multiplying BinomialsMultiplying Binomials
Using the infamous FOIL methodUsing the infamous FOIL method
Using the
Distributive
Property
As with the other
examples we have
seen, we can also
use the Distributive
Property to find...
Simplify each
product.
a) (6h – 7)(2h + 3)
b) (5m + 2)(8m – 1)
c) (9a – 8)(7a + 4)
d) (2y – 3)(y + 2)
Multiplying using FOIL
Another way to organize multiplying two binomials is
to use FOIL, which stands for,
“First, Outer, ...
Simplify each product
using FOIL
a) (3x + 4)(2x + 5)
b) (3x – 4)(2x + 5)
c) (3x + 4)(2x – 5)
d) (3x – 4)(2x – 5)
Remember,...
Applying
Multiplication of
Polynomials.
Find the area of the
shaded (beige) region.
Simplify.
area of outer rectangle =
(2...
Find the area of the
shaded region.
Simplify.
Find the area of the green shaded region. Simplify.
5x + 8
6x+2
5x
x + 6
FOIL works when you are multiplying two binomials.
However, it does not work when multiplying a trinomial
and a binomial.
...
Multiply using the
horizontal method.
(2x – 3)(4x2
+ x – 6)
= 2x(4x2
) + 2x(x) + 2x(-6) – 3(4x2) – 3(x) – 3(-6)
= 8x3
+ 2x...
Simplify using the Distributive Property.
a) (x + 2)(x + 5)
b) (2y + 5)(y – 3)
c) (h + 3)(h + 4)
Simplify using FOIL.
a) (...
Find the area of the
green shaded region.
x + 3
x-3 x
x+2
of 45

Polynomials and factoring

Published on: Mar 4, 2016
Source: www.slideshare.net


Transcripts - Polynomials and factoring

  • 1. Polynomials andPolynomials and FactoringFactoring The basic building blocks ofThe basic building blocks of algebraic expressionsalgebraic expressions
  • 2. The height in feet of a fireworks launched straight up into the air from (s) feet off the ground at velocity (v) after (t) seconds is given by the equation: -16t2 + vt + s Find the height of a firework launched from a 10 ft platform at 200 ft/s after 5 seconds. -16t2 + vt + s -16(5)2 + 200(5) + 10 =400 + 1600 + 10 610 feet
  • 3. In regular math books, this is called “substituting” or “evaluating”… We are given the algebraic expression below and asked to evaluate it. x2 – 4x + 1 We need to find what this equals when we put a number in for x.. Like x = 3 Everywhere you see an x… stick in a 3! x2 – 4x + 1 = (3)2 – 4(3) + 1 = 9 – 12 + 1 = -2
  • 4. You try a couple Use the same expression but let x = 2 and x = -1 What about x = -5? Be careful with the negative! Use ( )! x2 – 4x + 1 = (-5)2 – 4(-5) + 1 = 46
  • 5. That critter in the last slide is a polynomial. x2 – 4x + 1 Here are some others x2 + 7x – 3 4a3 + 7a2 + a nm2 – m 3x – 2 5
  • 6. For now (and, probably, forever) you can just think of a polynomial as a bunch to terms being added or subtracted. The terms are just products of numbers and letters with exponents. As you’ll see later on, polynomials have cool graphs.
  • 7. Some math words to know! monomial – is an expression that is a number, a variable, or a product of a number and one or more variables. Consequently, a monomial has no variable in its denominator. It has one term. (mono implies one). 13, 3x, -57, x2 , 4y2 , -2xy, or 520x2 y2 (notice: no negative exponents, no fractional exponents) binomial – is the sum of two monomials. It has two unlike terms (bi implies two). 3x + 1, x2 – 4x, 2x + y, or y – y2
  • 8. trinomial – is the sum of three monomials. It has three unlike terms. (tri implies three). x2 + 2x + 1, 3x2 – 4x + 10, 2x + 3y + 2 polynomial – is a monomial or the sum (+) or difference (-) of one or more terms. (poly implies many). x2 + 2x, 3x3 + x2 + 5x + 6, 4x + 6y + 8 • Polynomials are in simplest form when they contain no like terms. x2 + 2x + 1 + 3x2 – 4x when simplified becomes 4x2 – 2x + 1 • Polynomials are generally written in descending order. Descending: 4x2 – 2x + 1 (exponents of variables decrease from left to right) The ending of these words “nomial” is Greek for “part”. Constants like 12 are monomials since they can be written as 12x0 = 12 · 1 = 12 where the variable is x0 .
  • 9. The degree of a monomial - is the sum of the exponents of its variables. For a nonzero constant, the degree is 0. Zero has no degree. Find the degree of each monomial a) ¾x degree: 1 ¾x = ¾x1 . The exponent is 1. b) 7x2 y3 degree: 5 The exponents are 2 and 3. Their sum is 5. c) -4 degree: 0 The degree of a nonzero constant is 0.
  • 10. Here’s a polynomial 2x3 – 5x2 + x + 9 Each one of the little product things is a “term”. 2x3 – 5x2 + x + 9 So, this guy has 4 terms. 2x3 – 5x2 + x + 9 The coefficients are the numbers in front of the letters. 2x3 - 5x2 + x + 9 term term term term 2 5 1 9 We just pretend this last guy has a letter behind him. Remember x = 1 · x NEXT
  • 11. Since “poly” means many, when there is only one term, it’s a monomial: 5x When there are two terms, it’s a binomial: 2x + 3 When there are three terms, it a trinomial: x2 – x – 6 So, what about four terms? Quadnomial? Naw, we won’t go there, too hard to pronounce. This guy is just called a polynomial: 7x3 + 5x2 – 2x + 4 NEXT
  • 12. So, there’s one word to remember to classify: degree Here’s how you find the degree of a polynomial: Look at each term, whoever has the most letters wins! 3x2 – 8x4 + x5 This is a 7th degree polynomial: 6mn2 + m3 n4 + 8 This guy has 5 letters… The degree is 5. This guy has 7 letters… The degree is 7 NEXT
  • 13. This is a 1st degree polynomial 3x – 2 What about this dude? 8 How many letters does he have? ZERO! So, he’s a zero degree polynomial This guy has 1 letter… The degree is 1. This guy has no letters… The degree is 0. By the way, the coefficients don’t have anything to do with the degree. Before we go, I want you to know that Algebra isn’t going to be just a bunch of weird words that you don’t understand. I just needed to start with some vocabulary so you’d know what the heck we’re talking about!
  • 14. 3x4 + 5x2 – 7x + 1 The polynomial above is in standard form. Standard form of a polynomial - means that the degrees of its monomial terms decrease from left to right. term termtermterm Polynomial Degree Name using Degree Number of Terms Name using number of terms 7x + 4 1 Linear 2 Binomial 3x2 + 2x + 1 2 Quadratic 3 Trinomial 4x3 3 Cubic 1 Monomial 9x4 + 11x 4 Fourth degree 2 Binomial 5 0 Constant 1 monomial Once you simplify a polynomial by combining like terms, you can name the polynomial based on degree or number of monomials it contains.
  • 15. Classifying Polynomials Write each polynomial in standard form. Then name each polynomial based on its degree and the number of terms. a) 5 – 2x -2x + 5 Place terms in order. linear binomial b) 3x4 – 4 + 2x2 + 5x4 Place terms in order. 3x4 + 5x4 + 2x2 – 4 Combine like terms. 8x4 + 2x2 – 4 4th degree trinomial
  • 16. Write each polynomial in standard form. Then name each polynomial based on its degree and the number of terms. a) 6x2 + 7 – 9x4 b) 3y – 4 – y3 c) 8 + 7v – 11v
  • 17. Adding and SubtractingAdding and Subtracting PolynomialsPolynomials The sum or differenceThe sum or difference
  • 18. Just as you can perform operations on integers, you can perform operations on polynomials. You can add polynomials using two methods. Which one will you choose? Closure of polynomials under addition or subtraction The sum of two polynomials is a polynomial. The difference of two polynomials is a polynomial.
  • 19. Addition of Polynomials Method 1 (vertically) Line up like terms. Then add the coefficients. 4x2 + 6x + 7 -2x3 + 2x2 – 5x + 3 2x2 – 9x + 1 0 + 5x2 + 4x - 5 6x2 – 3x + 8 -2x3 + 7x2 – x - 2 Method 2 (horizontally) Group like terms. Then add the coefficients. (4x2 + 6x + 7) + (2x2 – 9x + 1) = (4x2 + 2x2 ) + (6x – 9x) + (7 + 1) = 6x2 – 3x + 8 Example 2: (-2x3 + 0) + (2x2 + 5x2 ) + (-5x + 4x) + (3 – 5) You can rewrite each polynomial, inserting a zero placeholder for the “missing” term. Example 2 Use a zero placeholder
  • 20. Simplify each sum • (12m2 + 4) + (8m2 + 5) • (t2 – 6) + (3t2 + 11) • (9w3 + 8w2 ) + (7w3 + 4) • (2p3 + 6p2 + 10p) + (9p3 + 11p2 + 3p ) Remember Use a zero as a placeholder for the “missing” term. Word Problem
  • 21. Find the perimeter of each figure 9c - 10 5c + 2 17x - 6 5x + 1 9x 8x-2 Recall that the perimeter of a figure is the sum of all the sides.
  • 22. Subtracting Polynomials Earlier you learned that subtraction means to add the opposite. So when you subtract a polynomial, change the signs of each of the terms to its opposite. Then add the coefficients. Method 1 (vertically) Line up like terms. Change the signs of the second polynomial, then add. Simplify (2x3 + 5x2 – 3x) – (x3 – 8x2 + 11) 2x3 + 5x2 – 3x 2x3 + 5x2 – 3x -(x3 – 8x2 + 0 + 11) -x3 + 8x2 + 0 - 11 x3 +13x2 – 3x - 11 Remember, subtraction is adding the opposite. Method 2
  • 23. Method 2 (horizontally) Simplify (2x3 + 5x2 – 3x) – (x3 – 8x2 + 11) Write the opposite of each term. 2x3 + 5x2 – 3x – x3 + 8x2 – 11 Group like terms. (2x3 – x3 ) + (5x2 + 8x2 ) + (3x + 0) + (-11 + 0) = x3 + 13x2 + 3x - 11 = x3 + 13x2 + 3x - 11
  • 24. Simplify each subtraction • (17n4 + 2n3 ) – (10n4 + n3 ) • (24x5 + 12x) – (9x5 + 11x) • 6c – 5 2b + 6 7h2 + 4h - 8 -(4c + 9) -(b + 5) -(3h2 – 2h + 10)
  • 25. Multiplying and FactoringMultiplying and Factoring Using the Distributive PropertyUsing the Distributive Property
  • 26. Observe the rectangle below. Remember that the area A of a rectangle with length l and width w is A = lw. So the area of this rectangle is (4x)(2x), as shown. **************************** The rectangle above shows the example that 4x = x + x + x + x and 2x = x + x 4x 2x A = lw A = (4x)(2x) x + x + x + x x + x NEXT
  • 27. We can further divide the rectangle into squares with side lengths of x. x + x + x + x x + x x2 x2 x2 x2 x2 x2 x2 x2 x + x + x + x x + x Since each side of the squares are x, then x · x = x2 By applying the area formula for a rectangle, the area of the rectangle must be (4x)(2x). This geometric model suggests the following algebraic method for simplifying the product of (4x)(2x). (4x)(2x) = (4 · x)(2 · x) = (4 · 2)(x · x) = 8x2 NEXT Commutative Property Associative Property
  • 28. To simplify a product of monomials (4x)(2x) • Use the Commutative and Associative Properties of Multiplication to group the numerical coefficients and to group like variable; • Calculate the product of the numerical coefficients; and • Use the properties of exponents to simplify the variable product. Therefore (4x)(2x) = 8x2 (4x)(2x) = (4 · 2)(x · x ) = (4 · 2) = 8 (x · x) = x1 · x1 = x1+1 = x2
  • 29. You can also use the Distributive Property for multiplying powers with the same base when multiplying a polynomial by a monomial. Simplify -4y2 (5y4 – 3y2 + 2) -4y2 (5y4 – 3y2 + 2) = -4y2 (5y4 ) – 4y2 (-3y2 ) – 4y2 (2) = Use the Distributive Property -20y2 + 4 + 12y2 + 2 – 8y2 = Multiply the coefficients and add the -20y6 + 12y4 – 8y2 exponents of powers with the same base. Remember, Multiply powers with the same base: 35 · 34 = 35 + 4 = 39
  • 30. Simplify each product. a) 4b(5b2 + b + 6) b) -7h(3h2 – 8h – 1) c) 2x(x2 – 6x + 5) d) 4y2 (9y3 + 8y2 – 11) Remember, Multiplying powers with the same base.
  • 31. Factoring a Monomial from a Polynomial Factoring a polynomial reverses the multiplication process. To factor a monomial from a polynomial, first find the greatest common factor (GCF) of its terms. Find the GCF of the terms of: 4x3 + 12x2 – 8x List the prime factors of each term. 4x3 = 2 · 2 · x · x x 12x2 = 2 · 2 · 3 · x · x 8x = 2 · 2 · 2 · x The GCF is 2 · 2 · x or 4x.
  • 32. Find the GCF of the terms of each polynomial. a) 5v5 + 10v3 b) 3t2 – 18 c) 4b3 – 2b2 – 6b d) 2x4 + 10x2 – 6x
  • 33. Factoring Out a Monomial Factor 3x3 – 12x2 + 15x Step 1 Find the GCF 3x3 = 3 · x · x · x 12x2 = 2 · 2 · 3 · x · x 15x = 3 · 5 · x The GCF is 3 · x or 3x Step 2 Factor out the GCF 3x3 – 12x2 + 15x = 3x(x2 ) + 3x(-4x) + 3x(5) = 3x(x2 – 4x + 5) To factor a polynomial completely, you must factor until there are no common factors other than 1.
  • 34. Use the GCF to factor each polynomial. a) 8x2 – 12x b) 5d3 + 10d c) 6m3 – 12m2 – 24m d) 4x3 – 8x2 + 12x Try to factor mentally by scanning the coefficients of each term to find the GCF. Next, scan for the least power of the variable.
  • 35. Multiplying BinomialsMultiplying Binomials Using the infamous FOIL methodUsing the infamous FOIL method
  • 36. Using the Distributive Property As with the other examples we have seen, we can also use the Distributive Property to find the product of two binomials. Simplify: (2x + 3)(x + 4) (2x + 3)(x + 4) = 2x(x + 4) + 3(x + 4) = 2x2 + 8x + 3x + 12 = 2x2 + 11x + 12 Now Distribute 2x and 3 Distribute x + 4
  • 37. Simplify each product. a) (6h – 7)(2h + 3) b) (5m + 2)(8m – 1) c) (9a – 8)(7a + 4) d) (2y – 3)(y + 2)
  • 38. Multiplying using FOIL Another way to organize multiplying two binomials is to use FOIL, which stands for, “First, Outer, Inner, Last”. The term FOIL is a memory device for applying the Distributive Property to the product of two binomials. Simplify (3x – 5)(2x + 7) First Outer Inner Last = (3x)(2x) + (3x)(7) – (5)(2x) – (5)(7) (3x – 5)(2x + 7) = 6x2 + 21x - 10x - 35 = 6x2 + 11x - 35 The product is 6x2 + 11x - 35
  • 39. Simplify each product using FOIL a) (3x + 4)(2x + 5) b) (3x – 4)(2x + 5) c) (3x + 4)(2x – 5) d) (3x – 4)(2x – 5) Remember, First, Outer, Inner, Last
  • 40. Applying Multiplication of Polynomials. Find the area of the shaded (beige) region. Simplify. area of outer rectangle = (2x + 5)(3x + 1) area of orange rectangle = x(x + 2) area of shaded region = area of outer rectangle – area of orange portion (2x + 5)(3x + 1) – x(x + 2) = 6x2 + 15x + 2x + 5 – x2 – 2x = 6x2 – x2 + 15x + 2x – 2x + 5 = 5x2 + 17x + 5 2x + 5 x + 2 x 3x+1 Use the FOIL method to simplify (2x + 5)(3x + 1) Use the Distributive Property to simplify –x(x + 2)
  • 41. Find the area of the shaded region. Simplify. Find the area of the green shaded region. Simplify. 5x + 8 6x+2 5x x + 6
  • 42. FOIL works when you are multiplying two binomials. However, it does not work when multiplying a trinomial and a binomial. (You can use the vertical or horizontal method to distribute each term.) Simplify (4x2 + x – 6)(2x – 3) Method 1 (vertical) 4x2 + x - 6 2x - 3 -12x2 - 3x + 18 Multiply by -3 8x3 + 2x2 - 12x Multiply by 2x 8x3 - 10x2 - 15x + 18 Add like terms Remember multiplying whole numbers. 312 x 23 936 624 7176
  • 43. Multiply using the horizontal method. (2x – 3)(4x2 + x – 6) = 2x(4x2 ) + 2x(x) + 2x(-6) – 3(4x2) – 3(x) – 3(-6) = 8x3 + 2x2 – 12x – 12x2 – 3x + 18 = 8x3 -10x2 - 15x + 18 The product is 8x3 – 10x2 – 15x + 18 Drawing arrows between terms can help you identify all six products. Method 2 (horizontal)
  • 44. Simplify using the Distributive Property. a) (x + 2)(x + 5) b) (2y + 5)(y – 3) c) (h + 3)(h + 4) Simplify using FOIL. a) (r + 6)(r – 4) b) (y + 4)(5y – 8) c) (x – 7)(x + 9) WORD PROBLEM
  • 45. Find the area of the green shaded region. x + 3 x-3 x x+2

Related Documents