Pressure Calibrator BetaGauge 330-300E
Pressure Calibrator Beta Gauge 330-300E
The BetaGauge 330 is a revolution in pressure calibration technology for the proce...
Pressure Calibrator Beta Gauge 330-300E
 Integrated internal electrically operated pneumatic pump: generates pressure to ...
Pressure Calibrator Beta Gauge 330-300E
Available Pressure
PSIG: -12 to 30 PSI /-0.8 to 2 bar
-12 to 150 PSI /-0.8 to 10 b...
Pressure Calibrator Beta Gauge 330-300E
Pressure
±0.035% of full scale on internal sensor
module dependent for external se...
Pressure Calibrator Beta Gauge 330-300E
Integrated internal electrically operated pneumatic pump:
generates -12 PSI to 300...
Pressure Calibrator Beta Gauge 330-300E
Connections
Pressure: 1/8” female NPT - Stainless Steel
Electrical: standard banan...
Pressure Calibrator Beta Gauge 330-300E
Mailing Address:
PO Box 650
Waterdown, Ontario L0R 2H0
CANADA
Physical Address:
12...
of 8

Measurement and Calibration Test Instruments

Technical-sys retail distributor of calibration test instruments that best providing services like testing instruments repairing services and measuring instruments repairing services, mechanical calibration services and electrical calibration services..
Published on: Mar 4, 2016
Published in: Retail      
Source: www.slideshare.net


Transcripts - Measurement and Calibration Test Instruments

  • 1. Pressure Calibrator BetaGauge 330-300E
  • 2. Pressure Calibrator Beta Gauge 330-300E The BetaGauge 330 is a revolution in pressure calibration technology for the process industries. With the 330, technicians have a small, lightweight calibrator that generates from high vacuum to 300 PSI using a high performance integral electric pump.
  • 3. Pressure Calibrator Beta Gauge 330-300E  Integrated internal electrically operated pneumatic pump: generates pressure to 300 PSI and vacuum to -12 PSI (-0.8 to 20 Bar, -80 to 2000 kPa)  Accuracy of 0.035% FS  Small rugged compact design operates on eight (8) standard Alkaline AA batteries  Only 8” high x 4” wide x 2-3/8” deep (20 cm x 10 cm x 6 cm)  Lightweight at just 2.5 pounds (1.2 kg)  External pressure module interface supports all BetaPort-P pressure modules (requires optional BPPA-100 module adapter)  Pt100 RTD input for temperature measurement, accurate to 0.2°F (0.1°C) (measurement only)  24 V loop power to power device under test  Store and recall 5 user defined setups  Clearbrite LCD with backlight can be configured to display up to 3 variables displayed simultaneously (user controlled)  Ideal for gas custody transfer flow meter applications  Pressure displayed in the user’s choice of 15 engineering units  Switch test is automatic using internal sensor or external pressure module  IP51 Rated  Percent error function Features
  • 4. Pressure Calibrator Beta Gauge 330-300E Available Pressure PSIG: -12 to 30 PSI /-0.8 to 2 bar -12 to 150 PSI /-0.8 to 10 bar -12 to 300 PSI / -0.8 to 20 bar PSIA: mA 0 to 24 mA, max, load 1000 Ohms RTD Pt100-385, -40 to 150˚C Engineering Units psi, bar, mbar, kPa, MPa, kg/cm2, cmH2O@4°C, cmH2O@20°C, mmH2O@4°C,mmH2O@20°C, mmHg@0°C, inH2O@4°C, inH2O@20°C,inH2O@60°F, inHg@0°C Instrument 24 VDC at 24 mA Power Supply Specifications: Ranges
  • 5. Pressure Calibrator Beta Gauge 330-300E Pressure ±0.035% of full scale on internal sensor module dependent for external sensors Add 0.002% FS/˚C outside of 15 to 35˚C mA ±0.015% of reading ± 2 counts (simulation and measurement) Volts ±0.015% of reading ± 2 counts (measurement only) Temperature ±0.1°C (0.2°F) (measurement only) (Pt100 RTD) Specifications: Accuracy
  • 6. Pressure Calibrator Beta Gauge 330-300E Integrated internal electrically operated pneumatic pump: generates -12 PSI to 300 PSI pressure (-0.8 to 20 Bar, -80 to 2000 kPa) Environmental Operating Temperature -10 °C to +50 °C Storage Temperature -20 °C to +60 °C Power Requirements Battery Eight (8) standard Alkaline AA batteries Battery Life 100 pump cycles to 300 PSI minimum 1000 pump cycles to 30 PSI Physical Dimensions 8” high x 4” wide x 2-3/8” deep (20 cm x 10 cm x 6 cm) Weight 2.5 pounds (1.2 kg) Specifications: General
  • 7. Pressure Calibrator Beta Gauge 330-300E Connections Pressure: 1/8” female NPT - Stainless Steel Electrical: standard banana jacks RTD: 4 pin LEMO style External module: 6 pin LEMO style Included Accessories NIST traceable calibration certificate, batteries installed, test leads, test hose, fittings, user guide, carrying case. Specifications: General
  • 8. Pressure Calibrator Beta Gauge 330-300E Mailing Address: PO Box 650 Waterdown, Ontario L0R 2H0 CANADA Physical Address: 1298 6th Concession Rd. W., RR#1 Millgrove, Ontario L0R 1V0 CANADA Contact Us Phone Numbers: Toll Free: 1-866-327-8731 (1-86-MEASURE-1) Tel: 905-575-1941, Fax: 905-575-0386 Email: Sales: sales@technical-sys.com Support: support@technical-sys.com Corporate: info@technical-sys.com

Related Documents